Journal of Mechanical Engineering

2015, Volume 51 Issue 8 Publication:15 April 2015
Previous Issue Next Issue
Simulation for Network Deployment of Indoor Workspace Measurement and Positioning System
XUE Bin, ZHENG Yingya, XIONG Zhi, ZHU Jigui
机械工程学报. 2015, 51 (8): 1-8. doi: 10.3901/JME.2015.08.001
Abstract ( 537 )    PDF(808KB) ( 232 )
Related Articles | Metrics
Discussion on Stress Quantitative Evaluation using Metal Magnetic Memory Method
ZHANG Weimin, QIU Zhongchao, YUAN Junjie, YU Xia
机械工程学报. 2015, 51 (8): 9-13. doi: 10.3901/JME.2015.08.009
Abstract ( 553 )    PDF(346KB) ( 308 )
Related Articles | Metrics
Experimental Investigation of Multiple Defect States in Two-dimensional Phononic Crystal with (32.4.3.4) Lattice
ZHAO Huanyu, WANG Yuesheng
机械工程学报. 2015, 51 (8): 14-19. doi: 10.3901/JME.2015.08.014
Abstract ( 428 )    PDF(1689KB) ( 266 )
Related Articles | Metrics
New Development on Technology and Equipment of Sheet Hydroforming
YUAN Shijian, LIU Wei, XU Yongchao
机械工程学报. 2015, 51 (8): 20-28. doi: 10.3901/JME.2015.08.020
Abstract ( 578 )    PDF(6430KB) ( 648 )
Related Articles | Metrics
Fatigue Life Prediction of the Bumpy Ridge Joining of the Heavy Die Forging Press with Steel Wire Wound
HE Wenbin, ZENG Pan, LIN Feng, YAN Yongnian, ZHANG Lei
机械工程学报. 2015, 51 (8): 29-36. doi: 10.3901/JME.2015.08.029
Abstract ( 884 )    PDF(1388KB) ( 243 )
Related Articles | Metrics
Research on Microstructure Properties and Wear and Corrosion Resistance of FeCr Repaired Coating on KMN Steel by Laser Cladding
ZHAO Yanhua, SUN Jie, LI Jianfeng
机械工程学报. 2015, 51 (8): 37-43. doi: 10.3901/JME.2015.08.037
Abstract ( 666 )    PDF(4607KB) ( 476 )
Related Articles | Metrics
Effect of Stress Ratio on the Transition Point of Fatigue Crack Growth Curve in the Near-threshold Regime of a 25Cr2Ni2MoV Steel Welded Joint
DU Yannan, ZHU Mingliang, XUAN Fuzhen
机械工程学报. 2015, 51 (8): 44-49. doi: 10.3901/JME.2015.08.044
Abstract ( 603 )    PDF(451KB) ( 420 )
Related Articles | Metrics
Fatigue Crack Growth Experiment and Modeling for Rubbers Used in Isolators under Variable Amplitude Loads
SHANGGUAN Wenbin, , WANG Xiaoli, DUAN Xiaocheng, LIU Guobing, YAN Jiao
机械工程学报. 2015, 51 (8): 50-58. doi: 10.3901/JME.2015.08.050
Abstract ( 503 )    PDF(420KB) ( 209 )
Related Articles | Metrics
Experimental Investigation and Result Interpretation of Snapping with Tearing Process on Light Metal Scrap
ZHOU Hongquan, LIU Jianxiong, YANG Bangcheng, HOU Jie, SAN Hongjun, FAN Yujin
机械工程学报. 2015, 51 (8): 59-66. doi: 10.3901/JME.2015.08.059
Abstract ( 410 )    PDF(1409KB) ( 211 )
Related Articles | Metrics
Multiple Nonlinear Regression Model of Weld Bead Shape for High Nitrogen Steel by Laser-arc Hybrid Welding
SUN Shuo, LIU Shuangyu, JIA Dongsheng, ZHANG Hong, LIU Fengde
机械工程学报. 2015, 51 (8): 67-75. doi: 10.3901/JME.2015.08.067
Abstract ( 1228 )    PDF(1608KB) ( 199 )
Related Articles | Metrics
Reverse Bending Research of Leveling on Plastic Hardening Material
LIU Dongye, HE Anrui, WANG Haibin, HE Longjun
机械工程学报. 2015, 51 (8): 76-83. doi: 10.3901/JME.2015.08.076
Abstract ( 625 )    PDF(1937KB) ( 362 )
Related Articles | Metrics
Progressive Damage Simulation and Strength Prediction of 2D Triaxial Braided Composites
ZHANG Fangfang, LIU Cai
机械工程学报. 2015, 51 (8): 84-91. doi: 10.3901/JME.2015.08.084
Abstract ( 487 )    PDF(1751KB) ( 242 )
Related Articles | Metrics
Control of Gear Shift for Planetary Transmission Based on Pressure Estimation of Shifting Actuators
WANG Erlie, TAO Gang, ZHU Min, CHEN Huiyan
机械工程学报. 2015, 51 (8): 92-98. doi: 10.3901/JME.2015.08.092
Abstract ( 572 )    PDF(472KB) ( 513 )
Related Articles | Metrics
Optimal Control of Remanufacturing Engine Crankshaft’s Axial Clearance under Uncertain Environment
GE Maogen, WANG Shaoming, LIU Mingzhou, LIU Conghu, SHAO Jiang
机械工程学报. 2015, 51 (8): 99-106. doi: 10.3901/JME.2015.08.099
Abstract ( 525 )    PDF(335KB) ( 200 )
Related Articles | Metrics
Study on Simulation of Coupled Heat Transfer, Stress and Wear Behavior in Pin-on-disc Experiments
ZHANG Fangyu, GUI Liangjin, FAN Zijie
机械工程学报. 2015, 51 (8): 107-115. doi: 10.3901/JME.2015.08.107
Abstract ( 578 )    PDF(2849KB) ( 344 )
Related Articles | Metrics
Gradient-based Equivalent Static Loads Method for Structure Nonlinear Dynamic Optimization Problem
CHEN Tao, CHEN Zikai, DUAN Libin, WANG Bin, CHENG Aiguo
机械工程学报. 2015, 51 (8): 116-124. doi: 10.3901/JME.2015.08.116
Abstract ( 615 )    PDF(1119KB) ( 249 )
Related Articles | Metrics
Bionic Method for Improving Tire Anti-hydroplaning Performance
ZHOU Haichao, LIANG Chen, YANG Jian, WANG Guolin, XUE Kaixin
机械工程学报. 2015, 51 (8): 125-130. doi: 10.3901/JME.2015.08.125
Abstract ( 929 )    PDF(748KB) ( 657 )
Related Articles | Metrics
Equivalent Stress Evaluation of the Load Spectrum Measured on the EMU Axle Based on Damage Tolerance
ZHOU Suxia, LI Fusheng, XIE Jilong, YAO Shengzhuo
机械工程学报. 2015, 51 (8): 131-136. doi: 10.3901/JME.2015.08.131
Abstract ( 614 )    PDF(1394KB) ( 407 )
Related Articles | Metrics
Material Parameters Determination and Simulation of Rubber Bushing
WEI Zhigang, CHEN Xiaohua, WU Shenrong, CHEN Haibo
机械工程学报. 2015, 51 (8): 137-143. doi: 10.3901/JME.2015.08.137
Abstract ( 470 )    PDF(5020KB) ( 844 )
Related Articles | Metrics
Relationship Between Optimum Curved Blade Generate Line and Cascade Solidity in Linear Compressor Cascade
LING Jing, DU Xin, WANG Songtao, WANG Zhongqi
机械工程学报. 2015, 51 (8): 144-150. doi: 10.3901/JME.2015.08.144
Abstract ( 459 )    PDF(928KB) ( 248 )
Related Articles | Metrics
Thermal Performance Analysis on the New Organic Rankine Cycle-bypass Flash System Considering the Temperature Difference of Heat Exchanger
YANG Xinle, HUANG Feifei, LI Weikang, DAI Wenzhi, DONG Sihan
机械工程学报. 2015, 51 (8): 151-157. doi: 10.3901/JME.2015.08.151
Abstract ( 505 )    PDF(950KB) ( 253 )
Related Articles | Metrics
An Improved Resolution Index of the Stable Combustion of the Steam Coal
FAN Jinyuan, CHEN Hongwei, WANG Zhi
机械工程学报. 2015, 51 (8): 158-163. doi: 10.3901/JME.2015.08.158
Abstract ( 507 )    PDF(336KB) ( 313 )
Related Articles | Metrics
Three-dimensional Digital Process Model and Its Expression Framework
QIAO Lihong, KAO Shuting, YANG Zhibing
机械工程学报. 2015, 51 (8): 164-71. doi: 10.3901/JME.2015.08.164
Abstract ( 473 )    PDF(756KB) ( 222 )
Related Articles | Metrics
Design and Analysis of Magnetorheological Damper Paralleling with Constant Throttling Orifices
PENG Zhizhao, ZHANG Jinqiu, YUE Jie, ZHANG Lei, HUANG Dashan
机械工程学报. 2015, 51 (8): 172-177. doi: 10.3901/JME.2015.08.172
Abstract ( 513 )    PDF(1115KB) ( 402 )
Related Articles | Metrics
Topological Sorting-based Two-stage Nested Ant Colony Algorithm for Job-shop Scheduling Problem
LUO Yabo
机械工程学报. 2015, 51 (8): 178-184. doi: 10.3901/JME.2015.08.178
Abstract ( 512 )    PDF(434KB) ( 348 )
Related Articles | Metrics
Design and Performance Testing of a New Type Piezoelectric Rotary Actuator
YU Yuemin, LENG Jinsong
机械工程学报. 2015, 51 (8): 185-190. doi: 10.3901/JME.2015.08.185
Abstract ( 420 )    PDF(34776KB) ( 251 )
Related Articles | Metrics
QAR Data Health Monitoring Method of Civil Aircraft Bleed Air System
LIANG Kun, , ZUO Hongfu, SUN Jianzhong, LI Huaiyuan, DING Xuan, LIU Ruochen, WANG Ronghui
机械工程学报. 2015, 51 (8): 191-197. doi: 10.3901/JME.2015.08.191
Abstract ( 474 )    PDF(549KB) ( 223 )
Related Articles | Metrics
Effect of Measurement Volume Shift and Fringe Distortion Due to Beam Refractions through the Plane Window for LDA Applications
LI Jin, YAN Qingdong, WEI Wei, CUI Lishui
机械工程学报. 2015, 51 (8): 198-203. doi: 10.3901/JME.2015.08.198
Abstract ( 415 )    PDF(625KB) ( 328 )
Related Articles | Metrics
Heat Transfer and Flow Characteristics of Small Scale Circular Cylinder Vortex Generator
WANG Jiansheng, ZHAO Yunjian, ZHU Qiang
机械工程学报. 2015, 51 (8): 204-212. doi: 10.3901/JME.2015.08.204
Abstract ( 435 )    PDF(1707KB) ( 371 )
Related Articles | Metrics