新型移动式热湿拉强度测试仪研制

doi:10.3901/JME.2020.14.019

机械工程学报 ›› 2020, Vol. 56 ›› Issue (14): 19-25.doi: 10.3901/JME.2020.14.019

扫码分享

新型移动式热湿拉强度测试仪研制

刘扬¹, 鲁德才¹, 梁博¹, 王傲², 石德全², 李大勇²

1. 哈尔滨理工大学荣成学院荣成 264300;
2. 哈尔滨理工大学材料科学与工程学院哈尔滨 150080

收稿日期:2019-07-24 修回日期:2020-04-14 出版日期:2020-07-20 发布日期:2020-08-12
通讯作者: 鲁德才(通信作者),男,1988年出生。主要研究方向为铸造过程快速检测技术。E-mail:hlgldc@163.com
作者简介:刘扬,女,1986年出生,讲师。主要研究方向为计算机智能信息处理。E-mail:382252642@qq.com
基金资助:
黑龙江省普通本科高等学校青年创新人才培养计划（UNPYSCT-2018205）和黑龙江省普通高校基本科研业务费专项（LGYC2018JC052）资助项目。

Development of New Movable Hot-wet Tensile Strength Tester

LIU Yang¹, LU Decai¹, LIANG Bo¹, WANG Ao², SHI Dequan², LI Dayong²

1. Harbin University of Science and Technology Rongcheng Campus, Rongcheng 264300;
2. Material Science and Engineering College, Harbin University of Science and Technology, Harbin 150080

Received:2019-07-24 Revised:2020-04-14 Online:2020-07-20 Published:2020-08-12

摘要/Abstract

摘要： 热湿拉强度是表征型砂力学性能的重要指标之一，在传统的热湿拉强度设备研究中，设计者多数将测试仪定位在实验室检测或现场的检测，使其无法兼顾实验室和生产现场的检测；同时，传统的测试仪多数存在无法实时观察型砂热湿拉强度曲线动态变化的问题，而只能获得到一个强度值，这就使得试验者无法准确掌控整个测试过程。为此，设计一款新型移动式热湿拉强度测试仪，既可满足实验室检测又能适应生产现场检测，还能实时观察热湿拉强度曲线动态变化，具有一定意义。测试仪以GB/T 2684—2009《铸造用砂及混料试验方法》为基准，以型砂微变形理论为设计基础，通过计算机、PLC、高精步进电机、传感器、采集器等完成硬件的设计，以DELPHI为编程语言完成测试界面及软件设计，稳定的实现了对标准试样测试过程中的数据实时采集、处理及保存等功能，并实时绘制热湿拉强度-时间-温度曲线。整体结构采用框架式，在保障结构稳定性的同时极大程度减轻整体重量，且测试仪底部配有万向轮便于测试人员移动。最后，用自主研制的新型移动式热湿拉强度测试仪与某品牌测试仪进行了对比试验，采用标准方法进行制样，试验结果表明，本测试仪具有较高的精确度和精密度，且操作更加方便。

关键词: 热湿拉强度测试仪, 移动式, 实时曲线, PLC

Abstract: Hot-wet tensile strength is one of the important indexes to characterize the mechanical properties of molding sand. In the study of traditional hot-wet tensile strength equipment, most designers design the tester to only be used for laboratory or on the spot, so make it impossible to test both in laboratory and the production site. At the same time, most of the traditional testers cannot observe the dynamic change of the hot-wet tensile strength curve in real time, but can only obtain one strength value, which makes the tester unable to accurately control the whole testing process. Therefore, it is significant to design a new type of mobile hot-wet tensile strength tester, which can not only meet the needs of laboratory testing, but also meet the needs of production site testing, and can observe the dynamic changes of hot-wet tensile strength curve in real time. The tester is designed on the basis of GB/T 2684—2009 Test Methods for Foundry Sands and Molding Mixtures and the theory of molding sand micro deformation. The hardware is designed by PC, PLC, high precision stepping motor, sensor and collector, and the software is designed by DELPHI programming language. The tester can stably realize the functions of real-time data collection, processing and storage in the process of testing standard samples, and draw the curves of hot-wet tensile strength and temperature with time in real time. The overall structure adopts frame type, which can greatly reduce the overall weight while ensuring the stability of the structure, and the bottom of the tester is equipped with universal wheels to facilitate the movement of the tester. Finally, the new type of self-developed mobile hot-wet tensile strength tester is compared with a brand of tester, and the standard method is used for sample preparation. The test results show that the tester has high accuracy and precision, and the operation is more convenient.

Key words: hot-wet tensile strength tester, mobile type, real-time curve, PLC

中图分类号:

TG23

刘扬, 鲁德才, 梁博, 王傲, 石德全, 李大勇. 新型移动式热湿拉强度测试仪研制[J]. 机械工程学报, 2020, 56(14): 19-25.

LIU Yang, LU Decai, LIANG Bo, WANG Ao, SHI Dequan, LI Dayong. Development of New Movable Hot-wet Tensile Strength Tester[J]. Journal of Mechanical Engineering, 2020, 56(14): 19-25.

参考文献

[1] 石德全, 李大勇, 董静薇, 等. 湿型砂质量参数智能测试车的研制[J]. 机械工程学报, 2005, 41(6):194-197. SHI Dequan, LI Dayong, DONG Jingwei, et al. Development of an intelligent apparatus of testing the quality parameters of green sand[J]. Journal of Mechanical Engineering, 2005, 41(6):194-197.
[2] 长春市非金属材料试验机制造厂. 型砂受热湿拉强度试验仪[J]. 铸造, 1966(10):28-29. Changchun Nonmetal Material Testing Machine Factory. Hot-wet tensile strength tester for molding sand[J]. Casting and Forging Machinery Communication, 1966(10):28-29.
[3] 黄天佑, 金宏伟, 胡永沂, 等. 用于测定黏土湿型砂的气动热湿拉强度测试仪:中国, 200520113536. 0[P]. 2006-11-15. HUANG Tianyou, JIN Hongwei, HU Yongyi, et al. Pneu-matic thermohygroscopic strength tester for measuring clay wet sand:China, 200520113536. 0[P]. 2006-11-15.
[4] 金宏伟, 李华, 黄天佑, 等. 新型湿型砂热湿拉强度测试仪的研制[J]. 铸造, 2006, 55(8):825-827. JIN Hongwei, LI Hua, HUANG Tianyou, et al. New-type apparatus for the measurement of wet tensile strength of green sand[J]. Foundry, 2006, 55(8):825-827.
[5] 薛江. 一种智能热湿拉强度仪:中国, 201610607915.8[P]. 2016-12-21. XUE Jiang. An intelligent hot-wet tensile strength meter:China, 201610607915. 8[P]. 2016-12-21.
[6] MELINDA E G. Critical assessment of current metalca-sting green sand system control and monitoring processes[D]. Pennsylvania:The Pennsylvania State University, 2009.
[7] NING L, BAILIN W, CHEE P T. Tensile strength characteristics of unsaturated sands[J]. American Society of Civil Engineers, 2007, 133(2):139-146.
[8] SAM R, MO K, KALAMAZOO, et al. Dynamic testing of green sand[J]. Modern Casting, 2015, 9(15):91-96.
[9] RAMANA M V, RAO S V, PRASAD N L. Parametric optimization of green sand moulding process based on wet tensile strength:A full factorial experimental app-roach[J]. International Journal of Engineering and Research & Technology, 2013, 2(12):2544-2548.
[10] DAS B M, YEN S C, DASS R N. Brazilian tensile strength test of lightly cemented sand[J]. Canadian Geotechnical Journal, 1996, 33(1):167-171.
[11] KUMAR P, NAGARAJAN K, STALLON D S. Embedded based system for testing tensile strength of foundry sand[J]. Materials Science Forum, 2018, 3(6):168-171.
[12] ATTILA D, VASILE L D, ANDERS E W. New possibilities with improved green sand testing equipment[J]. International Journal of Engineering Sciences & Research, 2018, 925(6):504-511.
[13] 中华人民共和国工业和信息化部. JB/T 9227-2013. 铸造用膨润土[S]. 北京:机械工业出版社, 2013. Ministry of Industry and Information Technology of the People's Republic of China. JB/T 9227-2013. Bentonite for foundry[S]. Beijing:China Machine Press, 2013.
[14] 中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会. GB/T 2684-2009. 铸造用砂及混料试验方法[S]. 北京:中国标准出版社, 2009. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of China. GB/T 2684-2009. Test methods for foundry sands and molding mixtures[S]. Beijing:China Standards Press, 2009.
[15] 雷大军. 基于可编程控制器的步进电机控制[J]. 电子测试, 2016, 19(8):20-21. LEI Dajun. The control about step motor based on PLC[J]. Electronic Test, 2016, 19(8):20-21.

新型移动式热湿拉强度测试仪研制

Development of New Movable Hot-wet Tensile Strength Tester

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics

本文评价

[1]	刘辛军, 谢福贵, 杨迪, 解增辉, 孟齐志. 现代科技创新研究模式探讨[J]. 机械工程学报, 2022, 58(11): 1-10.
[2]	孙殿柱, 沈江华, 李延瑞, 林伟. 序列图像约束的点云初始配准方法[J]. 机械工程学报, 2020, 56(9): 215-222.
[3]	谢福贵, 梅斌, 刘辛军, 张加波, 乐毅. 一种大型复杂构件加工新模式及新装备探讨[J]. 机械工程学报, 2020, 56(19): 70-78.
[4]	玛斯库达&#;阿布力哈孜;阿达依&#;谢尔亚孜旦. 移动式电化学光整加工整平机理的研究[J]. , 2013, 49(17): 182-186.
[5]	郭庆鼎;唐光谱;唐元钢;傅建国. 基于自适应控制的双电动机同步传动控制技术的研究[J]. , 2002, 38(2): 79-81.
[6]	孙宜标;郭庆鼎. 基于加速度补偿的龙门移动式镗铣床双直线电动机滑模解耦同步控制研究[J]. , 2002, 38(12): 39-43.