EXPERIMENTAL RESEARCH ON STRESS INTENSITY FACTOR FOR SURFACE CRACK AT EXTERNAL THREAD ROOT OF THREADED CONNECTION

Abstract

Abstract: An experimental research on stress intensity factor in tension for surface crack at external thread root of threaded connection is carried out by using James-Anderson’s method[1]. On the basis of SIF normalized coefficient values gained from a vast amount of fatigue crack propagation experiments, the approximate expressions of stress intensity factor on the deepest point and surface point of surface crack are obtained by means of stepwise regression analysis. By comparing the results obtained with stress intensity factors for surface crack in tension round bar[2~4] and tension round bar with threads, it is shown that the regularity is good among them.

Key words: Stress intensity factor, Surface crack, Threaded connection

Wei Jiaquan;Zhong Boming;Xu Keming. EXPERIMENTAL RESEARCH ON STRESS INTENSITY FACTOR FOR SURFACE CRACK AT EXTERNAL THREAD ROOT OF THREADED CONNECTION[J]. , 1994, 30(1): 37-43.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1994/V30/I1/37

[1]	ZHANG Shun, XUE He, ZHANG Jiaqing, WU Jun. Semi-elliptical Surface Crack Propagation of PMMA Based on Cohesive Zone Model [J]. Journal of Mechanical Engineering, 2025, 61(24): 158-167.
[2]	WANG Chao, YANG Bing, ZHU Tao, YANG Guangwu, XIAO Shoune. Surface Crack Propagation Life Study of Welded Structures Using Phased-array Ultrasonic Total Focusing Imaging [J]. Journal of Mechanical Engineering, 2025, 61(22): 69-79.
[3]	DU Kaikai, BAO Chen, HE Guangwei. Method to Evaluate Fatigue Crack Growth Rate of Semi-elliptical Surface Cracked Plates Under Bending [J]. Journal of Mechanical Engineering, 2024, 60(24): 153-162.
[4]	WEI Yongqiao, LIU Wenwen, GUO Rui, LUO Lan, WANG Shaojiang, QI Xiaohu, ZHANG Jianquan. Contact Fatigue Crack Propagation Characteristics of Cylindrical Gear with Variable Hyperbolic Circular-arc-tooth-trace [J]. Journal of Mechanical Engineering, 2024, 60(21): 180-195.
[5]	YU Jian, GOU Baiyong, CHEN Guiyong, ZHANG Teng, MA Binlin, FAN Xianghong, CHEN Xin, WANG Yitao. Analysis of Fatigue Crack Growth Performance of Adhesive-rivet Hybrid Repaired Structure [J]. Journal of Mechanical Engineering, 2023, 59(22): 352-368.
[6]	DAI Jianbo, SU Honghua, FU Yucan, DING Wenfeng, SI Lei, CHEN Jiajia. Effect of Grinding Speed on Mechining Damage of Silicon Carbide Ceramics [J]. Journal of Mechanical Engineering, 2022, 58(21): 316-330.
[7]	WANG Peng, ZHOU Junyuan, LI Hongwei, XIANG Zhiyu. Simulation of the Premium Threaded Connections Deformation under Cyclic Loading by Considering the Bauschinger Effect [J]. Journal of Mechanical Engineering, 2022, 58(16): 21-32.
[8]	DAI Jianbo, SU Honghua, WANG Zhongbin, DING Wenfeng, FU Yucan, CHEN Jiajia. Research on the Crack Damage Formation Mechanisms of Polycrystalline Silicon Carbide Ceramics in Grinding Process [J]. Journal of Mechanical Engineering, 2022, 58(13): 307-320.
[9]	HU Huayan, WEN Jianfeng, WU Weifeng, TAN Jianping, TU Shantung. Analysis of Surface Creep Crack Growth Behavior under High Temperature Creep Condition [J]. Journal of Mechanical Engineering, 2020, 56(24): 40-50.
[10]	HUANG Maobo, CAI Lixun, QI Shuang. Semi-analytical Method for Solving the Stress Intensity Factor of Mode Ⅰ-Ⅱ Crack Based on Energy Density Equivalence Principle [J]. Journal of Mechanical Engineering, 2020, 56(22): 68-75.
[11]	DONG Baotian, WANG Kun, HAN Bangcheng, ZHENG Shiqiang. High-speed Maglev Blower Turbine Locking Device Design Analysis and Experiment Research [J]. Journal of Mechanical Engineering, 2019, 55(3): 154-161.
[12]	ZHOU Suxia, ZHAO Xinghan, SUN Chenlong, SUN Rui. Prediction of Crack Propagation Life of Cast Steel Brake Disc of EMU [J]. Journal of Mechanical Engineering, 2018, 54(24): 154-159.
[13]	WU Jiateng, YANG Yu, CHENG Junsheng. The Time-varying Mesh Stiffness Calculation for Gear Tooth Crack based on Analytical-finite Element Method [J]. Journal of Mechanical Engineering, 2018, 54(23): 56-62.
[14]	ZHONG Bin, LI Xuewu, YU Zhengyang, ZHANG Chuanwei. Process and Experimental Research of Controllable Pneumatic Rotary Bending Cropping of 304 Stainless Steel Bar [J]. Journal of Mechanical Engineering, 2018, 54(22): 47-54.
[15]	HE Yi, CAI Lixun, CHEN Hui. Unified Model of K Factor and Compliance Based on Energy Equivalence Principle [J]. Journal of Mechanical Engineering, 2018, 54(14): 98-106.

EXPERIMENTAL RESEARCH ON STRESS INTENSITY FACTOR FOR SURFACE CRACK AT EXTERNAL THREAD ROOT OF THREADED CONNECTION

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments