变双曲圆弧齿线圆柱齿轮专用机床的模块化设计

doi:10.3901/JME.2021.03.077

机械工程学报 ›› 2021, Vol. 57 ›› Issue (3): 77-86.doi: 10.3901/JME.2021.03.077

扫码分享

变双曲圆弧齿线圆柱齿轮专用机床的模块化设计

张海燕, 侯力, 罗岚, 梁爽, 冷松

四川大学机械工程学院成都 610065

收稿日期:2020-03-29 修回日期:2020-12-01 出版日期:2021-02-05 发布日期:2021-03-16
通讯作者: 侯力(通信作者),男,1956年出生,博士,教授,博士研究生导师。主要研究方向为机电一体化、机械传动。E-mail:houli4@163.com
作者简介:张海燕,女,1983年出生,博士研究生。主要研究方向为机构学及新型传动技术。E-mail:liuyunzhy@163.com
基金资助:
国家自然科学基金资助项目（51875370）。

Modular Design for Machine Tools of Variable Hyperbolic Circular-arc-tooth-trace Cylindrical Gear

ZHANG Haiyan, HOU Li, LUO Lan, LIANG Shuang, LENG Song

School of Mechanical Engineering, Sichuan University, Chengdu 610065

Received:2020-03-29 Revised:2020-12-01 Online:2021-02-05 Published:2021-03-16

摘要/Abstract

摘要： 变双曲圆弧齿线圆柱齿轮具有小型、重载、高可靠性等特点，应用前景广阔。为推广这种新型传动的应用，开展针对变双曲圆弧齿线圆柱齿轮专用机床的模块化设计方法的研究。根据此专用机床的功能需求，以设计概念为主线，以功能-原理-行为-结构设计过程模型为映射及相关性分析原则获得系统零部件的综合相关关系矩阵，在此基础上应用间隙统计和自组织神经网络映射相结合的方法对系统进行聚类，得到多种模块划分方案。最后，基于逼近理想解排序法对模块划分方案进行了优选，得到了最理想的划分方案。对变双曲圆弧齿线圆柱齿轮专用机床的模块化方法的研究能够实现此机床的快速设计，为机床的可重构奠定了基础。

关键词: 齿轮机床, 新型传动, 模块化设计, 可重构机床

Abstract: Variable hyperbolic circular-arc-tooth-trace cylindrical gear with the features of small size, heavy load and high reliability and broad application prospects. The application of new type of transmission is to be extended. A modular design method for the mechanical system of the variable hyperbolic circular cylindrical gear special machine tools is developed. According to the functional requirements of this special machine tools, the comprehensive correlation matrix of system parts is obtained by taking the design concept as the main line and the function-principle-behavior-structure design process model as the principle of mapping and correlation analysis. On the basis of this, the system is divided into modules by the method of gap static and self-organizing map(SOM), and a variety of modules are divided. Finally, based on the technique for order preference by similarity to an ideal solution(TOPSIS) method, the modular partition solution is evaluated and the most suitable partition scheme is obtained. The rapid design and reconfiguration of the machine tools are realized by the research of modular partition method of the special machine tools for variable hyperbolic circular-arc-tooth-trace cylindrical gear.

Key words: gear machine tools, new transmission, modular design, reconfigurable machine tools

中图分类号:

TP391

张海燕, 侯力, 罗岚, 梁爽, 冷松. 变双曲圆弧齿线圆柱齿轮专用机床的模块化设计[J]. 机械工程学报, 2021, 57(3): 77-86.

ZHANG Haiyan, HOU Li, LUO Lan, LIANG Shuang, LENG Song. Modular Design for Machine Tools of Variable Hyperbolic Circular-arc-tooth-trace Cylindrical Gear[J]. Journal of Mechanical Engineering, 2021, 57(3): 77-86.

参考文献

[1] 徐小明,张武翔,丁希仑. 基于模块化的缠绕机设计方法[J]. 北京航空航天大学学报,2018,44(4):746-758. XU Xiaoming,ZHANG Wuxiang,DING Xilun. Modular design method for filament winding machine[J]. Journal of Beijing University of Aeronautics and Astronautics,2018,44(4):746-758.
[2] HUANG C. Overview of modular product development[J]. Proceedings of the National Science Council,2000,24(3):149-165
[3] MEHRABI M,ULSOY A,KOREN Y. Reconfigurable manufacturing systems and their enabling technologies[J]. Int. J. Manufacturing Technology and Management, 2000(1)1:114-131.
[4] BRUSHER G, KABAMBA P,ULSOY A. Coupling between the modeling and controller-design problems- part I:Analysis[J]. Transactions of the ASME,1997(119):498-502.
[5] 黄华,李爱平,徐立云. 可重构机床模块划分研究[J]. 农业机械学报,2010,41(7):198-204. HUANG Hua,LI Aiping,XU Liyun. Modular division oriented to reconfigurable machine tools[J]. Transactions of the Chinese Society for Agricultural Machinery,2010,41(7):198-204.
[6] 王鹏家,巩亚东,刘永贤,等. 基于谱系聚类的数控机床模块划分系统[J]. 东北大学学报,2014(5):739-742. WANG Pengjia,GONG Yadong,LIU Yongxian,et al. Module division system of CNC machine tools based on hierarchical clustering[J]. Journal of Northeastern University,2014(5):739-742.
[7] 高羡明,洪军,刘瑞萍, 等. 多准则数控机床模块谱系聚类的划分方法研究[J]. 西安交通大学学报,2011,45(5):131-136. GAO Xianming,HONG Jun,LIU Ruiping,et al. Numerical control machine tool module partition with multi-criteria pedigree clustering method[J]. Journal of Xi'an Jiaotong University,2011,45(5):131-136.
[8] 赵斐. 变双曲圆弧齿线圆柱齿轮成形理论研究及啮合特性分析[D]. 成都:四川大学,2018. ZHAO Fei. Research on forming theory and meshing characteristics of variable-hyperbolic-circular-arc-tooth cylindrical gear[D]. Chengdu:Sichuan University,2018.
[9] PAHL G,BEITZ W. Engineering design[M]. London:Design Council,1984.
[10] 方晓耿,谌炎辉,谢国进. 模块划分的多目标评价方法研究[J]. 广西科技大学学报,2017,28(4):119-123. FANG Xiaogeng, CHEN Yanhui, XIE Guojin. Research on multi-objective evaluation method of module partition[J]. Journal of Guangxi University of Science and Technology,2017,28(4):119-123.
[11] GAO Yicong, FENG Yixiong, TAN Jianrong. Product modular design incorporating preventive maintenance issues[J]. Chinese Journal of Mechanical Engineering,2016,29(2):406-420.
[12] 滕晓艳. 复杂产品系统的模块划分方法研究[D]. 哈尔滨:哈尔滨工程大学,2011. TENG Xiaoyan. Research on module partition method of CoPS[D]. Harbin:Harbin Engineering University,2011.
[13] KOHONEN T. Self-organizing maps[M]. Berlin,Heidelberg:Springer-Verlag,1995.
[14] GERMEN E,BASARAN M,FIDAN M.Sound based induction motor fault diagnosis using Kohone self-organizing map[J]. Mechanical Systems and Signal Processing,2014,46(1):45-58.
[15] SARLIN P. A weighted SOM for classifying data with instance-varying importance[J]. International Journal of Machine Learning and Cybernetics,2014,5(1):101-110.
[16] 胡丛林. 产品设计结构聚类优化算法研究[D]. 武汉:武汉科技大学,2014. HU Conglin. A dissertation submitted in partial fulfillment of the requirements for the degree of master in engineering[D]. Wuhan:Wuhan University of Science and Technology,2014.
[17] 胡鑫杰,路川,齐斌. 基于SOM的神经网络的网络舆情信息分类模型[J]. 兵器装备工程学报,2019,40(3):108-111. HU Xinjie,LU Chuan,QI Bin. Classification model of internet public opinion information based on SOM neural network[J]. Journal of Ordnance Equipment Engineering,2019,40(3):108-111.
[18] 马梅,刘东苏,李慧. 基于大数据的网络舆情分析系统模型研究[J]. 情报科学,2016,36(3):25-28. MA Mei,LIU Dongsu,LI Hui. Research on the network public opinion analysis system model based on big data[J]. Information Science,2016,36(3):25-28.
[19] SONG H,NAI Q J,ZHANG B,et al. Formation,evolution and control of network public opinion for emergencies[J]. Journal of Henan Institute of Engineering,2010(5):78-89.
[20] 张袅娜,郭孔辉,丁海涛. 基于多源信息融合的行驶工况识别及其在整车转矩分配中的应用[J]. 机械工程学报,2017,53(24):135-143. ZHANG Niaona, GUO Konghui,DING Haitao. Driving cycle recognition algorithm based on multi-source information fusion and application in vehicle torque distribution[J]. Journal of Mechanical Engineering,2017,53(24):135-143.
[21] 李颖,应保胜,容芷君,等. 基于SOM的产品设计结构模块划分及其评价[J]. 武汉科技大学学报,2018,41(4):301-306. LI Ying,YING Baosheng,RONG Zhijun,et al. SOM-based product design structure clustering and its evaluation[J]. Journal of Wuhan University of Science and Technology,2018,41(4):301-306.
[22] 程贤福,万冲,邱浩洋,等. 基于密度算法和DSM的模块划分方法[J]. 华东交通大学学报,2019,36(2):105-110. CHENG Xianfu,WAN Chong,QIU Haoyang,et al. A module partition approach based on density algorithm and design structure matrix[J]. Journal of East China Jiaotong University,2019,36(2):105-110.
[23] 梅晓朋面向客户需求的数控机床模块化设计方法研究[D]. 沈阳:东北大学,2015. MEI Xiaopeng.Modular design research of CNC machine tools oriented to customer requirements[D]. Shenyang:Northeastern University,2015.
[24] CHENG Xianfu,XIAO Renbin,WANG Haolun.A method for coupling analysis of association modules in product family design[J]. Journal of Engineering Design,2018,29(6):327-352.
[25] 郏维强,刘振宇,刘达新,等. 基于模糊关联的复杂产品模块化设计方法及其应用[J]. 机械工程学报,2015,51(5):130-142. JIA Weiqiang,LIU Zhenyu,LIU Daxin,et al. Modular design method and application for complex product based on fuzzy correlation analysis[J]. Journal of Mechanical Engineering,2015,51(5):130-142.

变双曲圆弧齿线圆柱齿轮专用机床的模块化设计

Modular Design for Machine Tools of Variable Hyperbolic Circular-arc-tooth-trace Cylindrical Gear

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 10

编辑推荐

Metrics

本文评价

[1]	姚立纲, 李敬仪, 东辉. 气动软体机械臂模块变刚度性能分析[J]. 机械工程学报, 2020, 56(9): 36-44.
[2]	沈大刚. 一种新型智能配电终端的设计与研究[J]. 电气工程学报, 2016, 11(6): 48-54.
[3]	李先广;刘飞;曹华军. 齿轮加工机床的绿色设计与制造技术[J]. , 2009, 45(11): 140-145.
[4]	戚赟徽;王淑旺;刘光复;刘志峰;刘红. 面向能量优化的产品结构要素组合设计[J]. , 2008, 44(1): 161-167.
[5]	高卫国;徐燕申;陈永亮;章青. 广义模块化设计原理及方法[J]. , 2007, 43(6): 48-54.
[6]	黎旭;徐燕申;黄艳群. 广义模块化设计及报价系统通用平台的构建及其应用[J]. , 2007, 43(4): 205-210.
[7]	黄田;李曚;吴孟丽;梅江平;赵学满;Hu S. Jack. 可重构PKM模块的选型原则——理论与实践[J]. , 2005, 41(8): 36-41.
[8]	吴训成;陈志恒;胡宁. 曲线齿锥齿轮点啮合齿面主动控制加工技术[J]. , 2005, 41(10): 97-101.
[9]	潘双夏;高飞;冯培恩. 批量客户化生产模式下的模块划分方法研究[J]. , 2003, 39(7): 1-6.
[10]	唐涛　刘志峰　刘光复　刘蕾. 绿色模块化设计方法研究[J]. , 2003, 39(11): 149-154.