Journal of Mechanical Engineering

2017, Volume 53 Issue 21 Publication:05 November 2017
Previous Issue Next Issue
Topology Matrix Method for Gait Generation of Wheel-legged Robots

GUO Weizhong, TANG Yun, GAO Feng
Journal of Mechanical Engineering. 2017, 53 (21): 1-8. doi: 10.3901/JME.2017.21.001
Abstract ( 895 )    PDF(1702KB) ( 647 )
References | Related Articles | Metrics
Safety Protection of Motor Driver in Nuclear Rescue Robot
LUAN Weiling, HAN Yanlong, ZHANG Xiaoni, JIANG Yifeng
机械工程学报. 2017, 53 (21): 9-15. doi: 10.3901/JME.2017.21.009
Abstract ( 625 )    PDF(1037KB) ( 587 )
References | Related Articles | Metrics
Efficient Flooding Strategy in Wireless Sensor Networks with Mobile Robots
WU Shaobo, CHOU Wusheng, NIU Jianwei
机械工程学报. 2017, 53 (21): 16-23. doi: 10.3901/JME.2017.21.016
Abstract ( 683 )    PDF(463KB) ( 315 )
References | Related Articles | Metrics
Development of Super 100 Mrad Radiation Durable Motor and Study of Radiation Resistance Properties for Related Materials
ZHANG Dongge, LIU Yaohua, LIN Yu, WU Guozhang, ZHANG Yan, LUAN Weili
机械工程学报. 2017, 53 (21): 24-30. doi: 10.3901/JME.2017.21.024
Abstract ( 664 )    PDF(3769KB) ( 342 )
References | Related Articles | Metrics
Design and Characterization of Shielding Materials for Electronics of Nuclear Robot
LI Zuosheng, ZHANG Yan, LIU Yujian, FANG Jun, LUAN Weiling, WU Guozhang
机械工程学报. 2017, 53 (21): 31-36. doi: 10.3901/JME.2017.21.031
Abstract ( 672 )    PDF(1698KB) ( 406 )
References | Related Articles | Metrics
Vibration Damping Characteristics of Dry Friction Damping Ring of High Speed Large Power Density Gear Transmission
FENG Haisheng, WANG Liqin, PENG Bo, ZHAO Xiaoli, ZHENG Dezhi
机械工程学报. 2017, 53 (21): 37-45. doi: 10.3901/JME.2017.21.037
Abstract ( 865 )    PDF(2264KB) ( 331 )
References | Related Articles | Metrics
Dynamics Analysis of a Symmetrical 2R1T 3-UPU Parallel Mechanism
CHEN Ziming, LIU Xiaomeng, ZHANG Yang, HUANG Kun, HUANG Zhen
机械工程学报. 2017, 53 (21): 46-53. doi: 10.3901/JME.2017.21.046
Abstract ( 1095 )    PDF(458KB) ( 649 )
References | Related Articles | Metrics
Topological Structural Synthesis of 3T-1R Parallel Mechanism Based on POC Equations
YANG Tingli, LIU Anxin, SHEN Huiping, HANG Lubin
机械工程学报. 2017, 53 (21): 54-64. doi: 10.3901/JME.2017.21.054
Abstract ( 491 )    PDF(677KB) ( 387 )
References | Related Articles | Metrics
Dynamic Modeling and Elastic Vibration Scale Effect of 2F2R Macro Micro Manipulator
GAO Sheng, LI Meijie, YANG Mingyan, ZHANG Piaoshi, REN Fushen
机械工程学报. 2017, 53 (21): 65-78. doi: 10.3901/JME.2017.21.065
Abstract ( 579 )    PDF(933KB) ( 343 )
References | Related Articles | Metrics
Spiral Groove Gas Face Seal Transient Response Analysis Based on Proper Orthogonal Decomposition Method
YIN Yuan, HUANG Weifeng, LIU Xiangfeng, HU Songtao, LIU Ying
机械工程学报. 2017, 53 (21): 79-85. doi: 10.3901/JME.2017.21.079
Abstract ( 675 )    PDF(2597KB) ( 442 )
References | Related Articles | Metrics
Adhesion and Friction Properties of Plant Surfaces with Typical Architectures in Different Humidity Conditions
WANG Yujuan, SONG Xiaochuang, YANG Juekuan, BI Kedong, CHEN Yunfei
机械工程学报. 2017, 53 (21): 86-94. doi: 10.3901/JME.2017.21.086
Abstract ( 434 )    PDF(1417KB) ( 306 )
References | Related Articles | Metrics
Life-span Test and Wear Behavior Analysis on Groove Shape Bionic Piston of Mud Pump
SUN Yiwen, RU Shaofeng, CONG Qian, ZHANG Huayang, ZHOU Haitao
机械工程学报. 2017, 53 (21): 95-101. doi: 10.3901/JME.2017.21.095
Abstract ( 558 )    PDF(4167KB) ( 277 )
References | Related Articles | Metrics
Theoretical Prediction of Mixed Frictional Heat of Mechanical Seals Based on Shoulder-shoulder Contact Model of Asperities
HU Qiong, SUN Jianjun, MA Chenbo, YU Bo
机械工程学报. 2017, 53 (21): 102-108. doi: 10.3901/JME.2017.21.102
Abstract ( 653 )    PDF(344KB) ( 513 )
References | Related Articles | Metrics
Conductivity and Tribological Properties of Conductive Polyaniline as Additives in Grease
HU Yichao, XIA Yanqiu
机械工程学报. 2017, 53 (21): 109-117. doi: 10.3901/JME.2017.21.109
Abstract ( 711 )    PDF(6979KB) ( 248 )
References | Related Articles | Metrics
Parametric Design of Shoe Last Based on Feature Size
HE Shuyu, LIU Bin
机械工程学报. 2017, 53 (21): 118-127. doi: 10.3901/JME.2017.21.118
Abstract ( 583 )    PDF(1563KB) ( 374 )
References | Related Articles | Metrics
Construction of Functional Directed Network and Its Computerized Realization
LI Yutong, WANG Yuxin, MAO Xiaohui
机械工程学报. 2017, 53 (21): 128-135. doi: 10.3901/JME.2017.21.128
Abstract ( 443 )    PDF(611KB) ( 322 )
References | Related Articles | Metrics
Analysis Algorithm of Workpiece Attachment/Detachment Based on Solution Existence and General Solution of Inequalities
QIN Guohua, WANG Zhe, WU Zhuxi, WANG Huamin, WU Tiejun, LI Ling
机械工程学报. 2017, 53 (21): 136-148. doi: 10.3901/JME.2017.21.136
Abstract ( 439 )    PDF(578KB) ( 243 )
References | Related Articles | Metrics
Method of Machining Error Tracing and Processing Performance Evaluation for Five-axis CNC Machine Tool Based on the Comprehensive Evaluation System
WANG Wei, LI Qingzhao, KANG Wenjun, TAO Wenjian, DU Li
机械工程学报. 2017, 53 (21): 149-157. doi: 10.3901/JME.2017.21.149
Abstract ( 880 )    PDF(1155KB) ( 587 )
References | Related Articles | Metrics
Research on Optimum Structure Design of 3D Printed Sand Moulds
YANG Tieyi, GUO Weizhong
机械工程学报. 2017, 53 (21): 158-166. doi: 10.3901/JME.2017.21.158
Abstract ( 683 )    PDF(1430KB) ( 462 )
References | Related Articles | Metrics
Solid Catalysts Based on Fenton Reaction for SiC Wafer in Chemical Mechanical Polishing
XU Shaoping, LU Jiabin, YAN Qiusheng, SONG Tao, PAN Jisheng
机械工程学报. 2017, 53 (21): 167-173. doi: 10.3901/JME.2017.21.167
Abstract ( 754 )    PDF(1083KB) ( 367 )
References | Related Articles | Metrics
Research on the Cutting Tool with Intelligent Transient Temperature Measuring System
CUI Yunxian, ZHANG Bowen, DING Wanyu, YAN Changgang, LIU Yi
机械工程学报. 2017, 53 (21): 174-180. doi: 10.3901/JME.2017.21.174
Abstract ( 762 )    PDF(1526KB) ( 357 )
References | Related Articles | Metrics
Random Forest and Principle Components Analysis Based on Health Assessment Methodology for Tool Wear
ZHAO Shuai, HUANG Yixiang, WANG Haoren, LIU Chengliang, LIU Xiao, LIANG Xinguang
机械工程学报. 2017, 53 (21): 181-189. doi: 10.3901/JME.2017.21.181
Abstract ( 803 )    PDF(727KB) ( 703 )
References | Related Articles | Metrics
FEM Numerical Model and Feedrate Optimization Based On-line Deflection Control of Thin-walled Parts in Flank Milling
HAN Zhenyu, JIN Hongyu, FU Yunzhong, FU Hongya
机械工程学报. 2017, 53 (21): 190-199. doi: 10.3901/JME.2017.21.190
Abstract ( 748 )    PDF(4312KB) ( 356 )
References | Related Articles | Metrics
Study on the Movement Rule of Discharge Products in Large Area Titanium Alloy Machining by Electrical Discharge Machining
LI Dong, LIU Zhigang, WANG Yiqing, HONG Jun, LU Bingheng
机械工程学报. 2017, 53 (21): 200-208. doi: 10.3901/JME.2017.21.200
Abstract ( 834 )    PDF(4517KB) ( 382 )
References | Related Articles | Metrics