[1] MOTOHASHI H,EMURA T,and SAKAI T,A study on zero-backlash reduction mechanism[J]. Bulletin of JSME,1986,29(255):3189-3194. [2] SIMON V. Influence of tooth errors and misalignments on tooth contact in spiral bevel gears[J]. Mechanism and Machine Theory,2008,43(10):1253-1267. [3] ZHONG Chunhao,YANG Xiajun. Driving torque reduction in linkage mechanisms using joint compliance for robot head[J]. Chinese Journal of Mechanical Engineering,2015,28(5):888-895. [4] DENG Xingqiao,WANG Jie,WANG Shike,et al. Investigation on the backlash of roller enveloping hourglass worm gear:theoretical analysis and experiment[J]. Journal of Mechanical Design,2019,141(5):053302-053302-11. [5] ZHU Ning,SUN Shouguang,LI Qiang,et al. Theoretical research and experimental validation of elastic dynamic load spectra on bogie frame of high-speed train[J]. Chinese Journal of Mechanical Engineering,2016,29(3):489-506. [6] DUDAS L. Modelling and simulation of a new worm gear drive having point-like contact[J]. Engineering with Computers,2012,29(3):251-272. [7] CHEN Yangzhi,LUO Liang,HU Qiang. The contact ratio of a space-curve meshing-wheel transmission mechanism[J]. Journal of Mechanical Design,2009,131(7):074501-074505. [8] LIN Wansung,SHIH Yipei,LEE Jyhjone. Design of a two-stage cycloidal gear reducer with tooth modifications[J]. Mechanism and Machine Theory,2014,79(5):184-97. [9] LITVIN F,FUENTES A,HAYASAKA K. Design,manufacture,stress analysis,and experimental tests of low-noise high endurance spiral bevel gears[J]. Mechanism and Machine Theory,2006,41(1):83-118. [10] 魏静,赖育彬,秦大同,等.齿廓修形斜齿轮副啮合刚度解析计算模型[J].振动与冲击,2018,37(10):94-101,116. WEI Jing,LAI Yubin,QIN Datong,et al. Analytical model of the mesh stiffness of helical gear pair after tooth profile modification[J]. Journal of Vibration and Shock,2018,37(10):94-101,116. [11] 魏静,王刚强,秦大同,等.考虑修形的斜齿轮系统非线性激励与动力学特性研究[J].振动工程学报,2018,31(4):561-572. WEI Jing,WANG Gangqiang,QIN Datong,et al. Nonlinear excitation and dynamic characteristics of helical gear system with considering modification[J]. Journal of Vibration Engineering,2008,31(4):561-572. [12] 魏静,杨攀武,秦大同,等.柔性销轴式人字齿星型轮系均载特性[J].哈尔滨工业大学学报,2018,50(7):144-153. WEI Jing,YANG Panwu,QIN Datong,et al. Load sharing characteristics of the herringbone star gear transmission system with flexible pin[J]. Journal of Harbin Institute of Technology,2008,50(7):144-153. [13] DENG Xingqiao,ZHU Weibing,CHEN Yonghong,et al. Optimal design for an end face engagement worm gear with multiple worm-wheel meshing[J]. Chinese Journal of Mechanical Engineering,2017,30(1):144-151. [14] DENG Xingqiao,FENG Zhipeng. Theory study of a novel planar enveloping internal-meshing worm drive[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2017,39(6):4807-4818. [15] DENG Xingqiao,WANG Jinge,HORSTEMEYER M F,et al. Parametric study of meshing characteristics with respect to different meshing rollers of the anti-backlash double-roller enveloping worm gear[J]. Journal of Mechanical Design,2012,134(8):081004-1-081004-12. [16] DENG Xingqiao,WANG Jueling,WANG Jinge,et al. Parametric analysis of the end face engagement worm gear[J]. Chinese Journal of Mechanical Engineering,2015,28(6):1177-1185. [17] DENG Xingqiao,WANG Jinge,HORSTEMEYER M F,et al. Modification design method for an enveloping hourglass worm with consideration of machining and misalignment errors[J]. Chinese Journal of Mechanical Engineering,2013,26(5):948-956. [18] MEDVEDEV V I,VOLKOV A E,VOLOSOVA M A,et al. Mathematical model and algorithm for contact stress analysis of gears with multi pair contact[J]. Mechanism and Machine Theory,2015,86(2):1561-1571. |