Journal of Mechanical Engineering

2018, Volume 54 Issue 13 Publication:05 July 2018
Previous Issue Next Issue
State-of-art of Metamaterials with Negative Poisson's Ratio

YU Jingjun, XIE Yan, PEI Xu
Journal of Mechanical Engineering. 2018, 54 (13): 1-14. doi: 10.3901/JME.2018.13.001
Abstract ( 1965 )    PDF(751KB) ( 1691 )
References | Related Articles | Metrics
Machines Which Can Think-Mechanical Intelligence (MI)
KANG Rongjie, YANG Chenghao, YANG Mingyuan, CHEN Yan
机械工程学报. 2018, 54 (13): 15-24. doi: 10.3901/JME.2018.13.015
Abstract ( 1747 )    PDF(520KB) ( 655 )
References | Related Articles | Metrics
Multi-backbone Continuum Mechanisms: Forms and Applications
XU Kai, LIU Huan
机械工程学报. 2018, 54 (13): 25-33. doi: 10.3901/JME.2018.13.025
Abstract ( 1239 )    PDF(620KB) ( 963 )
References | Related Articles | Metrics
Variable Stiffness Actuators: A Review of the Structural Research
BI Shusheng, LIU Chang, ZHOU Xiaodong, YU Jingjun
机械工程学报. 2018, 54 (13): 34-46. doi: 10.3901/JME.2018.13.034
Abstract ( 928 )    PDF(340KB) ( 624 )
References | Related Articles | Metrics
Topology Optimization of Multiple Materials Compliant Mechanisms Based on Sequence Interpolation Model and Multigrid Method
DU Yixian, LI Hanzhao, XIE Huanghai, TIAN Qihua, ZHOU Xiangman, LUO Zhen
机械工程学报. 2018, 54 (13): 47-56. doi: 10.3901/JME.2018.13.047
Abstract ( 828 )    PDF(455KB) ( 363 )
References | Related Articles | Metrics
Systematic Approach to the Design of Spatial Translational Compliant Parallel Mechanisms
LI Haiyang, HAO Guangbo, YU Jingjun, DENG Zilong, SONG Zengwang
机械工程学报. 2018, 54 (13): 57-65. doi: 10.3901/JME.2018.13.057
Abstract ( 918 )    PDF(670KB) ( 470 )
References | Related Articles | Metrics
Numerical Iterative Algorithm for Solving Kinematics and Dynamics of Under-actuated Mechanisms with Flexible Joints
ZHANG Jianjun, DU Chuncui, YANG Gaowei, LI Weimin
机械工程学报. 2018, 54 (13): 66-72. doi: 10.3901/JME.2018.13.066
Abstract ( 784 )    PDF(297KB) ( 274 )
References | Related Articles | Metrics
Static Modelling and Analysis of Cross-spring Flexure Pivots with Variable Cross-section
YANG Miao, DU Zhijiang, CHEN Yi, SUN Lining, DONG Wei
机械工程学报. 2018, 54 (13): 73-78. doi: 10.3901/JME.2018.13.073
Abstract ( 924 )    PDF(256KB) ( 492 )
References | Related Articles | Metrics
On the Design, Manufacturing and Experiment of a New Type Flexural Joint
YU Yueqing, LI Qingqing
机械工程学报. 2018, 54 (13): 79-85. doi: 10.3901/JME.2018.13.079
Abstract ( 953 )    PDF(399KB) ( 576 )
References | Related Articles | Metrics
Study of Zero Stiffness Flexural Pivot Based on Spring-crank Mechanism
BI Shusheng, YANG Qizi, LIU Lang, ZHAO Hongzhe
机械工程学报. 2018, 54 (13): 86-93. doi: 10.3901/JME.2018.13.086
Abstract ( 837 )    PDF(539KB) ( 478 )
References | Related Articles | Metrics
Design and Analysis of IST-LEJ Based on Tension Band Parameters
QIU Lifang, WANG Jinglin, LIU Ningning
机械工程学报. 2018, 54 (13): 94-101. doi: 10.3901/JME.2018.13.094
Abstract ( 724 )    PDF(403KB) ( 213 )
References | Related Articles | Metrics
Performance Comparison and Analysis of Three 2-DOF Compliant Precision Positioning Stages
WANG Nianfeng, ZHANG Zhiyuan, ZHANG Xianmin, LIANG Xiaohe
机械工程学报. 2018, 54 (13): 102-109. doi: 10.3901/JME.2018.13.102
Abstract ( 695 )    PDF(397KB) ( 339 )
References | Related Articles | Metrics
Modeling, Analysis and Experiments of a Three-dimensional Bridge-type Mechanism with Combined Flexure Hinges
CHEN Fangxin, GAO Futian, DU Zhijiang, SUN Lining, DONG Wei
机械工程学报. 2018, 54 (13): 110-116. doi: 10.3901/JME.2018.13.110
Abstract ( 780 )    PDF(390KB) ( 316 )
References | Related Articles | Metrics
Stiffness Analysis of a Novel Flexible Positioning Mechanism for Large-aperture Grating Tiling
SHAO Zhongxi, WU Shilei, FU Hongya
机械工程学报. 2018, 54 (13): 117-125. doi: 10.3901/JME.2018.13.117
Abstract ( 588 )    PDF(389KB) ( 225 )
References | Related Articles | Metrics
Design, Analysis and Experimental Study of a Cable-driven Parallel Waist Rehabilitation Robot
CHEN Qiao, ZI Bin, SUN Zhi, WANG Ning, LI Shuyi, LUO Xiaoqi
机械工程学报. 2018, 54 (13): 126-134. doi: 10.3901/JME.2018.13.126
Abstract ( 1163 )    PDF(635KB) ( 702 )
References | Related Articles | Metrics
Design and Analysis of Differential Cable-driven Stabilized Platform
LI Daquan, HONG Huajie, JIANG Xianliang, LIU Hua, HE Hanhui
机械工程学报. 2018, 54 (13): 135-141. doi: 10.3901/JME.2018.13.135
Abstract ( 994 )    PDF(422KB) ( 442 )
References | Related Articles | Metrics
Experimental Study on Friction-wear for Valve Plate with Bionic Non-smooth Surface of Hydraulic Motor
MA Hao, GAO Dianrong, WU Shaofeng, LIANG Yingna
机械工程学报. 2018, 54 (13): 142-152. doi: 10.3901/JME.2018.13.142
Abstract ( 669 )    PDF(814KB) ( 402 )
References | Related Articles | Metrics
Tribological Properties of 4 Types of Bearing Steel in Water Based Mud
XIAO Huaping, LIU Shuhai, CHEN Yu, WANG Deguo
机械工程学报. 2018, 54 (13): 153-158. doi: 10.3901/JME.2018.13.153
Abstract ( 510 )    PDF(358KB) ( 279 )
References | Related Articles | Metrics
Thermal Elastohydrodynamic Lubrication Analysis of Cylindrical Roller Bearing Considering Thermal Elastic Deformation and Surface Roughness
LU Zunyou, LÜ Yanjun, LI Sha, ZHANG Wei, DANG Chao, YU Na, YANG Jie
机械工程学报. 2018, 54 (13): 159-169. doi: 10.3901/JME.2018.13.159
Abstract ( 739 )    PDF(440KB) ( 361 )
References | Related Articles | Metrics
Selective Laser Melting and Subtractive Hybrid Manufacture AISI420 Stainless Steel: Evolution on Surface Roughness and Residual Stress
SONG Bo, ZHANG Yuanjie, ZHAO Xiao, ZHANG Lichao, WEI Qingsong, SHI Yusheng
机械工程学报. 2018, 54 (13): 170-178. doi: 10.3901/JME.2018.13.170
Abstract ( 883 )    PDF(650KB) ( 496 )
References | Related Articles | Metrics
Modeling and Analysis of Adaptive Weighted Variance Propagation Network in Hybrid Multistage Machining Processes
ZHENG Xiaoyun, YU Jianbo, LIU Haiqiang, CHENG Hui, SUN Xiwu, WU Hao
机械工程学报. 2018, 54 (13): 179-191. doi: 10.3901/JME.2018.13.179
Abstract ( 822 )    PDF(591KB) ( 277 )
References | Related Articles | Metrics
Constraint Characteristics and an Optimal Selection Method of Networked Collaborative Manufacturing Equipment
YIN Chao, ZHAO Xu, QIU Lei
机械工程学报. 2018, 54 (13): 192-201. doi: 10.3901/JME.2018.13.192
Abstract ( 822 )    PDF(480KB) ( 247 )
References | Related Articles | Metrics
Process and Failure Behaviors of Self-piercing Riveting in Titanium Alloy Sheets
ZHANG Xianlian, HE Xiaocong, ZHAO Lun, XING Baoying
机械工程学报. 2018, 54 (13): 202-207. doi: 10.3901/JME.2018.13.202
Abstract ( 818 )    PDF(472KB) ( 421 )
References | Related Articles | Metrics
Theoretical Analysis and Experimental Study on Material Removal Per Length of Wire in the Cutting of Multi-wire Saw with Reciprocating
LIN Zhishu, HUANG Hui, ZHENG Shenglong
机械工程学报. 2018, 54 (13): 208-214. doi: 10.3901/JME.2018.13.208
Abstract ( 654 )    PDF(336KB) ( 299 )
References | Related Articles | Metrics
Spraying Method and Optimization of Process Parameters for Remanufacturing Profiled Workpieces Based on Coating Model
XIA Xuhui, YANG Yi, WANG Lei, CAO Jianhua, LIU Xiang
机械工程学报. 2018, 54 (13): 215-224. doi: 10.3901/JME.2018.13.215
Abstract ( 654 )    PDF(385KB) ( 501 )
References | Related Articles | Metrics
Experimental Research of Dressing Amount Control and Quality Evaluation on Monolayer Abrasive Grinding Wheel
FENG Keming, SHI Chaoyu, ZHU Jianhui, ZHAO Jinzhui
机械工程学报. 2018, 54 (13): 225-232. doi: 10.3901/JME.2018.13.225
Abstract ( 622 )    PDF(478KB) ( 269 )
References | Related Articles | Metrics