| [1] |
LI Haoran, ZHOU Haichao, WANG Guolin, ZHANG Rongyun, ZHAO Chunlai.
Road Friction Coefficient and Tire Cornering Characteristics Parameters Estimation Based on PMSM Sensorless Control
[J]. Journal of Mechanical Engineering, 2026, 62(8): 196-209.
|
| [2] |
ZHANG Buyun, WANG Xiang, LUO Minglu, WANG Yong, ZHANG Yunshun, XU Xing, TAN Chin-An.
Structural Design and Performance Optimization of a New Inflatable Hydraulic-electric Energy Regenerative Suspension System
[J]. Journal of Mechanical Engineering, 2026, 62(7): 244-254.
|
| [3] |
ZHU Yuda, QIAO Baijie, WANG Yanan, FU Yu, LIANG Jun, LIU Meiru, WEN Bi, CHEN Xuefeng.
OPR-free Blade Tip Timing Vibration Velocity Measurement Method
[J]. Journal of Mechanical Engineering, 2026, 62(7): 255-268.
|
| [4] |
DENG Jiadong, GUAN Shanyue, WANG Xiaokai, QIAN Dongsheng, LIU Chao, LIU Wei, HUA Lin.
Development and Application of Network Collaborative and Intelligent Ring Rolling Technology for High-end Equipment Large Rings
[J]. Journal of Mechanical Engineering, 2026, 62(6): 65-86.
|
| [5] |
LIU Jiaxu, WANG Dacheng, SHI Mingjie, CHEN Shuaifeng, ZHANG Shihong, CHENG Ming.
Investigation on Microstructure Evolution of Aero-engine Blades under Combined Forming Process with Flat Cross Wedge Rolling and Die Forging
[J]. Journal of Mechanical Engineering, 2026, 62(6): 87-99.
|
| [6] |
ZHOU Qiang, LU Honghong, GUO Denggang, CHEN Pengwan, WANG Baoyu.
Microstructure and Mechanical Behavior of TA2/TC4 Titanium Alloy Composites Fabricated by Explosion Welding + Rolling
[J]. Journal of Mechanical Engineering, 2026, 62(6): 100-110.
|
| [7] |
HU Qiwei, SUN Yongji, ZHANG Jianchao, REN Xinyi, GAO Huimin, JI Ce, HUANG Huagui.
Research on Surface Wear Detection Method for Hot Rolling Work Roll Based on Texture Features and Ensemble Learning
[J]. Journal of Mechanical Engineering, 2026, 62(6): 111-120.
|
| [8] |
CHEN Nan, XIAO Zihan, YU Chao, QI Zichen, REN Zhongkai, XIAO Hong.
Modeling Method of Cold Rolling Compounding Process of Heterogeneous Metals and Analysis of Compounding Mechanism
[J]. Journal of Mechanical Engineering, 2026, 62(6): 132-141.
|
| [9] |
LEI Jiawei, WANG Shuting, YUE Chongxiang, LIN Ping, PENG Wen, SUN Jie, ZHANG Dianhua.
Deep Learning-based Dynamic Modeling of Hot Rolled Gague-looper System
[J]. Journal of Mechanical Engineering, 2026, 62(6): 142-153.
|
| [10] |
LI Zixuan, LI Hongji, XU Zhixiang, NIU Hui, JI Ce, WANG Tao.
Research on the Bonding Forming Mechanism of Carbon Steel/Stainless Steel Bimetallic Tubes with Three-roll Corrugated Skew Rolling
[J]. Journal of Mechanical Engineering, 2026, 62(6): 174-184.
|
| [11] |
LIU Yanxiao, LIU Yuanming, HU Xilong, LI Kaiye, WANG Tao, HUANG Qingxue.
Effect of Different Reduction Ratios on the Longitudinal Corrugated Hot Rolling Deformation of 316L/Q370/316L Clad Plate
[J]. Journal of Mechanical Engineering, 2026, 62(6): 197-208.
|
| [12] |
XU Hongwei, LIU Lilan, ZHANG Jie, QIN Wei, XING Hongwen, WANG Wei, LIU Siren, Lü Youlong.
AI Twin Control Method System for Aeronautical Intelligent Manufacturing Driven by Industrial Large Models
[J]. Journal of Mechanical Engineering, 2026, 62(5): 61-73.
|
| [13] |
ZHANG Tao, HE Jiahao, SHI Yongping, ZHAO Ping, WANG Jian, WANG Wei.
Dynamic Parameter Identification of Collaborative Robot Based on Improved Stribeck Friction Model
[J]. Journal of Mechanical Engineering, 2026, 62(5): 151-167.
|
| [14] |
SUN Peng, GE Menghu, RUI Chao, CAO Likang, CHEN Bo, WANG Jianbin, LI Yanbiao.
Dynamic Modeling and Parameter Identification of Hybrid Bipedal Robotic Legs
[J]. Journal of Mechanical Engineering, 2026, 62(5): 192-203.
|
| [15] |
WU Jinhui, CHEN Yongchang, WU Yanan, HAO Huiqian, YUAN Xiang, TAO Yourui.
A Digital Twin-driven Approach for Operational Status Monitoring and Virtual Debugging of Reflector Antennas
[J]. Journal of Mechanical Engineering, 2026, 62(5): 263-273.
|
