EFFECT OF Si ON CRACK RESISTANCE OF LASER CLAD LAYERS OF GREY IRON

Abstract

Abstract: Volume fractions of austenite and cementite in laser clad layers are adjusted through adjusting the mass fraction of Si to avoid the formation of cracks. Based on optimum parameters of laser processing to prevent cracks, effects of Si on the volume fractions of austenite, and on the ratio of surface cracking in laser clad layers are systematically investigated for the first time under the condition of no preheating. Cracking mechanisms is analysed. At last new cladding materials that can restrain cracking of laser clad layer is obtained.

Key words: Austenite Grey iron, Crack Si element, Laser clad layer

CLC Number:

TG40

Luan Jingfei;Yan Mi. EFFECT OF Si ON CRACK RESISTANCE OF LASER CLAD LAYERS OF GREY IRON[J]. , 2002, 38(10): 69-73.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I10/69

[1]	ZHENG Wenjian, HU Minghui, YU Yang, FENG Daochen, YAN Dejun, YANG Jianguo. Study on the Influence of Softening Behavior of High Magnesium Aluminum Alloy Welded Joint on Welding Residual Stress [J]. Journal of Mechanical Engineering, 2026, 62(4): 180-189.
[2]	LIU Zishen, CAO Rui. Research Progress on Toughness Control of Low Carbon Martensitic Stainless Steel Weld Metal [J]. Journal of Mechanical Engineering, 2025, 61(24): 48-62.
[3]	WANG Chao, YANG Bing, ZHU Tao, YANG Guangwu, XIAO Shoune. Surface Crack Propagation Life Study of Welded Structures Using Phased-array Ultrasonic Total Focusing Imaging [J]. Journal of Mechanical Engineering, 2025, 61(22): 69-79.
[4]	LI Guannan, MAO Zhixu, WANG Chongyang, HU Long, DENG Dean. Influence of External Constraint on Welding Residual Stress of NM450TP Steel T-joint [J]. Journal of Mechanical Engineering, 2025, 61(20): 91-102.
[5]	HU Lei, DU Jiaqing, WANG Rui, WANG Xue. Optimization of Local Post Weld Heat Treatment Parameters for 9%Cr Heat Resistant Steel Welded Pipes [J]. Journal of Mechanical Engineering, 2025, 61(20): 113-122.
[6]	TANG Lei, ZENG Yida, GUO Zhenghua, LI Zhiyong, WANG Guangping, WANG Yan. Effect of Segmented Skip Welding on Deformation and Residual Stress of Engine Support [J]. Journal of Mechanical Engineering, 2025, 61(18): 138-150.
[7]	KANG Juntao, WEI Chaoxiao. Comparative Study of Multilayer Perceptron and Support Vector Machine Regression Algorithms for Predicting Inherent Strain in T-joints [J]. Journal of Mechanical Engineering, 2025, 61(18): 181-189.
[8]	LEI Linsen, LI Xiangwei, XING Shizhu, LIU Xiaochao, LI Yongzhe, PEI Xianjun. Unified Analysis Method for High/Low Cycle Fatigue Behavior of Welded Structures Based on Structural Strain Parameters [J]. Journal of Mechanical Engineering, 2025, 61(16): 102-115.
[9]	ZHANG Gang, KANG Zhi, MENG Xu, SHI Yu, FAN Ding. Mechanism of Power Modulated-galvanometer Scanning Laser Assisted-pulsed TIG Deep Penetration Welding [J]. Journal of Mechanical Engineering, 2025, 61(16): 157-165.
[10]	ZHU Ming, WENG Jun, ZHU Zhenwen, YANG Binhui, ZHANG Gang, SHI Yu. Design of a Narrow Gap Oscillating Hot Wire GTAW Seam Tracking System Based on Passive Vision [J]. Journal of Mechanical Engineering, 2025, 61(12): 164-172.
[11]	WANG Dada, XU Haitao, LIU Ping, JIN Xia, Lü Chuanyang, HE Yanming. Optimization of Residual Stress in AlN-Cu Brazing Joint Based on Heterogeneous Interlayer [J]. Journal of Mechanical Engineering, 2025, 61(8): 98-106.
[12]	SHAO Chendong, MA Jiangkun, HUANG Shuyu, LAN Ling, WU Guangming, LU Fenggui. Numerical Simulation on Laser Welding Deformation of Sandwich Structure with Curved Surface [J]. Journal of Mechanical Engineering, 2025, 61(6): 121-132.
[13]	XIE Yunfei, GE Shipeng, GUO Zhenguo, CHU Qiang, ZHANG Yong, LI Wenya. Microstructure Characteristics of Refill Friction Stir Spot Welded Multilayered Aluminum Foils Joint [J]. Journal of Mechanical Engineering, 2024, 60(18): 128-137.
[14]	LI Chunkai, DAI Yue, WANG Jiaxin, GU Yufen, SHI Yu. Detection and Characteristic Analysis of Weld Pool Oscillation Behavior in Pulsed Gas Metal Arc Welding [J]. Journal of Mechanical Engineering, 2024, 60(16): 141-150.
[15]	WANG Hao, LIU Kun, LI Jie, YU Wenming, WU Hong, OKULOV Artem. Research Progress on Solidification Cracking of Aluminum Alloy During Welding and Crack Resistance of Filler Materials [J]. Journal of Mechanical Engineering, 2024, 60(12): 207-219.

EFFECT OF Si ON CRACK RESISTANCE OF LASER CLAD LAYERS OF GREY IRON

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments