Simulation Analysis and Experimental Study on Chip Removal Conditions of Internal Chip Removal Bits for CFRP Machining

doi:10.3901/JME.2019.05.223

Abstract

Abstract: An Abstract:when drilling carbon fiber reinforced polymer (CFRP), the powder chip will be produced, and whether the chip can be removed in time will affect the service life of the tool, and the spread of chip has a great harm to the environment, processing equipment and operators. Aiming at the hole machining of carbon fiber composites in the chip can not achieve real-time recovery problems:A new type of drilling cuttings processing system - suction type chip system is put forward, which can effectively discharge swarf produced in hole machining, the realization of green processing. The aspirating internal chip removal system designed and manufactured is based on the CFD internal chip removal drill bit for CFRP drilling. Based on the study of CFRP chip properties and the minimum airflow speed required for system chip removal, based on the fluid simulation software Fluent, internal chip process fluid dynamics simulation drill are conducted. The simulation shows that:when the cutting speed of n=3 000 r/min and feed f=0.06 mm/r chip, the negative pressure is not less than P ≥ 9 kPa, the system can be generated when the chips in a timely and effective discharge; when the negative pressure chip P=9 kPa and feed f=0.06 mm/r, a bit speed is less than or equal to n ≤ 3 000 r/min, the system can be generated when the chips in a timely and effective discharge. Finally, a suction-type internal chip removal system test platform is built and manufacture chip removal tools in PCD to verify the correctness of the above simulation and theoretical calculations.

Key words: drill bit rotation speed, inner chip removing drill, negative pressure of chip removal, suction type internal chip removal system

CLC Number:

TG156

WANG Yiwen, XU Chengyang, XU Jiazhong, LIU Xianli. Simulation Analysis and Experimental Study on Chip Removal Conditions of Internal Chip Removal Bits for CFRP Machining[J]. Journal of Mechanical Engineering, 2019, 55(5): 223-231.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2019.05.223

http://www.cjmenet.com.cn/EN/Y2019/V55/I5/223

References

[1] 陈燕,葛恩德,傅玉灿,等.碳纤维增强树脂基复合材料制孔技术研究现状与展望[J]. 复合材料学报, 2015,32(2):301-316. CHEN Yan,GE Ende,FU Yucan,et al. Review and prospect of drilling technologies for carbon fiber reinforced polymer[J]. Acta Materiae Compositae Sinica,2015,32(2):301-316.
[2] CÉDRIC B,GÉRARD P,JOËL R,et al. CFRP drilling:Fundamental study of local feed force and consequences on hole exit damage[J]. International Journal of Machine Tools & Manufacture,2015,94:57-64.
[3] OZDEN I,ELAHEH G,et al. Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites[J]. Composite Structures,2016,105:126-133.
[4] 王奔,高航,郭东明,等. 树脂固化温度与纤维铺设方式对C/E复合材料制孔质量的影响[J]. 机械工程学报,2011,47(12):19-25. WANG Ben,GAO Hang,GUO Dongming,et al. Influence of resin cure temperature and fiber layup style on the drilling quality of C/E composites[J]. Journal of Mechanical Engineering,2011,47(12):19-25.
[5] LSBILIR O,GHASSEMIEH E. Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites[J]. Composite Structures,2013,105(8):126-133.
[6] 鲍永杰,高航,马海龙,等. 单向C/E复合材料磨削制孔温度场模型的研究[J]. 机械工程学报,2012,48(1):169-176. BAO Yongjie,GAO Hang,MA Hailong,et al. research unidirectional C/E drilling grinding temperature field model composite material[J] Journal of Mechanical Engineering,2012,48(1):169-176.
[7] ILIESCU D,GEHIN D,GUTIERREZ M E,et al. Modeling and tool wear in drilling of CFRP[J]. International Journal of Machine Tools & Manufacture,2010,(20):204-213.
[8] FEITO N,LÓPEZ P J,SANTIUSTE C,et al. Numerical prediction of delamination in CFRP drilling[J]. Composite Structures,2014108(1):677-683.
[9] TSAO C C,HOCHENG H. Taguchi analysis of delamination associated with various drill bits in drilling of composite material[J]. International Journal of Machine Tools & Manufacture,2004,44:1085-1090.
[10] LV Pinho,CAROU D. Comparative study of the performance of diamond-coated drills on the delamination in drilling of carbon fiber reinforced plastics:Assessing the influence of the temperature of the drill[J]. Journal of Composite Materials,2015,0(0):1-11.
[11] DHIRAJ K,SINGH K K. An approach towards damage free machining of CFRP and GFRP composite material:A review[J]. Advanced Composite Materials,2015,24:49-63.
[12] RAMULU M,BRANSON T,KIM D. A study on the drilling of composite and titanium stacks[J]. Composite Structures,2001,54(1):67-77.
[13] 孙智一,吴晓蓉. 计算流体力学数值模拟方法的探讨及应用[J]. 水利科技与经济,2008,14(2):126-128. SUN Zhiyi,WU Xiaorong. Discussion and application of CFD numerical simulation technology[J]. Water Conservancy S cience and Technology and Economy,2008,14(2),126-128.
[14] SOMMERFELD M,LAIN S. Parameters influencing dilutephase pneumatic conveying through pipe systems:A computational study by the Euler/Lagrange approach[J]. The Canadian Journal of Chemical Engineering,2015,93(1):1-17.
[15] RAJAN K S,SRIVASTAVA S N,PITCHUMANI B,et al. Simulation of gassolid heat transfer during pneumatic conveying:Use of multiple gas inlets along the duct[J]. International Communications in Heat & Mass Transfer,2006,33(10):1234-1242.
[16] DZIDO G,PALICA M,RACZEK J,et al. Investigations of the acceleration region in the vertical pneumatic conveying[J]. Powder Technology,2002,127(2):99-106.
[17] 张颉,张泽,胡永. 高浓度电除尘器入口封头气固两相流动的近流线数值模拟[J]. 化工学报,2004,55(9):1448-1454. ZHANG Jie,ZHANG Ze,HU Yong. Numerical flow simulation of gas-solid two-phase flow in inlet of high concentration electrostatic precipitator[J]. Acta Chimica Sinica,2004,55(9):1448-1454.
[18] 杨伦,谢一华. 气力输送工程[M]. 北京:机械工业出版社,2006. YANG Lun,XIE Yihua. Pneumatic conveying engineering[M]. Beijing:China Machine Press,2006.
[19] 朱旭东. 湍流模型的比较、改进和应用[D]. 南京:南京航空航天大学,2005. ZHU Xudong. Comparison,improvement and application of turbulence model[D]. Nanjing:Nanjing University of Aeronautics and Astronautics,2005.
[20] 薛冰军. 离心泵内部流场的数值模拟与试验分析[D]. 邯郸:河北工程大学,2012. XUE Bingjun. The numerical simulation and experimental analysis of inner flow field of centrifugal pump[D]. Handan:Hebei University of Engineering,2012.