Journal of Mechanical Engineering

2018, Volume 54 Issue 2 Publication:20 January 2018
Previous Issue Next Issue
Progress in Numerical Simulation of Thermal Processes and Weld Pool Behaviors in Fusion Welding

WU Chuansong, MENG Xiangmeng, CHEN Ji, QIN Guoliang
Journal of Mechanical Engineering. 2018, 54 (2): 1-15. doi: 10.3901/JME.2018.02.001
Abstract ( 1184 )    PDF(983KB) ( 1413 )
References | Related Articles | Metrics
Current Situation and Prospects of Welding Arc Monitoring Technology
JIANG Fan, LI Yuanfeng, CHEN Shujun
机械工程学报. 2018, 54 (2): 16-26. doi: 10.3901/JME.2018.02.016
Abstract ( 835 )    PDF(480KB) ( 978 )
References | Related Articles | Metrics
Detection and Analysis of Weld Pool Dynamic Behavior and Welder Control Information in GTAW
FAN Ding, DUN Xiaochun, ZHANG Gang, SHI Yu
机械工程学报. 2018, 54 (2): 27-33. doi: 10.3901/JME.2018.02.027
Abstract ( 615 )    PDF(694KB) ( 588 )
References | Related Articles | Metrics
Electromagnetic Vibration Monitoring Method for Liquid Transfer Mode in Wire Feeding Based Laser Additive Manufacturing(WFLAM)
HUANG Anguo, LIU Bo, ZHENG Zengchao, GUO Jiaqi, CHEN Yiyuan, PANG Shengyong
机械工程学报. 2018, 54 (2): 34-40. doi: 10.3901/JME.2018.02.034
Abstract ( 783 )    PDF(425KB) ( 563 )
References | Related Articles | Metrics
Numerical Simulation of Keyhole TIG Welding of Dissimilar Steels Based on Asymmetric Heat Source
HUANG Yifei, LUO Zhen, AO Sansan, FAN Wenfei
机械工程学报. 2018, 54 (2): 41-47. doi: 10.3901/JME.2018.02.041
Abstract ( 831 )    PDF(457KB) ( 574 )
References | Related Articles | Metrics
Effect of Magnetic Field on the Weld Temperature Field and Flow Behavior of Molten Pool in Al/Steel CMT Welding Process
LIU Yibo, ZHANG Hongming, SUN Qingjie, LI Junzhao, FENG Jicai
机械工程学报. 2018, 54 (2): 48-54. doi: 10.3901/JME.2018.02.048
Abstract ( 777 )    PDF(503KB) ( 573 )
References | Related Articles | Metrics
Suppression Mechanism of Low Current Auxiliary TIG Arc on High Speed TIG-MIG Hybrid Welding and Process Optimization
CHEN Ji, WEI Jianhua, ZHOU Qian, WU Chuansong
机械工程学报. 2018, 54 (2): 55-61. doi: 10.3901/JME.2018.02.055
Abstract ( 677 )    PDF(515KB) ( 662 )
References | Related Articles | Metrics
Influence of the Crystal Orientation of Epitaxial Solidification on the Linear Instability Dynamic during the Solidification of Welding Pool
ZHENG Wenjian, HE Yanming, YANG Jianguo, DONG Zhibo
机械工程学报. 2018, 54 (2): 62-69. doi: 10.3901/JME.2018.02.062
Abstract ( 707 )    PDF(453KB) ( 598 )
References | Related Articles | Metrics
Study on the Dynamic Behavior of Molten Pool during the Stationary Pileup of the Double-electrode Micro Plasma Arc Welding
HUANG Jiankang, YANG Maohong, YU Shurong, SHI Yu, FAN Ding
机械工程学报. 2018, 54 (2): 70-76. doi: 10.3901/JME.2018.02.070
Abstract ( 595 )    PDF(514KB) ( 742 )
References | Related Articles | Metrics
Numerical Analysis of Welding Residual Stress in Laser+MIG Hybrid Butt Welding of Medium-thick Aluminum Alloy
XU Guoxiang, GUO Qinghu, HU Qingxian, ZHU Jie, LIU Peng, PAN Haichao
机械工程学报. 2018, 54 (2): 77-83. doi: 10.3901/JME.2018.02.077
Abstract ( 804 )    PDF(432KB) ( 594 )
References | Related Articles | Metrics
Study of the Influence of Longitudinal Static Magnetic Field on Surface Quality and Performances of Arc Welding Based Additive Forming Parts
ZHOU Xiangman, TIAN Qihua, DU Yixian, ZHANG Haiou, WANG Guilan, MEI Feixiang
机械工程学报. 2018, 54 (2): 84-92. doi: 10.3901/JME.2018.02.084
Abstract ( 667 )    PDF(749KB) ( 640 )
References | Related Articles | Metrics
Study on Controlling of Welding Seam Microstructure about Nickel-based High-temperature Alloy by Pulse TIG Welding Process
ZHANG Xiaohong, MA Pengzhao, ZHANG Kang, CHEN Jingqing, CHEN Hui
机械工程学报. 2018, 54 (2): 93-101. doi: 10.3901/JME.2018.02.093
Abstract ( 670 )    PDF(788KB) ( 642 )
References | Related Articles | Metrics
Finite Element Simulation of Welding Process Based on Reverse Engineering
ZHAO Wenyong, LIU Xiangbo, WU Haijiang, WEI Yanhong, ZHANG Tao, LI Zhuo
机械工程学报. 2018, 54 (2): 102-109. doi: 10.3901/JME.2018.02.102
Abstract ( 870 )    PDF(630KB) ( 651 )
References | Related Articles | Metrics
Friction Torque and Heat Input Characteristics During Continuous Drive Friction Welding of Aluminum to Steel
ZHANG Changqing, LIU Xiongbo, LÜ Guangming, RUI Zhiyuan, LI Jinglong
机械工程学报. 2018, 54 (2): 110-116. doi: 10.3901/JME.2018.02.110
Abstract ( 637 )    PDF(486KB) ( 669 )
References | Related Articles | Metrics
Effect of Sputtering Power on the Mechanical Properties of Ti Film Based on the Nano Indentation Method and Nano Impact Method
JIN Qiaoling, WANG Haidou, LI Guolu, ZHANG Jianjun, LIU Jinna
机械工程学报. 2018, 54 (2): 117-124. doi: 10.3901/JME.2018.02.117
Abstract ( 693 )    PDF(732KB) ( 679 )
References | Related Articles | Metrics
Analysis on Mechanical Properties of Stainless Steel Wire Mesh Reinforced Aluminum Composite Plate Fabricated by Cold Rolling
HUANG Huagui, WANG Jichao, LIU Wenwen, DU Fengshan
机械工程学报. 2018, 54 (2): 125-130,137. doi: 10.3901/JME.2018.02.125
Abstract ( 606 )    PDF(593KB) ( 437 )
References | Related Articles | Metrics
Research on Springback Mechanism and Control of Ultra High Strength Steel in Roll Forming Process
HAN Fei, NIU Lili, WANG Yun, YANG Yahui
机械工程学报. 2018, 54 (2): 131-137. doi: 10.3901/JME.2018.02.131
Abstract ( 726 )    PDF(478KB) ( 575 )
References | Related Articles | Metrics
Fault Diagnosis Based on Dual Kalman Filter of Clutch Brushless DC Actuator Motor for Dry Dual Clutch Transmission
ZHAO Zhiguo, LI Hangyu, LEI Dan
机械工程学报. 2018, 54 (2): 138-149. doi: 10.3901/JME.2018.02.138
Abstract ( 577 )    PDF(622KB) ( 496 )
References | Related Articles | Metrics
Multi-objective Optimization of Vehicle Dynamics Performance Based on Entropy Weighted TOPSIS Method
JIANG Rongchao, LIU Dawei, WANG Dengfeng
机械工程学报. 2018, 54 (2): 150-158. doi: 10.3901/JME.2018.02.150
Abstract ( 970 )    PDF(446KB) ( 1260 )
References | Related Articles | Metrics
Analytical Research of Yaw Damper Damping Matching for High-speed Train
YU Yuewei, ZHOU Changcheng, ZHAO Leilei
机械工程学报. 2018, 54 (2): 159-168. doi: 10.3901/JME.2018.02.159
Abstract ( 721 )    PDF(354KB) ( 490 )
References | Related Articles | Metrics
Lane Tracking of Driver Assistance System with Man-machine-coordination
LI Jin, LIU Yangyang, HU Jinfang
机械工程学报. 2018, 54 (2): 169-175. doi: 10.3901/JME.2018.02.169
Abstract ( 746 )    PDF(429KB) ( 684 )
References | Related Articles | Metrics
Study on Modal Aerodynamic Damping Analysis Method for Wind Turbine Blade
CHI Zhiqiang, XIA Hongjian, LI Deyuan, ZHANG Xiangwei
机械工程学报. 2018, 54 (2): 176-183. doi: 10.3901/JME.2018.02.176
Abstract ( 734 )    PDF(337KB) ( 337 )
References | Related Articles | Metrics
Design and Simulation of Variable Area Jet Nozzle with Asymmetrical Attitude Simulation
CHEN Pengfei, WU Feng, XU Quanyong, PENG Jin, XU Qiannan
机械工程学报. 2018, 54 (2): 184-190. doi: 10.3901/JME.2018.02.184
Abstract ( 607 )    PDF(478KB) ( 621 )
References | Related Articles | Metrics
Influence of Roof Shape on Micrositing of Rooftop Wind Turbine in the Building Group
HOU Yali, WANG Jianwen, WANG Qiang, WANG Xinting
机械工程学报. 2018, 54 (2): 191-200. doi: 10.3901/JME.2018.02.191
Abstract ( 753 )    PDF(585KB) ( 481 )
References | Related Articles | Metrics
Parametric Model of Vortex Generators of Wind Turbine Considering Inter-effect of Winglets
ZHAO Zhenzhou, YAN Chang, WANG Tongguang, SHEN Wenzhong, ZHENG Yuan, XU Bofeng
机械工程学报. 2018, 54 (2): 201-208. doi: 10.3901/JME.2018.02.201
Abstract ( 655 )    PDF(366KB) ( 573 )
References | Related Articles | Metrics
Experimental Investigation of the Instability of Cavitation in Veturi Tube under Different Cavitation Stage
LONG Xinping, WANG Jiong, ZUO Dan, ZHANG Junqiang, JI Bin
机械工程学报. 2018, 54 (2): 209-215. doi: 10.3901/JME.2018.02.209
Abstract ( 839 )    PDF(514KB) ( 747 )
References | Related Articles | Metrics
Sensitivity Analysis of Manufacturing Variability on High-pressure Compressor Performance
ZHENG Siyu, TENG Jinfang, QIANG Xiaoqing
机械工程学报. 2018, 54 (2): 216-224. doi: 10.3901/JME.2018.02.216
Abstract ( 771 )    PDF(702KB) ( 806 )
References | Related Articles | Metrics
Refraction Effect from Beam Refraction by Annular Wall Window in LDA Applications
LI Chunming, LI Jin, LI Shenlong, WEI Wei
机械工程学报. 2018, 54 (2): 225-232. doi: 10.3901/JME.2018.02.225
Abstract ( 549 )    PDF(512KB) ( 387 )
References | Related Articles | Metrics