Journal of Mechanical Engineering

2014, Volume 50 Issue 20 Publication:20 October 2014
Previous Issue Next Issue
论文
Investigation of Impact Damage Behavior of Different Composite Laminates by Using Ultrasonic Imaging
LIU Songping;LIU Feifei;GUO Enming
. 2014, 50 (20): 1-7. doi: 10.3901/JME.2014.20.001
Abstract ( 459 )    PDF(4482KB) ( 437 )
Related Articles | Metrics
Dispersion Characteristics and Inspection Frequency Selection of Guided Waves in Hollow Cylinders
MA Shuyi;WU Zhanjun;LIU Kehai;WANG Yishou
. 2014, 50 (20): 8-17. doi: 10.3901/JME.2014.20.008
Abstract ( 712 )    PDF(443KB) ( 253 )
Related Articles | Metrics
Gas Pipeline Small Leak Aperture Classification Based on Local Mean Decomposition Envelope Spectrum Entropy and SVM
SUN Jiedi; XIAO Qiyang; WEN Jiangtao; WANG Fei
. 2014, 50 (20): 18-25. doi: 10.3901/JME.2014.20.018
Abstract ( 651 )    PDF(1512KB) ( 404 )
Related Articles | Metrics
Research Progress of Fatigue Failure Prediction Methods and Damage Mechanism
LIU Jinna; XU Binshi; WANG Haidou; JIN Guo; ZHU Lina
. 2014, 50 (20): 26-34. doi: 10.3901/JME.2014.20.026
Abstract ( 548 )    PDF(825KB) ( 533 )
Related Articles | Metrics
Progresses on Research and Application of Metal Ultrasonic Surface Enhancement Technologies
ZHU Youli;WANG Yanli;BIAN Feilong;HOU Shuai;XIE Junfeng
. 2014, 50 (20): 35-45. doi: 10.3901/JME.2014.20.035
Abstract ( 808 )    PDF(376KB) ( 416 )
Related Articles | Metrics
Controller Design for Cold Rolling Mill HAGC System with Measurement Delay Perturbation
HUA Changchun; YU Caixia
. 2014, 50 (20): 46-53. doi: 10.3901/JME.2014.20.046
Abstract ( 457 )    PDF(424KB) ( 567 )
Related Articles | Metrics
Research on Low Cycle Fatigue Behavior of BGA Structure Lead-free Solder Joints
QIN Hongbo; LI Wangyun; LI Xunping; ZHANG Xinping
. 2014, 50 (20): 54-62. doi: 10.3901/JME.2014.20.054
Abstract ( 585 )    PDF(2552KB) ( 365 )
Related Articles | Metrics
Influence of Patch Shape and Size on Adhesively Bonded Composite Repair
MIAO Xuezhou;LI Cheng;TIE Ying;GUO Wenhui
. 2014, 50 (20): 63-69. doi: 10.3901/JME.2014.20.063
Abstract ( 519 )    PDF(1577KB) ( 321 )
Related Articles | Metrics
Structure and Properties of Nickel-based Surfacing on Crust Breaker Deposited by Plasma Arc Welding
ZHANG Guodong; LI Li; LIU Nian; CAO Hongmei; MAO Yan
. 2014, 50 (20): 70-76. doi: 10.3901/JME.2014.20.070
Abstract ( 498 )    PDF(10010KB) ( 205 )
Related Articles | Metrics
A Mixed Hardening Model of Ultrafine-grained Materials and Numerical Simulation
ZHENG Zhanguang;XIE Changji;SUN Teng;YUAN Shuai
. 2014, 50 (20): 77-83. doi: 10.3901/JME.2014.20.077
Abstract ( 457 )    PDF(266KB) ( 428 )
Related Articles | Metrics
Evolution of M-A Constituents in HAZ and Its Effect on Toughness of MAG Joint of Granular Bainitic Steel Q690C
CAO Zhimin; ZHANG Guifeng; ZHANG Jianming; HUANG Chao; ZHAO Jipeng
. 2014, 50 (20): 84-92. doi: 10.3901/JME.2014.20.084
Abstract ( 424 )    PDF(3562KB) ( 322 )
Related Articles | Metrics
Study on Stability Performance of Friction Stir Welded Aluminum Alloy Stiffened Panel under Shear Load
SHAO Qing;HE Yuting;ZHANG Teng;WU Liming
机械工程学报. 2014, 50 (20): 93-99. doi: 10.3901/JME.2014.20.093
Abstract ( 516 )    PDF(2272KB) ( 262 )
Related Articles | Metrics
论文
Research on Proportional Solenoid Valve Used for Automatic Transmission
MENG Fei;TAO Gang;CHEN Huiyan
. 2014, 50 (20): 100-106. doi: 10.3901/JME.2014.20.100
Abstract ( 601 )    PDF(1075KB) ( 326 )
Related Articles | Metrics
Experimental Study of Load Characteristics of Direct-ijection Engine Fueled with Various Proportions of CH4 and N2-Hydrogen Blends
SHI Bin;GUO Linfu;LIU Jianhua
. 2014, 50 (20): 107-112. doi: 10.3901/JME.2014.20.107
Abstract ( 891 )    PDF(354KB) ( 301 )
Related Articles | Metrics
Rule Correction-based Instantaneous Optimal Energy Management Strategy for Single-shaft Parallel Hybrid Electric Bus
HUANG Shuo; LI Liang; YANG Chao; SONG Jian; LI Lei; ZHANG Lipeng
. 2014, 50 (20): 113-121. doi: 10.3901/JME.2014.20.113
Abstract ( 473 )    PDF(910KB) ( 278 )
Related Articles | Metrics
Multi-case Topology Optimization of Body Structure Considering
LAN Fengchong; LAI Fanjie; CHEN Jiqing; MA Fangwu
. 2014, 50 (20): 122-128. doi: 10.3901/JME.2014.20.122
Abstract ( 636 )    PDF(743KB) ( 464 )
Related Articles | Metrics
Method on Convex Surface Drawing for Automobile Panel
GONG Zhihui; LAN Zhichun; ZHOU Shunfeng; LI Lin
. 2014, 50 (20): 129-135. doi: 10.3901/JME.2014.20.129
Abstract ( 497 )    PDF(4107KB) ( 343 )
Related Articles | Metrics
Power Flowing Control Strategy of Series Hybrid Tracked Bulldozer at the Typical Working Condition
SONG Qiang; ZENG Pu; HE Shijuan;WANG Hong
. 2014, 50 (20): 136-142. doi: 10.3901/JME.2014.20.136
Abstract ( 693 )    PDF(704KB) ( 352 )
Related Articles | Metrics
Weave Method Study of Customer Correlated Load Spectrum
LI Wenli; SHI Xiaohui; KE Jian; SHI Quan; ZOU Xihong; YU Yong; YI Peng
. 2014, 50 (20): 143-150. doi: 10.3901/JME.2014.20.143
Abstract ( 597 )    PDF(962KB) ( 650 )
Related Articles | Metrics
Techno-economic Study of Carbon Capture from Coal-fired Power Plant Using MEA Assisted by Solar Organic Rankine Cycle for Power Generation
TAN Yuting;ZHAO Li;BAO Junjiang;DENG Shuai
. 2014, 50 (20): 151-156. doi: 10.3901/JME.2014.20.151
Abstract ( 526 )    PDF(347KB) ( 298 )
Related Articles | Metrics
Correcting Algorithm on Experimental Results of Room Air Conditioner Performance with Dry-bulb and Wet-bulb Temperatures Changing within Allowances
ZHANG Zhongbin; DU Kai; HUANG Hu; ZHANG Ruonan
. 2014, 50 (20): 157-162. doi: 10.3901/JME.2014.20.157
Abstract ( 402 )    PDF(229KB) ( 191 )
Related Articles | Metrics
Influence of Heat Leak on Efficiency at Maximum Power and Its Bounds of Low-dissipation Carnot Heat Engine
ZHANG Yanchao;HE Jizhou
. 2014, 50 (20): 163-166. doi: 10.3901/JME.2014.20.163
Abstract ( 375 )    PDF(93KB) ( 240 )
Related Articles | Metrics
Design on Estimation Algorithm of the Pump Source Impedance and the Signal Processing Software for Secondary Source Method
SONG Yuechao; XU Bing; YANG Huayong; LIU Yingjie
. 2014, 50 (20): 167-174. doi: 10.3901/JME.2014.20.167
Abstract ( 507 )    PDF(1485KB) ( 279 )
Related Articles | Metrics
Numerical and Experimental Studies of Alternative Combined
YANG Xiaolong;LI Decai;HE Xinzhi;ZHANG Huitao
. 2014, 50 (20): 175-179. doi: 10.3901/JME.2014.20.175
Abstract ( 469 )    PDF(331KB) ( 339 )
Related Articles | Metrics
Arm Lifting Circuit and Features of Large Face-shovel Hydraulic Excavator
WANG Yongjin;QUAN Long;YANG Jing
. 2014, 50 (20): 180-187. doi: 10.3901/JME.2014.20.180
Abstract ( 503 )    PDF(2303KB) ( 464 )
Related Articles | Metrics
Nonlinear Snap-through Analysis of Magnetic-mechanical Based Large Stroke Multi-stable Mechanism
ZHAO Jian;CHEN Guoxi;GAO Renjing;LIU Shutian
. 2014, 50 (20): 188-194. doi: 10.3901/JME.2014.20.188
Abstract ( 547 )    PDF(1205KB) ( 290 )
Related Articles | Metrics
ESTA-HoQ Network Model for Quality-oriented Design of Overall Parameters of Large Complex Product by Multiple Participants
LI Yaping;LIU Sifeng;FANG Zhigeng
. 2014, 50 (20): 195-204. doi: 10.3901/JME.2014.20.195
Abstract ( 505 )    PDF(409KB) ( 503 )
Related Articles | Metrics
Network Design Model for Remanufacturing Closed-loop Supply Chain Competition
YANG Yuxiang
. 2014, 50 (20): 205-212. doi: 10.3901/JME.2014.20.205
Abstract ( 522 )    PDF(162KB) ( 342 )
Related Articles | Metrics