Journal of Mechanical Engineering

2018, Volume 54 Issue 15 Publication:05 August 2018
Previous Issue Next Issue
Review of Biomimetic Mechanism, Actuation, Modeling and Control in Soft Manipulators
YAN Jihong, SHI Peipei, ZHANG Xinbin, ZHAO Jie
机械工程学报. 2018, 54 (15): 1-14. doi: 10.3901/JME.2018.15.001
Abstract ( 2218 )    PDF(721KB) ( 2808 )
Related Articles | Metrics
Efficient Iterative Closest Point Localisation Algorithm for Autonomous Robots
YANG Jingdong, SUN Leiming, SHAO Yujie, SHI Yanwei
机械工程学报. 2018, 54 (15): 15-20,30. doi: 10.3901/JME.2018.15.015
Abstract ( 911 )    PDF(563KB) ( 370 )
References | Related Articles | Metrics
Type Synthesis of Uncoupled Rotational Parallel Mechanisms with Two Degrees of Freedom
ZHANG Yanbin, JING Xianling, HAN Jianhai, GUO Bingjing, ZHAO Yifu
机械工程学报. 2018, 54 (15): 21-30. doi: 10.3901/JME.2018.15.021
Abstract ( 762 )    PDF(359KB) ( 462 )
References | Related Articles | Metrics
Active Control on Dynamic Loads of the Drum Shearer Cutting Transmission System Based on Active Disturbance Rejection Torque Compensation
GE Shuaishuai, QIN Datong, HU Minghui, LIU Yonggang
机械工程学报. 2018, 54 (15): 31-40. doi: 10.3901/JME.2018.15.031
Abstract ( 695 )    PDF(703KB) ( 428 )
References | Related Articles | Metrics
Design of Manipulator with Variable Performances Based on Metamorphic Mechanism
RONG Yu, QU Mengke
机械工程学报. 2018, 54 (15): 41-51,59. doi: 10.3901/JME.2018.15.041
Abstract ( 770 )    PDF(711KB) ( 542 )
References | Related Articles | Metrics
Extraction of the Geometric Parameters of Human Low Limbs Based on Kinematics Analysis of Mechanism
ZHANG Shutao, QIAN Jinwu, WANG Xiaoyi
机械工程学报. 2018, 54 (15): 52-59. doi: 10.3901/JME.2018.15.052
Abstract ( 887 )    PDF(373KB) ( 333 )
References | Related Articles | Metrics
Review of Vibration and Noise Control of the Plate Structures
SONG Yubao, WEN Jihong, YU Dianlong, SHEN Huijie
机械工程学报. 2018, 54 (15): 60-77. doi: 10.3901/JME.2018.15.060
Abstract ( 1403 )    PDF(542KB) ( 913 )
References | Related Articles | Metrics
Study on Wheel/Rail Impact Dynamics with Three Dimensional Wheel Flat Model
REN Zunsong
机械工程学报. 2018, 54 (15): 78-85. doi: 10.3901/JME.2018.15.078
Abstract ( 797 )    PDF(309KB) ( 413 )
References | Related Articles | Metrics
Study on the Transient Dynamic and Safety Analysis of Double Aircraft-towed Cables
HAN Zhiren, LIU Yong, LUO Zhiqing, HAN Xiyue, WU Jianghao, ZHOU Chao
机械工程学报. 2018, 54 (15): 86-91. doi: 10.3901/JME.2018.15.086
Abstract ( 788 )    PDF(444KB) ( 330 )
References | Related Articles | Metrics
Influence of Modulation Period on the Mechanical and Tribological Properties of Nano-multilayer Graphite-like Carbon Films
MA Guozheng, YONG Qingsong, WANG Haidou, HE Pengfei, XU Binshi
机械工程学报. 2018, 54 (15): 92-99. doi: 10.3901/JME.2018.15.092
Abstract ( 680 )    PDF(513KB) ( 277 )
References | Related Articles | Metrics
Effect of Piston Skirt Profile Parameter on Secondary Motion and Lubrication Performance of Piston
LÜ Yanjun, LI Meng, ZHANG Yongfang, LIU Wanwan, YAN Dong
机械工程学报. 2018, 54 (15): 100-116. doi: 10.3901/JME.2018.15.100
Abstract ( 642 )    PDF(1250KB) ( 414 )
References | Related Articles | Metrics
Hierarchical Contact Simulation for Elastic Asperity Based on Fractal Geometry Reconstruction and Lateral Contact Model
CHEN Ding, HOU Liang, GUO Tengpeng
机械工程学报. 2018, 54 (15): 117-124. doi: 10.3901/JME.2018.15.117
Abstract ( 745 )    PDF(573KB) ( 388 )
References | Related Articles | Metrics
Investigation on the Energy Dissipation Properties of Jointed Structure during Macro-slip Stage
LI Yikun, HAO Zhiming
机械工程学报. 2018, 54 (15): 125-131. doi: 10.3901/JME.2018.15.125
Abstract ( 597 )    PDF(378KB) ( 361 )
References | Related Articles | Metrics
Unstructured T-spline-based Isogeometric Analysis for Thin Shells
YUAN Pei, LIU Zhenyu, QIU Chan, TAN Jianrong
机械工程学报. 2018, 54 (15): 132-140. doi: 10.3901/JME.2018.15.132
Abstract ( 782 )    PDF(378KB) ( 338 )
References | Related Articles | Metrics
Method of Rigid Registration Based on Poisson Reconstruction of Local Sample Points
SUN Dianzhu, GUO Hongshuai, LI Yanrui, NIE Lekui
机械工程学报. 2018, 54 (15): 141-149. doi: 10.3901/JME.2018.15.141
Abstract ( 847 )    PDF(431KB) ( 324 )
References | Related Articles | Metrics
Nonlinear Information Dynamics Model of Synthetic Evaluation on Product Form Aesthetic
ZHOU Aimin, SU Jianning, YAN Shutian, OUYANG Jinyan, SHI Cheng, YUWANG Baiyun
机械工程学报. 2018, 54 (15): 150-159. doi: 10.3901/JME.2018.15.150
Abstract ( 774 )    PDF(396KB) ( 357 )
References | Related Articles | Metrics
Method of Automatic Branch-pipe Routing Based LTL-PRM Algorithm
MA Jiangtao, LIU Jianhua, XU Lianjie, WU Hongchao, XU Jinbao
机械工程学报. 2018, 54 (15): 160-170. doi: 10.3901/JME.2018.15.160
Abstract ( 727 )    PDF(493KB) ( 276 )
References | Related Articles | Metrics
Wear of One-shot Drill Bit in Drilling CFRP and Novel Method for Tool Wear Reduction

WANG Fuji, QIAN Baowei, CHENG De, JIA Zhenyuan, FU Rao, YIN Junwei
Journal of Mechanical Engineering. 2018, 54 (15): 171-179. doi: 10.3901/JME.2018.15.171
Abstract ( 733 )    PDF(774KB) ( 554 )
References | Related Articles | Metrics
Transient Thermal and Analytical Model of Whirling Process Based on Time-varying Heat Source in Machining Screw
HE Yan, LIU Chao, LI Yufeng, WANG Lexiang, WANG Yulin
机械工程学报. 2018, 54 (15): 180-190. doi: 10.3901/JME.2018.15.180
Abstract ( 546 )    PDF(386KB) ( 339 )
References | Related Articles | Metrics
Research on Modeling Method of Material Removal for Rail Grinding by Abrasive Belt Based on Elastic Hertzian Contact
FAN Wengang, LIU Yueming, WANG Wenxi, LI Jianyong, WANG Rongquan
机械工程学报. 2018, 54 (15): 191-198. doi: 10.3901/JME.2018.15.191
Abstract ( 624 )    PDF(417KB) ( 508 )
References | Related Articles | Metrics
Ellipsoid End Mill Design and Tool Path Generation Algorithm
LIU Xianli, FAN Mengchao, JI Wei, WANG Guangyue, ZHAO Zemin
机械工程学报. 2018, 54 (15): 199-212. doi: 10.3901/JME.2018.15.199
Abstract ( 678 )    PDF(1064KB) ( 489 )
References | Related Articles | Metrics
Tracing Algorithm of Workpiece Heat Flux in Deep Hole Processing
KONG Lingfei, SUN Lilun, LIU Yao, LI Xubo, GUO Weichao
机械工程学报. 2018, 54 (15): 213-220. doi: 10.3901/JME.2018.15.213
Abstract ( 634 )    PDF(322KB) ( 284 )
References | Related Articles | Metrics
Integrating Optimization of Cutter Diameter and Cutting Parameters for Energy-aware Multi-tool Hole Machining
CHEN Xingzheng, LI Congbo, WU Lei, WAN Teng, YANG Qingshan
机械工程学报. 2018, 54 (15): 221-231. doi: 10.3901/JME.2018.15.221
Abstract ( 707 )    PDF(371KB) ( 422 )
References | Related Articles | Metrics
Research on Surface Roughness of 304 Stainless Steel Cut by Cemented Carbide Micro Pit Tool
YUAN Sen, HE Lin, ZHAN Gang, JIANG Hongwan, ZOU Zhongfei
机械工程学报. 2018, 54 (15): 232-240. doi: 10.3901/JME.2018.15.232
Abstract ( 977 )    PDF(537KB) ( 411 )
References | Related Articles | Metrics