Journal of Mechanical Engineering

2018, Volume 54 Issue 3 Publication:05 February 2018
Previous Issue Next Issue
Influence of Vertical Loads on Quasi-constant Rotational Stiffness of The Cross-spring Flexure Pivot
LI Yongzhen, BI Shusheng, ZHAO Hongzhe, YANG Qizi, ZHANG Shuqing
机械工程学报. 2018, 54 (3): 1-7. doi: 10.3901/JME.2018.03.001
Abstract ( 1343 )    PDF(3634KB) ( 822 )
References | Related Articles | Metrics
Variable Frequency Drive and Transmission System of the Heavy Armoured Face Conveyor
LI Yang, HE Baiyan, YUAN Pengfei, NIE Rui, LI Guoping
机械工程学报. 2018, 54 (3): 8-17. doi: 10.3901/JME.2018.03.008
Abstract ( 1049 )    PDF(1430KB) ( 537 )
References | Related Articles | Metrics
Tip-following Path Planning and Its Performance Analysis for Hyper-redundant Manipulators
WANG Jungang, TANG Lei, GU Guoying, ZHU Xiangyang
机械工程学报. 2018, 54 (3): 18-25. doi: 10.3901/JME.2018.03.018
Abstract ( 1242 )    PDF(1298KB) ( 1087 )
References | Related Articles | Metrics
Task-orientated Design Method of Practical Constraint Metamorphic Mechanisms

LI Shujun, WANG Hongguang, LI Xiaopeng, YANG Hexu, DAI Jiansheng
Journal of Mechanical Engineering. 2018, 54 (3): 26-35. doi: 10.3901/JME.2018.03.026
Abstract ( 1119 )    PDF(2016KB) ( 708 )
References | Related Articles | Metrics
Kinematic and Performance Analysis of a 4-DOF 2PPPaR Parallel Manipulator
WU Cuncun, YANG Guilin, CHEN Chinyin, ZHANG Chi, LIU Shulin
机械工程学报. 2018, 54 (3): 36-45. doi: 10.3901/JME.2018.03.036
Abstract ( 1256 )    PDF(3011KB) ( 878 )
References | Related Articles | Metrics
Kinematics and Dexterity Analysis of the Human-machine Compatible Exoskeleton Mechanism for Shoulder Joint Rehabilitation
LI Jianfeng, LIU Junhui, ZHANG Leiyu, TAO Chunjing, JI Run, ZHAO Pengbo
机械工程学报. 2018, 54 (3): 46-54. doi: 10.3901/JME.2018.03.046
Abstract ( 862 )    PDF(2053KB) ( 917 )
References | Related Articles | Metrics
Design and Analysis of a Active-passive Variable Stiffness Flexible Joint
SHI Yanlei, ZHANG Xiaojun, ZHANG Minglu
机械工程学报. 2018, 54 (3): 55-62. doi: 10.3901/JME.2018.03.055
Abstract ( 1194 )    PDF(2902KB) ( 1090 )
References | Related Articles | Metrics
A Study on Microstructure and Tribology Performance of Samples Processed by Selective Laser Melting (SLM)
CHEN Xubin, GE Xiang, ZHU Yi, YANG Huayong
机械工程学报. 2018, 54 (3): 63-72. doi: 10.3901/JME.2018.03.063
Abstract ( 757 )    PDF(15623KB) ( 937 )
References | Related Articles | Metrics
Research on Time-varying Friction Characteristics of Gear Tooth Surface Based on Twin-disc Setup
LI Zhi, CHEN Jian, SHEN Jinlong, LIU Kun
机械工程学报. 2018, 54 (3): 73-81. doi: 10.3901/JME.2018.03.073
Abstract ( 658 )    PDF(1766KB) ( 678 )
References | Related Articles | Metrics
Molecular Dynamics Simulation for Continuous Dry Friction on Fretting Interfaces
PAN Shuaihang, YIN Nian, ZHANG Zhinan
机械工程学报. 2018, 54 (3): 82-87. doi: 10.3901/JME.2018.03.082
Abstract ( 892 )    PDF(5164KB) ( 629 )
References | Related Articles | Metrics
Study on Stress and Tribology of Micro Contact Surface in Seawater
ZHOU Jie, WU Jinjun, YU Gegang, YANG Yousheng, DUAN Haitao, YI Meng
机械工程学报. 2018, 54 (3): 88-94. doi: 10.3901/JME.2018.03.088
Abstract ( 753 )    PDF(3763KB) ( 555 )
References | Related Articles | Metrics
Analysis of Lubrication Characteristic of Single Droplet in the Elastohydrodynamic Lubrication Contact
LI Shuyi, GUO Feng, LI Xinming
机械工程学报. 2018, 54 (3): 95-100. doi: 10.3901/JME.2018.03.095
Abstract ( 784 )    PDF(2799KB) ( 481 )
References | Related Articles | Metrics
Study on the Magnetic Friction Characteristics of Magnetorheological Elastomers
LI Rui, REN Dejun, WU Xuan, LIU Lin, WANG Xiaojie
机械工程学报. 2018, 54 (3): 101-107. doi: 10.3901/JME.2018.03.101
Abstract ( 833 )    PDF(3544KB) ( 737 )
References | Related Articles | Metrics
A Corner Rounding and Trajectory Generation Algorithm for Five-axisLinear Toolpath
ZHAO Huan, ZHANG Yonghong, DING Han
机械工程学报. 2018, 54 (3): 108-116. doi: 10.3901/JME.2018.03.108
Abstract ( 1049 )    PDF(1542KB) ( 612 )
References | Related Articles | Metrics
Tool Selection of Multi-axis Machining for Channel Parts with Sculptured Surface
WU Baohai, LIANG Mancang, ZHANG Ying, LUO Ming
机械工程学报. 2018, 54 (3): 117-124. doi: 10.3901/JME.2018.03.117
Abstract ( 819 )    PDF(4137KB) ( 506 )
References | Related Articles | Metrics
Modeling and Optimizing for Multi-objective Partial Disassembly Line Balancing Problem
LI Liuke, ZHANG Zeqiang, ZHU Lixia, ZOU Binsen
机械工程学报. 2018, 54 (3): 125-136. doi: 10.3901/JME.2018.03.125
Abstract ( 883 )    PDF(749KB) ( 1348 )
References | Related Articles | Metrics
Research on Boundary Features Extraction and Reconstruction for Tire Tread Patterns
DONG Yude, ZHANG Rongtuan, SONG Zhonghui, FANG Yuqiang, BAI Sucheng, ZHANG Fangliang
机械工程学报. 2018, 54 (3): 137-147. doi: 10.3901/JME.2018.03.137
Abstract ( 787 )    PDF(14519KB) ( 715 )
References | Related Articles | Metrics
Research on Single-machine Inverse Scheduling Methods with Due-dates Based on Variable Neighborhood Search Hybrid Algorithm
MOU Jianhui, PAN Quanke, MOU Jiancai, XU Rufeng, YU Shanshan
机械工程学报. 2018, 54 (3): 148-159. doi: 10.3901/JME.2018.03.148
Abstract ( 793 )    PDF(1383KB) ( 471 )
References | Related Articles | Metrics
The Measure and Search Method of Process Knowledge Element Based on Machining Intent
CHANG Zhiyong, TAO Lizun, LI Jiajia, XI Zengfei
机械工程学报. 2018, 54 (3): 160-168. doi: 10.3901/JME.2018.03.160
Abstract ( 944 )    PDF(1804KB) ( 885 )
References | Related Articles | Metrics
Investigation of Oil Droplet Coverage Rate and Droplet Size Distribution under Minimum Quantity Lubrication Condition
ZHANG Song, ZHANG Chengliang, SHI Wenhao, LÜ Ying, CHEN Jie
机械工程学报. 2018, 54 (3): 169-177. doi: 10.3901/JME.2018.03.169
Abstract ( 510 )    PDF(4261KB) ( 575 )
References | Related Articles | Metrics
Optimization Method for Rotation Angle of the Non Modal Rotary Shaft
TANG Qingchun, YIN Shaohui, WANG Yongqiang, ZHANG Jian
机械工程学报. 2018, 54 (3): 178-185. doi: 10.3901/JME.2018.03.178
Abstract ( 609 )    PDF(8915KB) ( 446 )
References | Related Articles | Metrics
Measurement and Analysis of Cutting Force, Temperature and Cutting-induced Top-layer Damage in Edge Trimming of CFRPs
WANG Fuji, YIN Junwei, JIA Zhenyuan, MA Jianwei, XU Zhenyu, WANG Dong
机械工程学报. 2018, 54 (3): 186-195. doi: 10.3901/JME.2018.03.186
Abstract ( 835 )    PDF(12073KB) ( 900 )
References | Related Articles | Metrics
Experimental Study on Diamond Wheel V-tip Truing Using a Tangential Grinding Truing Method
LIANG Zhiqiang, WU Lifei, ZHOU Tianfeng, ZHANG Suyan, WANG Qiuyan, JIAO Li, WANG Xibin
机械工程学报. 2018, 54 (3): 196-202. doi: 10.3901/JME.2018.03.196
Abstract ( 776 )    PDF(9819KB) ( 692 )
References | Related Articles | Metrics
Analytical and Experimental Investigation of Temperature in Form Grinding
GUO Guoqiang, AN Qinglong, LIN Lifang, YANG Changqi, CHEN Ming
机械工程学报. 2018, 54 (3): 203-215. doi: 10.3901/JME.2018.03.203
Abstract ( 850 )    PDF(2820KB) ( 429 )
References | Related Articles | Metrics
Active Control of the Residual stress in Inconel718 Grinding Assisted by the Strengthen Induction Heating
LI Feng, LI Xuekun, RONG Yiming
机械工程学报. 2018, 54 (3): 216-226. doi: 10.3901/JME.2018.03.216
Abstract ( 720 )    PDF(2017KB) ( 586 )
References | Related Articles | Metrics
Construction and Analysis of Grinding Force Model of 20CrMnTi Steel Tooth Surface
TIAN Xinli, WANG Long, LIU Qian, TANG Xiujian, YANG Lijun, YANG Xuqi
机械工程学报. 2018, 54 (3): 227-232. doi: 10.3901/JME.2018.03.227
Abstract ( 885 )    PDF(12366KB) ( 788 )
References | Related Articles | Metrics