时变位姿下行星齿轮传动系统动应力计算模型及其参数影响研究

doi:10.3901/JME.2021.21.150

摘要/Abstract

摘要： 考虑行星轮系内部非惯性和机体时变位姿外部非惯性的综合影响，推导了任意时变位姿下带有机匣的行星轮系构件运动方程，计入时变啮合刚度、啮合误差、侧隙和啮入冲击，建立了时变位姿下行星齿轮传动系统级动力学模型，并采用精细积分时程法（Precision integration method，PIM）求解得到了动态啮合力序列。根据齿间载荷分配关系进一步得到单齿啮合力序列。最后结合修正Heywood公式与Hertz公式构建了时变位姿下行星齿轮传动系统齿根弯曲动应力和接触动应力计算模型，并研究了机体平飞、滚转和筋斗位姿参数对接触动应力、弯曲动应力的影响规律。结果表明：不同时变位姿参数对弯曲、接触动应力影响显著，且对不同齿轮副影响不同，即加剧了齿轮副间承载不均；筋斗运动角速度对动应力影响比平飞加速度、滚转角速度以及筋斗回转半径对其影响复杂；机匣对动应力影响随加速度增大而增加。研究成果为时变位姿下行星齿轮传动动应力计算与高可靠性设计提供了理论依据。

关键词: 行星齿轮传动, 时变位姿, 动应力, 系统级动力学模型, 非惯性

Abstract: Considering the comprehensive influence of the internal non-inertia of the planetary gear train and the external non-inertial of the body's time-varying posture, the motion equations of the planetary gear train components with casing in any time-varying posture of the body are derived. Taking into account the time-varying meshing stiffness, meshing error, clearance and meshing impact, the planetary gear transmission system-level dynamics model under time-varying posture is established, and the dynamic meshing force sequence is obtained by the precision integration method (PIM). According to the load distribution relationship between teeth, and the single-tooth meshing force sequence is further obtained. Finally, combining the modified Heywood formula and Hertz formula, a calculation model for the tooth root bending dynamic stress and contact dynamic stress of the planetary gear transmission system with time-varying posture is constructed, and the influence laws of the body's level flight, roll and somersault pose parameters on contact dynamic stress and bending dynamic stress are studied. The results indicate that:different time-varying pose parameters have a significant effect on dynamic bending and contact stress, and have different effects on different gear pairs, that is, aggravating the uneven load between gear pairs. The angular velocity of somersault motion has a more complicated effect on dynamic stress than that of horizontal acceleration, roll angular velocity and gyration radius. The effect of casing on dynamic stress increases with the acceleration. The research provides a theoretical basis for dynamic stress calculation and high-reliability design of planetary gears under time-varying postures.

Key words: planetary gear transmission, time-varying posture, dynamic stress, system-level dynamic model, non-inertial

中图分类号:

TG156

魏静, 姜东, 张爱强, 程浩. 时变位姿下行星齿轮传动系统动应力计算模型及其参数影响研究[J]. 机械工程学报, 2021, 57(21): 150-159.

WEI Jing, JIANG Dong, ZHANG Aiqiang, CHENG Hao. Dynamic Stress Calculation Model of Planetary Gear Transmission System under Time-varying Posture and its Parameter Influence Research[J]. Journal of Mechanical Engineering, 2021, 57(21): 150-159.

参考文献

[1] 王成龙, 周建星, 孙文磊, 等. 行星齿轮传动柔性齿圈齿根动应力计算及光纤光栅检测方法[J]. 西安交通大学学报, 2020, 54(6):122-132. WANG Chenglong, ZHOU Jianxing, SUN Wenlei, et al. Dynamic stress calculation and experimental comparative analysis for flexible ring gear root of planetary gear transmission system[J]. Journal of Xi'an Jiaotong University, 2020, 54(6):122-132.
[2] 徐敏, 廖明夫. 机动飞行条件下带挤压油膜阻尼器的Jeffcott转子系统的振动特性[J]. 航空动力学报, 2003(3):394-401. XU Min, LIAO Mingfu. The vibration performance of the Jeffcott rotor system with SFD in maneuver flight[J]. Journal of Aerospace Power, 2003(3):394-401.
[3] LIN F, MENG G. Study on the dynamics of a rotor in a maneuvering aircraft[J]. Journal of Vibration & Acoustics, 2003, 125(3):324-327.
[4] DUCHEMIN M, BERLIOZ A, FERRARIS G. Dynamic behavior and stability of a rotor under base excitation[J]. Journal of Vibration & Acoustics, 2006, 128(5):576-585.
[5] DRIOT N, LAMARQUE C, BERLIOZ A. Theoretical and experimental analysis of a base-excited rotor[J]. Journal of Computational & Nonlinear Dynamics, 2006, 1(3):257-263.
[6] 祝长生, 陈拥军. 机动飞行时发动机转子系统动力学统一模型[J]. 航空动力学报, 2009, 24(2):371-377. ZHU Changsheng, CHEN Yongjun. General dynamic model of aeroengine's rotor system during maneuvering flight[J]. Journal of Aerospace Power, 2009, 24(2):371-377.
[7] YANG Y, REN X, QIN W, et al. Analysis on the nonlinear response of cracked rotor in hover flight[J]. Nonlinear Dynamics, 2010, 61(1-2):183-192.
[8] HAN Q, CHU F. Dynamic response of cracked rotor-bearing system under time-dependent base movements[J]. Journal of Sound and Vibration, 2013, 332(25):6847-6870.
[9] DAKEL M, BAGUET S, DUFOUR R. Steady-state dynamic behavior of an on-board rotor under combined base motions[J]. Journal of Vibration and Control, 2014, 20(15):2254-2287.
[10] 蒋科坚, 祝长生, 乔晓利, 等. 移动载体上电磁轴承-转子系统的基础激励振动主动抑制[J]. 机械工程学报, 2014, 50(11):108-118. JIANG Kejian, ZHU Changsheng, QIAO Xiaoli, et al. Suppressing vibration due to base motion for active magnetic bearings-rotor system equipped on moving carrier[J]. Journal of Mechanical Engineering, 2014, 50(11):108-118.
[11] HOU L, CHEN Y, CAO Q. Nonlinear vibration phenomenon of an aircraft rub-impact rotor system due to hovering flight[J]. Communications in Nonlinear Science & Numerical Simulation, 2014, 19(1):286-297.
[12] 白雪川, 曹树谦, 杨蛟, 等. 机动飞行时航空发动机反向旋转双转子动力学实验研究[J]. 机械科学与技术, 2015, 34(4):623-628. BAI Xuechuan, CAO Shuqian, YANG Jiao, et al. Experiment research on aero-engine counter-rotating dual-rotor[J]. Mechanical Science and Technology for Aerospace Engineering, 2015, 34(4):623-628.
[13] 李小彭, 李加胜, 李木岩, 等. 机动飞行中转子轴承系统新型碰摩的动力学行为[J]. 东北大学学报(自然科学版), 2017, 38(8):1118-1122. LI Xiaopeng, LI Jiasheng, LI Muyan, et al. Dynamics of rotor bearing system with new rubbing model in maneuvering flight[J]. Journal of Northeastern University(Natural Science), 2017, 38(8):1118-1122.
[14] HAN B, DING Q. Forced responses analysis of a rotor system with squeeze film damper during flight maneuvers using finite element[J]. Mechanism & Machine Theory, 2018, 122:233-251.
[15] HAN Q, CHU F. Dynamic behaviors of a geared rotor system under time-periodic base angular motions[J]. Mechanism & Machine Theory, 2014, 78:1-14.
[16] QIU X, HAN Q, CHU F. Dynamic modeling and analysis of the planetary gear under pitching base motion[J]. International Journal of Mechanical Sciences, 2018, 141:31-45.
[17] 魏静, 史磊, 张爱强, 等. 飞行环境非惯性系下行星齿轮传动系统耦合动力学建模及其动态特性[J]. 机械工程学报, 2019, 55(23):162-172. WEI Jing, SHI Lei, ZHANG Aiqiang, et al. Modeling and dynamic characteristics of planetary gear transmission in non-inertial system of aerospace environment[J]. Journal of Mechanical Engineering, 2019, 55(23):162-172.
[18] ZHANG A, WEI J, SHI L, et al. Modeling and dynamic response of parallel shaft gear transmission in non-inertial system[J]. Nonlinear Dynamics, 2019, 98(2):997-1017.
[19] KAHRAMAN A, LIGATA H, SINGH A. Influence of ring gear rim thickness on planetary gear set behavior[J]. Journal of Mechanical Design, 2010, 132(2):021002.
[20] 秦大同, 周志刚, 杨军, 等. 随机风载作用下风力发电机齿轮传动系统动态可靠性分析[J]. 机械工程学报, 2012, 48(3):1-8. QIN Datong, ZHOU Zhigang, YANG Jun, et al. Time-dependent reliability analysis of gear transmission system of wind turbine under stochastic wind load[J]. Journal of Mechanical Engineering, 2012, 48(3):1-8.
[21] 李发家, 朱如鹏, 鲍和云, 等. 行星齿轮系动力学特性分析及试验研究[J]. 南京航空航天大学学报, 2012, 44(4):511-519. LI Fajia, ZHU Rupeng, BAO Heyun, et al. Dynamics characteristics and experiment research on planetary gear system[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2012, 44(4):511-519.
[22] 谭援强, 胡聪芳, 张跃春, 等. 封闭差动行星齿轮箱动态均载性能试验研究[J]. 机械工程学报, 2016, 52(9):28-35. TAN Yuanqiang, HU Congfang, ZHANG Yuechun, et al. Testing research on dynamic load sharing performance of encased differential planetary gearbox[J]. Journal of Mechanical Engineering, 2016, 52(9):28-35.
[23] 张义民, 王婷, 黄婧. 采煤机摇臂系统行星轮系疲劳可靠性灵敏度设计[J]. 东北大学学报(自然科学版), 2016, 37(10):1426-1431. ZHANG Yimin, WANG Ting, HUANG Jing. Fatigue reliability-based sensitivity design of planet gear for shearer rocker arm system[J]. Journal of Northeastern University(Natural Science), 2016, 37(10):1426-1431.
[24] LIN P, LIN H, OSWALD F, et al. Using dynamic analysis for compact gear design[J]. Journal of Mechanical Design, 2002, 124(1):91-97.
[25] CORNELL R. Compliance and stress sensitivity of spur gear teeth[J]. Journal of Mechanical Design, 1981, 103(2):447-459.
[26] HAN Q, ZHAO J, CHU F. Dynamic analysis of a geared rotor system considering a slant crack on the shaft[J]. Journal of Sound & Vibration, 2012, 331(26):5803-5823.
[27] WEI J, ZHANG A, QIN D, et al. A coupling dynamics analysis method for a multistage planetary gear system[J]. Mechanism and Machine Theory, 2017, 110:27-49.
[28] 贺朝霞, 常乐浩, 刘岚. 耦合箱体振动的行星齿轮传动系统动态响应分析[J]. 华南理工大学学报(自然科学版), 2015, 43(9):128-134+148. HE Zhaoxia, CHANG Lehao, LIU Lan. Dynamic response analysis of planetary gear transmission system coupled with gearbox vibrations[J]. Journal of South China University of Technology(Natural Science Edition), 2015, 43(9):128-134+148.
[29] 陈再刚. 行星轮系齿轮啮合非线性激励建模和振动特征研究[D]. 重庆:重庆大学, 2013. CHEN Zaigang. Study on gear mesh nonlinear excitation modelling and vibration features of planetary gear system[D]. Chongqing:Chongqing University, 2013.
[30] 张策. 机械原理与机械设计[M]. 北京:机械工业出版社, 2018. ZHANG Ce. Mechanical principle and mechanical design[M]. Beijing:China Machine Press, 2018.
[31] 戴麟. 相位调谐与啮入冲击对行星齿轮系统辐射噪声影响的研究[D]. 南京:南京航空航天大学, 2016. DAI Lin. Research on the effect of phase adjustment and meshing impact on noise radiation in planetary gear transmission[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2016.
[32] 朱增宝, 朱如鹏, 李应生, 等. 安装误差对封闭差动人字齿轮传动系统动态均载特性的影响[J]. 机械工程学报, 2012, 48(3):16-24. ZHU Zengbao, ZHU Rupeng, LI Yingsheng, et al. Impact of installation error on dynamics load sharing characteristic for encased differential herringbone train[J]. Journal of Mechanical Engineering, 2012, 48(3):16-24.