Loading...
CN: 11-2187/TH
ISSN: 0577-6686
Nav
Home
About the Journal
Guide for Authors
Ethics Statement
Submission Guideline
Submit your Article
Articles & Issues
Latest Issues
All Issue
Contacts Us
E-mail Alert
中文
Journal of Mechanical Engineering
Download Cover
2025, Volume 61 Issue 23
Publication:05 December 2025
Previous Issue
Next Issue
Column:
Meshing Stiffness of Non-circular Planetary Transmission System Considering Random Pitting Distribution
MO Shuai, LI Yaxin, BAI Daixin, CHEN Sujiao, YAO Bowei, SHI Wenai, PENG Nanjiang, ZHANG Wei
2025, 61 (23): 1-10. doi:
10.3901/JME.2025.23.001
Abstract
(
110
)
PDF
(87602KB) (
106
)
Optimization of Design Parameters for the Balance Mechanism of the Autonomous Refueling Arm of Tank Trucks for Residual Vibration Suppression
YUAN Mingxin, JIANG Weiyu, WANG Wei, LI Jie, SHEN Yi
2025, 61 (23): 11-26. doi:
10.3901/JME.2025.23.011
Abstract
(
82
)
PDF
(84147KB) (
71
)
Mechanism of Improving Joint Motion Performance of Variable Stiffness Robot Based on EMG Signal
ZHANG Ming, GUO Huaichao, WEN Jianming, SUN Feng, SUN Xingwei, FANG Lijin, OKA Koichi
2025, 61 (23): 27-40. doi:
10.3901/JME.2025.23.027
Abstract
(
74
)
PDF
(81728KB) (
94
)
Topology Design Method for Parallel Mechanisms with Symbolic Forward Position Solution and Motion Decoupling Based on the Minimum Sub-kinematic-chain
LI Ju, SHE Junjie, SHEN Huiping, ZENG Boxiong, YANG Tingli
2025, 61 (23): 41-57. doi:
10.3901/JME.2025.23.041
Abstract
(
55
)
PDF
(16805KB) (
67
)
Chain-of-thought Paradigm Text-based Multimodal Intelligent Agent for Equipment Operations and Maintenance
HUANG Jinfeng, WANG Chengcheng, HE Hongliang, WANG Xu, LI Qi, YANG Kangding, WANG Kai, ZHANG Feibin, QIN Zhaoye, CHU Fulei
2025, 61 (23): 58-74. doi:
10.3901/JME.2025.23.058
Abstract
(
405
)
PDF
(76293KB) (
296
)
Research on the Axis Motion of the Foil Bearing Rotor System in Fuel Cell Air Compressors under Acceleration Variable Load Conditions
XIONG Wanli, WANG Jian, XUE Hainan, CHEN Zhenyu, XUE Jian
2025, 61 (23): 75-86. doi:
10.3901/JME.2025.23.075
Abstract
(
51
)
PDF
(183587KB) (
31
)
Investigation on the Effect of Rail Corrugation on Dynamic Vibration Characteristics of Urban Rail Vehicle Axle-box Bearings
YU Yaoxiang, GUO Liang, CHEN Zaigang, GAO Hongli, ZHANG Guoli
2025, 61 (23): 87-95. doi:
10.3901/JME.2025.23.087
Abstract
(
66
)
PDF
(78294KB) (
59
)
Three-dimensional Dynamic Modeling and Vibration Analysis of Deep Groove Ball Bearings under Multi-source Internal Fault Excitation
HU Jimin, LUO Yang, YU Yihao, SHI Juanjuan, HUANG Weiguo, SHEN Changqing, ZHU Zhongkui
2025, 61 (23): 96-107. doi:
10.3901/JME.2025.23.096
Abstract
(
61
)
PDF
(46803KB) (
63
)
The FCSIgram-based Identification Method of Optimal Demodulation Frequency Band for Rolling Bearing
ZHENG Jinde, DING Wenhai, CHENG Jian, LI Jianghong, SANG Wei
2025, 61 (23): 108-119. doi:
10.3901/JME.2025.23.108
Abstract
(
63
)
PDF
(114580KB) (
79
)
Parameter Feasible Region Analysis of Improved Suspension System for High Temperature Superconducting Flux Pinning Suspension Train
ZHANG Mingliang, DUAN Jiaqi, YANG Xinmeng, LIU Pengfei, ZHANG Lianpeng
2025, 61 (23): 120-133. doi:
10.3901/JME.2025.23.120
Abstract
(
40
)
PDF
(210077KB) (
11
)
Experimental and Numerical Simulation Research on the Nonlinear Coupled Longitudinal-torsional Vibration of a Drill-string
XIE Dou, WU Qinyao, SHE Lunyuan, ZOU Min, WANG Changcheng, LI Weicheng
2025, 61 (23): 134-144. doi:
10.3901/JME.2025.23.134
Abstract
(
47
)
PDF
(66713KB) (
27
)
Design and Modeling of Self-sensing Micro-vibration Isolator Based on Electret Transducer
JIANG Shuai, ZHU Duo, GUO Zhenkun
2025, 61 (23): 145-155. doi:
10.3901/JME.2025.23.145
Abstract
(
38
)
PDF
(86177KB) (
29
)
Generalized Zero-shot Fault Diagnosis for Rolling Bearing Based on Contrastive Embedding Feature Generation under Missing Data Condition
DONG Shaojiang, XIA Zongyou, ZOU Song, ZHAO Xingxin, LEI Kaiyin
2025, 61 (23): 156-169. doi:
10.3901/JME.2025.23.156
Abstract
(
53
)
PDF
(63046KB) (
27
)
Vibration Suppression of Space Flexible Structures Embedded with Parallel Piezoelectric Actuators
CHENG Ming, FU Jun, ZHU Dongfang, SUN Jun
2025, 61 (23): 170-181. doi:
10.3901/JME.2025.23.170
Abstract
(
54
)
PDF
(101787KB) (
86
)
Characteristic Analysis of Gas Turbine Blade Conditions and Casing Vibrations for Fault Early Warning
XIAO Yuan, FENG Kun, ZHANG Peng
2025, 61 (23): 182-192. doi:
10.3901/JME.2025.23.182
Abstract
(
56
)
PDF
(86739KB) (
114
)
Static and Dynamic Muti-objective Topology Optimization of 3D Thin-walled Infill Structures Towards to Complex Design Domains
LI Siqi, LIU Kang, CHEN Yiming, CAI Jiale, BAI Yingchun
2025, 61 (23): 193-202. doi:
10.3901/JME.2025.23.193
Abstract
(
66
)
PDF
(74693KB) (
73
)
Short-time Pulse Based Electromagnetic Variable Blank Holding for High Efficiency Forming and Analysis of Energy Characteristics
LI Lei, HU Guozeng, XUAN Dengshi, HUANG Haihong
2025, 61 (23): 203-216. doi:
10.3901/JME.2025.23.203
Abstract
(
53
)
PDF
(95557KB) (
26
)
Research Status and Prospects of In-space Additive Manufacturing
ZHENG Yang, ZHAO Cenya, XIONG Ruize, NIU Wei, CHENG Fang, LIU Wei, ZANG Libin
2025, 61 (23): 217-239. doi:
10.3901/JME.2025.23.217
Abstract
(
140
)
PDF
(274158KB) (
403
)
Study on Hybrid Femtosecond Laser Layered Micro-hole Drilling Technique via Applying External Voltage Based on Ring Feeding
WANG Houxiao, LI Rui, DAI Xinmin, XIA Kaibo
2025, 61 (23): 240-249. doi:
10.3901/JME.2025.23.240
Abstract
(
40
)
PDF
(114851KB) (
29
)
Study of Microwave-assisted Hot Embossing of PMMA-based Microstructure Arrays
LUO Hong, BIN Xiang, YU Jianwu, QIAN Jun
2025, 61 (23): 250-258. doi:
10.3901/JME.2025.23.250
Abstract
(
35
)
PDF
(99061KB) (
20
)
Research on Microstructure Evolution of High-strength Steel Components in Multi-arc Additive Manufacturing
HE Tianying, YU Shengfu, ZHOU Jie, XIAO Yu
2025, 61 (23): 259-269. doi:
10.3901/JME.2025.23.259
Abstract
(
36
)
PDF
(207803KB) (
65
)
3D Printing Construction of Surface Microstructures of Dielectric Layers and Performance Study of Triboelectric Nanogenerator
YANG Leipeng, WANG Yilei, WANG Kaizheng, PAN Baisong, XIAO Yuan
2025, 61 (23): 270-279. doi:
10.3901/JME.2025.23.270
Abstract
(
35
)
PDF
(106539KB) (
9
)
Research on Contact Fractal Model of Rough Surfaces with Hard Coatings
LIAN Yizhang, ZHANG Xueliang, LIAO Shanjun
2025, 61 (23): 280-291. doi:
10.3901/JME.2025.23.280
Abstract
(
60
)
PDF
(32107KB) (
24
)
Thickness Measurement of Functional Coatings on the Surface of Structural Parts: Key Technology and Advancements
WU Tiange, GUO Guoqiang, WU Lili, KE Shuai, KONG Zhixue, ZHAO Huan, WANG Dazhong
2025, 61 (23): 292-307. doi:
10.3901/JME.2025.23.292
Abstract
(
81
)
PDF
(123820KB) (
172
)
Spatial Stiffness Identification and Pose Optimization Analysis of Robotic Milling Process Considering Bidirectional Weak-stiffnesses Characteristic
GU Qunfei, LIU Shun, JIN Sun
2025, 61 (23): 308-320. doi:
10.3901/JME.2025.23.308
Abstract
(
72
)
PDF
(133989KB) (
72
)
Effect of Ferrocene Content on the Properties of SLS-CVR Formed SiC
nw
/SiC Absorbing Ceramics
FANG Zhiqiang, ZHANG Yangze, WU Jiamin, MAO Chen, CHEN Ying
2025, 61 (23): 321-330. doi:
10.3901/JME.2025.23.321
Abstract
(
37
)
PDF
(96584KB) (
12
)
Study on Failure Mechanism of Intralaminar Hybrid Carbon/Glass Fiber Braided Composite Pipes under Pressurized Impact
SHI Lin, YANG Hua, WU Zhenyu, ZHAO Lei, PENG Laihu, NI Qingqing
2025, 61 (23): 331-343. doi:
10.3901/JME.2025.23.331
Abstract
(
35
)
PDF
(183959KB) (
11
)
Process Optimization and Wear Mechanism of Ultrasonic-assisted Milling of Titanium Alloy Based on PVD-coated Tools
LU Yanjun, YE Yonghui, GUAN Weifeng, CHEN Yuhan, ZHU Xueming, WU Yongbo
2025, 61 (23): 344-360. doi:
10.3901/JME.2025.23.344
Abstract
(
46
)
PDF
(127773KB) (
65
)
Prediction and Control Method for Deformation of Aeronautical Monolithic Components in Multi Process Processing
QIN Guohua, WANG Jiguo, LIN Feng, WU Zhuxi
2025, 61 (23): 361-372. doi:
10.3901/JME.2025.23.361
Abstract
(
47
)
PDF
(38560KB) (
54
)
Surface Roughness Prediction Methods for Precision Mill Roll Cylindrical Grinding
ZHAO Yang, WANG Zhongren, SHI Teilin, TAN Meng, ZHANG Wen, LI Wenxi
2025, 61 (23): 373-380. doi:
10.3901/JME.2025.23.373
Abstract
(
57
)
PDF
(20437KB) (
43
)
Study on Heat Flux Distribution and Heat Transfer Mechanism Considering Wheel-workpiece Contact Geometry in Vertical-spindle Surface Grinding
GAO Binhua, JIN Tan, XIE Guizhi, QU Meina
2025, 61 (23): 381-394. doi:
10.3901/JME.2025.23.381
Abstract
(
59
)
PDF
(113106KB) (
47
)
Office Online
Author Login
Peer Review
Office Work
Journal
Current Issue
Archive
Most Read
Most Download
Most Cited
Email Alert
RSS
Copyright © Journal of Mechanical Engineering |
京ICP备05055788号-30
