Journal of Mechanical Engineering

2017, Volume 53 Issue 23 Publication:05 December 2017
Previous Issue Next Issue
Electromagnetic-excitation-based Identification Method for Identical Rotor-bearings System Parameters

LI Qihang, WANG Weimin, LIU Binbin, GAO Jinji
Journal of Mechanical Engineering. 2017, 53 (23): 1-6. doi: 10.3901/JME.2017.23.001
Abstract ( 847 )    PDF(1262KB) ( 489 )
References | Related Articles | Metrics
Applicability Analysis of Steady-state Models for Spiral Groove Gas Face Seals
HU Songtao, HUANG Weifeng, LIU Xiangfeng, WANG Yuming
机械工程学报. 2017, 53 (23): 7-13. doi: 10.3901/JME.2017.23.007
Abstract ( 878 )    PDF(712KB) ( 340 )
References | Related Articles | Metrics
Determining Method of Distorted Scaling Laws of the Thin Walled Annular Plates' Structures
LUO Zhong, WANG You, HAN Qingkai, JIANG Zhinong
机械工程学报. 2017, 53 (23): 14-19. doi: 10.3901/JME.2017.23.014
Abstract ( 621 )    PDF(450KB) ( 363 )
References | Related Articles | Metrics
Critical Load Failure Phenomenon and Mechanism of Integrally Geared Compressor
ZHANG Ming, JIANG Zhinong, ZHU Jun, GAO Jinji
机械工程学报. 2017, 53 (23): 20-25. doi: 10.3901/JME.2017.23.020
Abstract ( 692 )    PDF(1306KB) ( 495 )
References | Related Articles | Metrics
Dynnamic Performance of Reciprocating Compressor with Capacity Stepless Regulation System
LIU Guangbin, TANG Bin, ZHAO Yuanyang, LI Liansheng
机械工程学报. 2017, 53 (23): 26-31. doi: 10.3901/JME.2017.23.026
Abstract ( 779 )    PDF(1319KB) ( 296 )
References | Related Articles | Metrics
Multi-dimensional Fault Diagnosis Method Based on Expert Thinking
MA Bo, GAO Jinji, JIANG Zhinong
机械工程学报. 2017, 53 (23): 32-38. doi: 10.3901/JME.2017.23.032
Abstract ( 838 )    PDF(628KB) ( 473 )
References | Related Articles | Metrics
Nonlinear Dynamics of the Gear System in Five Shaft Integrally Geared Centrifugal Compressor
REN Hongjun, ZHANG Hao, YU Xiaoguang, SUN Wei
机械工程学报. 2017, 53 (23): 39-45. doi: 10.3901/JME.2017.23.039
Abstract ( 811 )    PDF(589KB) ( 293 )
References | Related Articles | Metrics
Reciprocating Compressor Fault Diagnosis Technology Based on Multi-source Information Fusion
ZHANG Ming, JIANG Zhinong
机械工程学报. 2017, 53 (23): 46-52. doi: 10.3901/JME.2017.23.046
Abstract ( 838 )    PDF(746KB) ( 534 )
References | Related Articles | Metrics
Measuring Principle and Calibration Experiment of the Overloaded Self-calibration Parallel Four-dimensional Force Measuring Platform
ZHAO Yanzhi, ZHAO Tieshi, CAO Hucheng, JIAO Leihao, ZHANG Xiaohui, CHEN Guanyu
机械工程学报. 2017, 53 (23): 53-61. doi: 10.3901/JME.2017.23.053
Abstract ( 722 )    PDF(2395KB) ( 307 )
References | Related Articles | Metrics
The Theory of Basic Tensegrity Unit Stable Forming
LUO Ani, LIU Heping, SKELTON R E, CHE Shijun
机械工程学报. 2017, 53 (23): 62-73. doi: 10.3901/JME.2017.23.062
Abstract ( 594 )    PDF(1780KB) ( 346 )
References | Related Articles | Metrics
Type Synthesis of 2R1T Symmetrical Parallel Mechanism with Continuous Rotation Axes
LI Shihua, TIAN Zhili, WANG Ziyi, HAN Xueyan
机械工程学报. 2017, 53 (23): 74-82. doi: 10.3901/JME.2017.23.074
Abstract ( 603 )    PDF(679KB) ( 370 )
References | Related Articles | Metrics
Design of A New Type of Mechanical Controllable Soft Start Transmission
JIANG Chengcan, RUI Yannian
机械工程学报. 2017, 53 (23): 83-91. doi: 10.3901/JME.2017.23.083
Abstract ( 646 )    PDF(1924KB) ( 261 )
References | Related Articles | Metrics
Multi-energy Domain Dynamic Full Solution Model and Experiment for the 4-DOF Hybrid Robot
LI Yongquan, SHAN Zhangbing, WANG Lijie, ZHANG Lijie
机械工程学报. 2017, 53 (23): 92-100. doi: 10.3901/JME.2017.23.092
Abstract ( 696 )    PDF(996KB) ( 341 )
References | Related Articles | Metrics
Design and Research of Variable Speed Device Based on Spiral Noncircular Gear
SONG Hongzhou, ZHENG Jigui, SHI Wei, LIU Wei, YAO Ran
机械工程学报. 2017, 53 (23): 101-107. doi: 10.3901/JME.2017.23.101
Abstract ( 650 )    PDF(4238KB) ( 440 )
References | Related Articles | Metrics
Study on Static Thermo-hydrodynamic Lubrication of Floating Ring Bearing
PEI Shiyuan, XU Hua, SHI Fanghui
机械工程学报. 2017, 53 (23): 108-115. doi: 10.3901/JME.2017.23.108
Abstract ( 962 )    PDF(838KB) ( 338 )
References | Related Articles | Metrics
Feasible Domain Adjustment Topology Optimization Designs of Structures under Stochastic Loads
SHI Jun, RONG Jianhua, YU Liaohong, TANG Chengtie, ZHAO Zhijun
机械工程学报. 2017, 53 (23): 116-128. doi: 10.3901/JME.2017.23.116
Abstract ( 625 )    PDF(963KB) ( 357 )
References | Related Articles | Metrics
The Temperature Prediction Mode of High Speed and High Precision Motorized Spindle
ZHANG Lixiu, LI Chaoqun, LI Jinpeng, ZHANG Ke, WU Yuhou
机械工程学报. 2017, 53 (23): 129-136. doi: 10.3901/JME.2017.23.129
Abstract ( 1003 )    PDF(2872KB) ( 388 )
References | Related Articles | Metrics
Evaluation Index Framework of Optimal Matching Position for Large Components Automatic Assembly
WANG Hao, CHEN Genliang, HUANG Shunzhou, CHEN Kunyong
机械工程学报. 2017, 53 (23): 137-146. doi: 10.3901/JME.2017.23.137
Abstract ( 641 )    PDF(1357KB) ( 350 )
References | Related Articles | Metrics
Innovative Design of Regular Unit-cell and Energy-absorbing Features under Impact of Polyhedron Sandwich Structure
LIU Jiatian, FENG Yixiong, ZHENG Hao, TAN Jianrong
机械工程学报. 2017, 53 (23): 147-156. doi: 10.3901/JME.2017.23.147
Abstract ( 656 )    PDF(1763KB) ( 316 )
References | Related Articles | Metrics
Finite Element Modeling on Appearance of Local Hot Bandings of Composite Sealing Ring and Relevant Influence Factors
GONG Ran, CHE Huajun, ZHANG He, XU Yi
机械工程学报. 2017, 53 (23): 157-164. doi: 10.3901/JME.2017.23.157
Abstract ( 616 )    PDF(1039KB) ( 254 )
References | Related Articles | Metrics
Design of a 4-DOF Piezoelectric Micro-gripper
CUI Yuguo, WANG Zibin, MA Jianqiang, ZHENG Junhui, WU Liangen
机械工程学报. 2017, 53 (23): 165-173. doi: 10.3901/JME.2017.23.165
Abstract ( 630 )    PDF(12511KB) ( 288 )
References | Related Articles | Metrics
Research on Wire Net Reliability Assessing Method in Multi-wire Sawing
LI Zhen, WANG Minjie, CAI Yujun, LI Guohe, PAN Xin
机械工程学报. 2017, 53 (23): 174-181. doi: 10.3901/JME.2017.23.174
Abstract ( 552 )    PDF(575KB) ( 273 )
References | Related Articles | Metrics
Continuous Generating Grinding Tooth Surface Texture Improvement Method for Noise Reduction
LI Guolong, LIU Pengxiang, ZHOU Hongqu, ZHONG Jintong
机械工程学报. 2017, 53 (23): 182-189. doi: 10.3901/JME.2017.23.182
Abstract ( 636 )    PDF(1552KB) ( 325 )
References | Related Articles | Metrics
Precision Grinding and Micro Hot Embossing of the Microgroove Lens Array for Light Transmitting and Uniforming
HU Manfeng, XIE Jin, LIU Jinan, SI Xianhai
机械工程学报. 2017, 53 (23): 190-196. doi: 10.3901/JME.2017.12.190
Abstract ( 527 )    PDF(3491KB) ( 294 )
References | Related Articles | Metrics
Simulation and Experimental Study of Ball-end Milling Surface Topography Based on an Improved Z-MAP Algorithm
DONG Yongheng, LI Shujuan, LI Yan, LI Pengyang, YANG Zhenchao
机械工程学报. 2017, 53 (23): 197-208. doi: 10.3901/JME.2017.23.197
Abstract ( 763 )    PDF(16054KB) ( 311 )
References | Related Articles | Metrics