CUTTING MECHANISM OF ABRASIVE WATER JET

Abstract

Abstract: Abrasive water jet (AWJ) cutting mechanism is studied. According to the interaction of jet and material on each other, AWJ cutting process model is formed and verified. Brought to light the interplay laws of typical materials cutting features (cutting depth, kerf width and strking capacity) and cutting variables (water pressure, target distance, cutting rate and so on) and the effects of abrasive and material. Achievement results has guiding significance and practical value for development and popularization of AWJ cutting technology.

Key words: Abrasive, Abrasive water jet cutting, Grinding Mechanism

CLC Number:

TG48

Song Yongzheng;Wen Xiaokang;Liang Zhiqiang. CUTTING MECHANISM OF ABRASIVE WATER JET[J]. , 1997, 33(3): 102-107.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1997/V33/I3/102

[1]	WANG Jun, JING Yanyan, DU Xinhao, ZHENG Lijuan, WANG Chengyong, CHEN Ping. Abrasive Waterjet Machining — State of the Art and Future Perspectives [J]. Journal of Mechanical Engineering, 2025, 61(9): 46-77.
[2]	WANG Ning, ZHU Xianhao, YAO Shulei, WU Qiuyu, PAN Fei, YU Hao, ZHANG Xiancheng, TU Shantung. Influence of Abrasive Waterjet Peening on Low Cycle Fatigue Performance of Inconel 690 Alloy [J]. Journal of Mechanical Engineering, 2025, 61(24): 63-74.
[3]	CHEN Zhaojie, XIE Jin, LIU Junhan, XIONG Changxin, LI Difan. Study on Impulse-discharge Driven Abrasive Flow Assisted Grinding of Monocrystalline SiC [J]. Journal of Mechanical Engineering, 2024, 60(9): 383-392.
[4]	FANG Congfu, LI Hongyang, SHEN Jianyun, WU Xian. Study on Intelligent Prediction of Surface Roughness Based on Integration of Abrasive Characteristics and Process Parameters [J]. Journal of Mechanical Engineering, 2024, 60(7): 224-235.
[5]	HE Qingshan, XIE Yongchen, CUI Zhongming, FU Yucan. Development of the Phase Change Heat Storage Composite Wheel for Green Grinding of Difficult-to-cut Materials [J]. Journal of Mechanical Engineering, 2024, 60(3): 405-414.
[6]	LI Shaochuan, XIAO Guijian, CAO Huajun, WANG Yingxin, ZHAO Zeyong, ZHUO Xiaoqin, HUANG Yun. Two-dimensional Ultrasound-assisted Belt Grinding Method Based on Phase Regulation and its Effect on the Surface Integrity of GH4169 [J]. Journal of Mechanical Engineering, 2024, 60(21): 349-364.
[7]	LIU Songyong, ZHOU Fangyue, SHINICHI W, GUO Chuwen, LI Hongsheng. Analysis of Cutting Performance of TBM Cutter Head Assisted by Abrasive Slurry Jet [J]. Journal of Mechanical Engineering, 2024, 60(15): 379-392.
[8]	WANG Cheng-jie, YU Shuang, BAI Chen-chao, YANG Chao-xu, ZHANG Hong-peng, WANG Shuai, SUN Yu-qing, LI Guo-bin. Research on a High Sensitivity Hydraulic Oil Contaminant Detection Sensor [J]. Journal of Mechanical Engineering, 2023, 59(8): 42-49.
[9]	ZHANG Yu, KANG Renke, GAO Shang, HUANG Jinxing, ZHU Xianglong. Development and Evaluation of Soft Abrasive Grinding Wheel for Silicon Wafer in Wet Mechanical Chemical Grinding [J]. Journal of Mechanical Engineering, 2023, 59(3): 328-336.
[10]	DUAN Jihao, AN Jiale, WU Zhuofan, HUAI Wenbo, GAO Feng. Contact Characteristics and Material Removal Mechanism of Abrasive Disc Grinding of Aero-engine Blade [J]. Journal of Mechanical Engineering, 2023, 59(17): 349-360.
[11]	WANG Long, WANG Liuying, TANG Xiujian, YANG Nengjun, LIU Gu, LI Ruoting, YOU Yinfeng. Construction and Analysis of Grinding Temperature Model for Gear Processed by Form Grinding Technology [J]. Journal of Mechanical Engineering, 2022, 58(3): 295-304.
[12]	WAN Liang, QIAN Yinan, TU Yixiang, DU Hang, WU Shijing, LI Deng. Prediction of the Profile Features of Titanium Alloy Milled by Abrasive Waterjet with a Single Pass [J]. Journal of Mechanical Engineering, 2022, 58(23): 296-305.
[13]	WANG Chengwu, DING Jinfu, YUAN Julong, XU Yongchao, ZHANG Kehua, LU Huizong, E Shiju, YAO Weifeng, WU Zhe, HE Xinsheng, WANG Huadong. Research on Uniformity Precise Finishing Process of Abrasive Grain Flow for Ellipse Inner Cavity Surface [J]. Journal of Mechanical Engineering, 2022, 58(19): 306-314.
[14]	XU Xipeng, HUANG Hui, HU Zhongwei, CUI Changcai, LUO Qiufa, LIAO Xinjiang. Development of Abrasive Tools: State-of-the-art and Prospectives [J]. Journal of Mechanical Engineering, 2022, 58(15): 2-20.
[15]	YE Qili, WANG Chengyong, LAI Zijian, DING Feng, WANG Jun. An Investigation into the Erosion Mechanisms of Zr-based Bulk Metallic Glasses by Loose Abrasives [J]. Journal of Mechanical Engineering, 2022, 58(15): 92-104.

CUTTING MECHANISM OF ABRASIVE WATER JET

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments