Design and Analysis of a Delta-type Rocket Recovery Mechanism Based on an Annular Cushioning Moving Platform

doi:10.3901/JME.2025.21.168

Abstract

Abstract: To address the practical requirements for the recovery of heavy-lift launch vehicles, a Delta-type rocket recovery mechanism based on an annular cushioning moving platform is proposed. Utilizing the spatially symmetric three-dimensional motion characteristics of the Delta mechanism to achieve two-dimensional capturing motion in the horizontal plane and vertical lowering motion of the rocket. A single-degree-of-freedom annular moving platform is designed to enable energy absorption and cushioning during the instant of rocket capture. A novel kinematic pair embedded with a passive locking mechanism is introduced, allowing instantaneous switching between dynamic and static states of the drive, thereby blocking the transmission of impact loads to the actuator. The relationship between the driving workspace and structural dimensions of the proposed Delta-type rocket recovery mechanism, under the condition of meeting the capture workspace requirements, is investigated. The capture range and local stiffness performance of the mechanism are evaluated. An evaluation metric for the influence of the weight of the parallelogram linkage mechanism on the driving parameters is established. The driving characteristics of the Delta-type mechanism suitable for the recovery of hundred-ton-class rockets and the performance indicators of the cushioning mechanism for the annular moving platform are analyzed. The high-load, high-speed capture dynamic performance indicators, the design and metrics of the annular cushioning energy-absorbing moving platform, and the instantaneous switching mechanism of the kinematic pair constructed can provide technical support and reference for the future development of rocket recovery equipment based on parallel mechanisms or multi-link mechanisms.

Key words: reusable rocket, parallel mechanism, rocket recovery mechanism, cushioning mechanism, dynamics simulation

CLC Number:

TG156

XU Donglai, GUO Sheng, XU Xuelei, JIN Xiaodong, ZHAO Fuqun, SUN Zhenlian, YANG Weijie. Design and Analysis of a Delta-type Rocket Recovery Mechanism Based on an Annular Cushioning Moving Platform[J]. Journal of Mechanical Engineering, 2025, 61(21): 168-178.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2025.21.168

http://www.cjmenet.com.cn/EN/Y2025/V61/I21/168

References

[1] 沈祖炜. 可重复使用运载器K-1的回收系统设计概况[J]. 航天返回与遥感，2000，21(3)：6-11. SHEN Zuwei. Recovery system design of the K-1 reusable launch vehicle[J]. Spacecraft Recovery & Remote Sensing，2000，21(3)：6-11.
[2] 宋征宇，黄兵，汪小卫，等. 重复使用运载器回收技术现状与挑战[J]. 深空探测学报，2022，9(5)：457-469. SONG Zhengyu，HUANG Bing，WANG Xiaowei，et al. Status and challenges of reusable launch vehicle recovery technology[J]. Journal of Deep Space Exploration，2022，9(5)：457-469.
[3] 郑凯旋，龙云，汪彬，等. 海上垂直回收运载火箭发展现状与关键技术分析[J]. 上海航天，2024，41(2)：36-53. ZHENG Kaixuan，LONG Yun，WANG Bin，et al. Development status and key technology analysis of maritime vertical recovery launch vehicles[J]. Aerospace Shanghai，2024，41(2)：36-53.
[4] 王英诚，杨毅强，张瑞，等. 运载火箭垂直回收着陆系统[J]. 中国航天，2022(11)：15-19. WANG Yingcheng，YANG Yiqiang，ZHANG Rui，et al. The vertical recovery landing system of launch vehicle[J]. Aerospace China，2022(11)：15-19.
[5] 胡振兴，张希，宋征宇，等. 基于地面拦阻系统的火箭垂直着陆回收机构设计[J]. 深空探测学报，2022，9(5)：477-482. HU Zhenxing，ZHANG Xi，SONG Zhengyu，et al. A rocket vertical landing recovery mechanism based on a ground arresting scheme[J]. Journal of Deep Space Exploration，2022，9(5)：477-482.
[6] ZHANG H，ZHAO Z，REN G，et al. Arresting-cable system for robust terminal landing of reusable rockets[J]. Journal of Spacecraft and Rockets，2021，58(2)：425-443.
[7] 张欢，张成，宋晓东. 索式火箭回收着陆系统缓冲装置设计与分析[J]. 宇航学报，2022，43(9)：1152-1162. ZHANG Huan，ZHANG Cheng，SONG Xiaodong. Design and analysis of buffer device of cable system for reusable rocket recovery and landing[J]. Journal of Astronautics，2022，43(9)：1152-1162.
[8] 杨卫杰，黎定仕，许学雷，等. 一种火箭回收系统：中国，202211308874.4[P]. 2024-05-03. YANG Weijie，LI Dingshi，XU Xuelei，et al. A rocket recovery system：China，202211308874.4[P]. 2024-05-03.
[9] 黄真. 并联机器人及其机构学理论[J]. 燕山大学学报，1998，22(1)：13-17. HUANG Zhen. The parallel robot manipulator and its mechanism theory[J]. Journal of Yanshan University，1998，22(1)：13-17.
[10] ZHANG K，FANG Y，FANG H，et al. Geometry and constraint analysis of the three-spherical kinematic chain based parallel mechanism[J]. Journal of Mechanisms and Robotics，2010，2(3)：031014.
[11] BOURI M，CLAVEL R. The linear delta：Developments and applications[C]//ISR 2010(41st International Symposium on Robotics) and ROBOTIK 2010(6th German Conference on Robotics)，Munich，Germany：VDE，2010：1-8.
[12] TSAI L W，WALSH G C，STAMPER R E. Kinematics of a novel three DOF translational platform[C]//Proceedings of IEEE International Conference on Robotics and Automation，Minneapolis，MN，USA：IEEE，1996：3446-3451.
[13] 张续冲，张宪民，刘胜. 小型Delta机器人理论建模及抓取实验研究[J]. 机床与液压，2020，48(3)：5-8. ZHANG Xuchong，ZHANG Xianmin，LIU Sheng. Theoretical modeling and grasping experimental research of small delta robot[J]. Machine Tool & Hydraulics，2020，48(3)：5-8.
[14] BRINKER J，CORVES B，TAKEDA Y. Kinematic performance evaluation of high-speed Delta parallel robots based on motion/force transmission indices[J]. Mechanism and Machine Theory，2018，125：111-125.
[15] SHAHIDI S A，LOREN，M，EDDINE S C. et al. A survey on precision of redundantly actuated DELTA-type parallel kinematic mechanisms[C]//In 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)，Vancouver，BC，Canada：IEEE，2017：5376-5381.
[16] LI Y，SHANG D，LIU Y. Kinematic modeling and error analysis of Delta robot considering parallelism error[J]. International Journal of Advanced Robotic Systems，2019，16(5)：1729881419878927.
[17] MARTINI A，TRONCOSSI M，CARRICATO M. et al. Static balancing of a parallel kinematics machine with Linear-Delta architecture：Theory，design and numerical investigation[J]. Mechanism and Machine Theory，2015，90：128-141.
[18] KANSAL S，MUKHERJEE S. Vision-based kinematic analysis of the Delta robot for object catching[J]. Robotica，2022，40(6)：2010-2030.
[19] ASADI F，HEYDARI A. Analytical dynamic modeling of Delta robot with experimental verification[J]. Proceedings of the Institution of Mechanical Engineers，Part K：Journal of Multi-body Dynamics，2020，234(3)：623-630.
[20] JIANG Z，WANG Y，LIU D. et al. Calibration optimization of kinematics and dynamics for Delta robot driven by integrated joints in machining task[J]. In Actuators. MDPI，2024，13(6)：219.
[21] LI Y，HUANG T，CHETWYND D G. An approach for smooth trajectory planning of high-speed pick-and-place parallel robots using quintic B-splines[J]. Mechanism and Machine Theory，2018，126：479-490.
[22] MOUSTRIS G P，TZAFESTAS C S. Modelling and analysis of a parallel double delta mechanism for robotic surgery[C]//In 2022 30th Mediterranean Conference on Control and Automation (MED)，Vouliagmeni，Greece：IEEE，2022：861-866.
[23] MA J，SHEN Y，ZHANG S. et al. A new error compensation method for Delta robots combining geometric error modeling with spatial interpolating[J]. Journal of Mechanisms and Robotics，2024，16(5)：051012.
[24] ALVARES A J，GASCA E A R，JAIMES C I R. Development of the linear delta robot for additive manufacturing[C]//2018 5th International Conference on Control，Decision and Information Technologies (CoDIT)，Thessaloniki，Greece：IEEE，2018：187-192.
[25] 贾璞，李端玲，李海源，等. 基于变胞铰链的并联机构结构设计与构型分析[J]. 机械工程学报，2020，56(19)：92-102. JIA Pu，LI Duanling，LI Haiyuan，et al. Structural design and configuration analysis of parallel mechanism with metamorphic joint[J]. Journal of Mechanical Engineering，2020，56(19)：92-102.
[26] 杨毅，丁希仑. 基于空间多面体向心机构的伸展臂设计研究[J]. 机械工程学报，2011，47(5)：26-34. YANG Yi，DING Xilun. Design and analysis of mast based on spatial polyhedral linkages mechanism along radial axes[J]. Journal of Mechanical Engineering，2011，47(5)：26-34.
[27] ZHAO F，WU Y，YANG X. et al. Multimode design and analysis of an integrated leg-arm quadruped robot with deployable characteristics[J]. Chinese Journal of Mechanical Engineering，2024，37(1)：59.
[28] GOSSELIN C. Stiffness mapping for parallel manipulators[J]. IEEE transactions on Robotics and Automation，1990，6(3)：377-382.
[29] LI Y，ZHANG E，SONG Y，et al. Stiffness modeling and analysis of a novel 4-DOF PKM for manufacturing large components[J]. Chinese Journal of Aeronautics，2013，26(6)：1577-1585.
[30] YANG X，GUO S，WANG P. et al. Design and optimization analysis of an adaptive knee exoskeleton[J]. Chinese Journal of Mechanical Engineering，2024，37(1)：104.
[31] 冯国峰，杨毅强，胡小伟，等. "星舰"发射支持系统特点与分析[J]. 中国航天，2022，11(12)：31-34. FENG Guofeng，YANG Yiqiang，HU Xiaowei. et al. Characteristics and analysis of Starship’s launch support system[J]. Aerospace China，2022，11(12)：31-34.