REVIEW THE CURRENT QUESTIONS AND STRATEGIES ABOUT MULTILAYER SINTERING SUPERABRASIVE TOOLS AND CONCEIVE THE DEVELOPMENT OF FUTURE TOOLS

Abstract

Abstract: The main questions of current multi-layer sintering superabrasive tools are that their grains easily fall off from the matrix, the cuts of them difficultly outcrop in machining process, and grains load and grinding is not in proportion because of the stochastic grain distribution. The improving strategies and proceedings about these are reviewed. A new generation mono-layer brazing superabrasive tools and its encouragements are described. The advanced project is put forward to fabricate the renewal product of multi-layer superabrasive tools with brazing instead of sintering, exploiting new technology of the three-dimensional optimum distribution of grains and holes through using the experience of porous metal fabrication technology.

Key words: Brazing, Superabrasive, Turing and dressing, Wheel topography

CLC Number:

TG 7

Su Honghua;Xu Hongjun;Fu Yucan;Xiao Bing. REVIEW THE CURRENT QUESTIONS AND STRATEGIES ABOUT MULTILAYER SINTERING SUPERABRASIVE TOOLS AND CONCEIVE THE DEVELOPMENT OF FUTURE TOOLS[J]. , 2005, 41(3): 12-17.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2005/V41/I3/12

[1]	WANG Dada, XU Haitao, LIU Ping, JIN Xia, Lü Chuanyang, HE Yanming. Optimization of Residual Stress in AlN-Cu Brazing Joint Based on Heterogeneous Interlayer [J]. Journal of Mechanical Engineering, 2025, 61(8): 98-106.
[2]	YANG Jia, ZHANG Shouzhuang, LU Xuan, XU Xin, WANG Ce, LIN Panpan, MEI Han, LIU Yue, HE Peng, LIN Tiesong. Study of Copper-based Composite Brazing Process of SiC_f/SiC Composites with Cobalt-based High Temperature Alloys [J]. Journal of Mechanical Engineering, 2025, 61(21): 437-445.
[3]	LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang. Effect of Brazing Time on TiAl Joint Brazed with TiH₂-65Ni+TiB₂ Filler [J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
[4]	WANG Xingxing, WU Gang, HE Peng, YANG Xiaohong. First-principles Calculations on Interface Behavior of Ni/WC Composite Brazed Coatings [J]. Journal of Mechanical Engineering, 2024, 60(4): 296-304.
[5]	GU Lei, WANG Pengcheng, YAN Yaotian, CHEN Haiyan, LI Wenya. Review on Negative Expansion Materials in Composite Materials and Brazing [J]. Journal of Mechanical Engineering, 2024, 60(22): 1-20.
[6]	WANG Pengcheng, LI Jinzheng, LIU Weihan, CHEN Haiyan, LI Wenya. Research on Microstructure and Mechanical Properties of Brazed Joint of Al_0.3CoCrFeNi High Entropy Alloy and YG15 Hard Alloy [J]. Journal of Mechanical Engineering, 2024, 60(22): 86-93.
[7]	ZHANG Zhenyang, WANG Jingkuan, LI Peng, WANG Yinchen, LI Chao, ZHANG Liangliang, DONG Honggang. Effects of Brazing Filler Composition and Brazing Temperature on the Microstructure and Mechanical Properties of Ti₂AlNb and GH4169 Alloy Brazed Joints [J]. Journal of Mechanical Engineering, 2024, 60(22): 116-129.
[8]	SHEN Zhikang, WANG Bo, YANG Yi, GUAN Yuehui, ZHOU Ping, HOU Wentao, PIAO Zhongyu, LIU Xiaochao, HUANG Guoqiang, YANG Xiawei, CHEN Haiyan, TIAN Yanhong, LI Wenya, LI Huijun. Interfacial Bonding Mechanism and Fatigue Performance of Al/Steel Dissimilar Welds Fabricated via Friction Stir Brazing [J]. Journal of Mechanical Engineering, 2024, 60(22): 130-138.
[9]	JIA Xu, HU Lifang, LI Zihao, ZHENG Zhi, LIU Wei, ZHANG Peng. Study on the Brazing Mechanism and Mechanical Properties of Glass-Copper Joining Process Based on Anodic Bonding [J]. Journal of Mechanical Engineering, 2024, 60(2): 140-149.
[10]	GAO Dejun, WU Shaowang, YANG Shengxu, ZHANG Chenghao, ZHOU Long, SI Xiaoqing, LI Chun, QI Junlei, CAO Jian. Study on the Influences of High Temperature Treatment on the Interfacial Microstructure and Mechanical Properties of TA1/TC4 Brazed Joints [J]. Journal of Mechanical Engineering, 2024, 60(14): 109-116.
[11]	LI Juan, CHANG Ziheng, ZHAO Honglong, LI Lixin, ZHANG Yingzhe, TU Quan, QIN Qingdong, HE Peng. Study on the Microstructures and Properties of 70% SiC_p/Al Composites Joints Brazed with Titanium Foam/AlSiMg Composite Filler Metal [J]. Journal of Mechanical Engineering, 2023, 59(14): 92-105.
[12]	LONG Weimin, LIU Dashuang, WU Aiping, ZHONG Sujuan, WANG Decheng. Influence of Size and Content on the Wear Resistance of Induction Brazing Diamond Coating in Air [J]. Journal of Mechanical Engineering, 2023, 59(12): 225-235.
[13]	LI Xinyue, LI Jian, ZHANG Jiankang, LIN Panpan, LIN Tiesong, HE Peng. Research on the Process and Mechanism of Reactive Air Brazing of Al₂O₃Ceramics with AgCu28-B₂O₃ Filler [J]. Journal of Mechanical Engineering, 2023, 59(10): 48-55.
[14]	MAO Yamei, HEI Hongjun, GAO Jie, ZHENG Ke, YU Shengwang, WANG Yao. Research Progress of Brazing Diamond and Application of Tools [J]. Journal of Mechanical Engineering, 2022, 58(4): 80-93.
[15]	QIN Guoliang, GENG Peihao, CHEN Yong, REN Wenjian. Numerical Analysis of Stress Evolution in MIG Arc Brazing-fusion Welding of Al Alloy to Galvanized Steel Plate [J]. Journal of Mechanical Engineering, 2021, 57(2): 87-96.

REVIEW THE CURRENT QUESTIONS AND STRATEGIES ABOUT MULTILAYER SINTERING SUPERABRASIVE TOOLS AND CONCEIVE THE DEVELOPMENT OF FUTURE TOOLS

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments