Development of Abrasive Tools: State-of-the-art and Prospectives

doi:10.3901/JME.2022.15.002

Abstract

Abstract: The rapid development of abrasive processing technology requires the improvement of abrasive tool fabrication technology.It is thus of great significance to develop high performance abrasive tools for improving production efficiency and processing accuracy.This review starts with the analyzing of failure forms of abrasive tools in machining process.The effects of force, temperature and chemical reaction at the contact interfaces between abrasive particles and workpiece on the failure mechanisms of abrasive tools are then analyzed under various machining conditions.Design and manufacturing technology of abrasive tools based on the manipulation of interfacial interactions are reviewed.Surface state measurement and evaluation techniques for abrasive tools are also reviewed.Techniques manipulating the interfacial interactions in abrasive tool applications are summarized.Combined with the development of intelligent abrasive processing technology, the future development of abrasive tools is prospected.

Key words: abrasive tools, force action, temperature action, chemical action

CLC Number:

TG74

XU Xipeng, HUANG Hui, HU Zhongwei, CUI Changcai, LUO Qiufa, LIAO Xinjiang. Development of Abrasive Tools: State-of-the-art and Prospectives[J]. Journal of Mechanical Engineering, 2022, 58(15): 2-20.

References

[1] OLIVEIRA J F G, SILVA E J, GUO C, et al. Industrial challenges in grinding[J]. CIRP Annals, 2009, 58(2):663-680.
[2] ZHU W, BEAUCAMP A. Compliant grinding and polishing:A review[J]. International Journal of Machine Tools and Manufacture, 2020, 158:103634.
[3] 邓朝晖, 刘战强, 张晓红.高速高效加工领域科学技术发展研究[J].机械工程学报, 2010, 46(23):106-120.DENG Zhaohui, LIU Zhanqiang, ZHANG Xiaohong.Esearch of the science and technology development in high-speed and efficient processing field[J]. Journal of Mechanical Engineering, 2010, 46(23):106-120.
[4] BRINKSMEIER E, MUTLUGüNES Y, KLOCKE F, et al. Ultra-precision grinding[J]. CIRP Annals, 2010, 59(2):652-671.
[5] HASHIMOTO F, YAMAGUCHI H, KRAJNIK P, et al.Abrasive fine-finishing technology[J]. CIRP Annals, 2016, 65(2):597-620.
[6] MALKIN S. Grinding technology:Theory and application of machining with abrasives[M]. New York:Industrial Press, 2008.
[7] MALKIN S, GUO C. Thermal analysis of grinding[J].CIRP Annals-Manufacturing Technology, 2007, 56(2):760-782.
[8] LINDSAY R P. The Effect of contact time on forces, wheel wear rate and G-ratio during internal and external grinding[J]. CIRP Annals, 1984, 33(1):193-197.
[9] TöNSHOFF HK, HILLMANN-APMANN H, ASCHE J.Diamond tools in stone and civil engineering industry:Cutting principles, wear and applications[J]. Diamond and Related Materials, 2002, 11(3):736-741.
[10] BULUT B, BAYDOGAN M, KAYALI ES. Effect of aluminium and silver addition on the wear characteristics of circular diamond saw blades for cutting Ankara andesite rocks[J]. Wear, 2021, 474-475:203867.
[11] XU Xipeng, LI Yuan, ZENG Weiming, et al. Quantitative analysis of the loads acting on the abrasive grits in the diamond sawing of granites[J]. Journal of Materials Processing Technology, 2002, 129(1-3):50-55.
[12] DING Wenfeng, ZHAO Biao, ZHANG Quanli, et al.Fabrication and wear characteristics of open-porous cBN abrasive wheels in grinding of Ti-6Al-4V alloys[J].Wear, 2021, 477:203786.
[13] 陈珍珍, 徐九华, 丁文锋, 等.多孔复合结合剂立方氮化硼砂轮磨损特性[J].机械工程学报, 2014, 50(17):201-207.CHEN Zhenzhen, XU Jiuhua, DING Wenfeng, et al. Wear behavior of porous composite-bonded cbn a brasive wheels[J]. Journal of Mechanical Engineering, 2014, 50(17):201-207.
[14] ZHAO Zhengcai, FU Yucan, XU Jiuhua, et al. Behavior and quantitative characterization of CBN wheel wear in high-speed grinding of nickel-based superalloy[J]. The International Journal of Advanced Manufacturing Technology, 2016, 87(9-12):3545-3555.
[15] KNOBLAUCH R, BOING D, WEINGAERTNER W L, et al. Investigation of the progressive wear of individual diamond grains in wire used to cut monocrystalline silicon[J]. Wear, 2018, 414:50-58.
[16] 温雪龙, 巩亚东, 程军, 等.电镀金刚石微磨具磨损机理分析与试验研究[J].机械工程学报, 2015, 51(11):177-185.WEN Xuelong, GONG Yadong, CHENG Jun, et al.Mechanism analysis and experimental research on wear of electroplated diamond micro-grinding tool[J]. Journal of Mechanical Engineering, 2015, 51(11):177-185.
[17] WANG Jingwei, YU Tianyu, DING Wenfeng, et al. Wear evolution and stress distribution of single CBN super abrasive grain in high-speed grinding[J]. Precision Engineering, 2018, 54:70-80.
[18] 陈建毅.钎焊金刚石砂轮高速磨削工程陶瓷的基础研究[D].厦门:华侨大学, 2009.CHEN Jianyi. Fundamental Research on high speed grinding of engineering ceramics with brazed diamond wheels[D]. Xiamen:Huaqiao University, 2009.
[19] HE Zhe, LI Jianyong, LIU Yueming, et al. Investigation on wear modes and mechanisms of abrasive belts in grinding of U71Mn steel[J]. The International Journal of Advanced Manufacturing Technology, 2018, 101(5-8):1821-1835.
[20] XU Xipeng, YU Yiqing, HUANG Hui. Mechanisms of abrasive wear in the grinding of titanium(TC4) and nickel(K417) alloys[J]. Wear, 2003, 255(7-12):1421-1426.
[21] LUO Qiufa, LU Jing, XU Xipeng. A comparative study on the material removal mechanisms of 6H-Si C polished by semi-fixed and fixed diamond abrasive tools[J]. Wear, 2016, 350-351:99-106.
[22] PETRICA M, KATSICH C, BADISCH E, et al. Study of abrasive wear phenomena in dry and slurry 3-body conditions[J]. Tribology International, 2013, 64:196-203.
[23] WU Haiyong, HUANG Hui, JIANG Feng, et al.Mechanical wear of different crystallographic orientations for single abrasive diamond scratching on Ta12W[J].International Journal of Refractory Metals and Hard Materials, 2016, 54:260-269.
[24] 李远.花岗石超大切深锯切机理与技术研究[D].厦门:华侨大学, 2004.LI Yuan. Mechanisms and techniques for deep sawing of granite[D]. Xiamen:Huaqiao University, 2004.
[25] MUKHOPADHYAY P, RAGHAVA SIMHAN D R, GHOSH A. Challenges in brazing large synthetic diamond grit by Ni-based filler alloy[J]. Journal of Materials Processing Technology, 2017, 250:390-400.
[26] LI Yuan, HUANG Hui, SHEN Jianyun, et al.Cost-effective machining of granite by reducing tribological interactions[J]. Journal of Materials Processing Technology, 2002, 129(1-3):389-394.
[27] 黄辉, 黄国钦, 郭桦, 等.锯切花岗石过程中金刚石串珠的磨损特性[J].机械工程学报, 2008, 44(8):112-117.HUANG Hui, HUANG Guoqin, GUO Hua, et al. Wear characteristics of diamond beads in wire sawing granite[J].Journal of Mechanical Engineering, 2008, 44(8):112-117.
[28] SUN Baojun, JIANG Chengjie, ZONG Fule. Performance and wear of brazing diamond grinding disc in machining gray cast iron[J]. Diamond and Related Materials, 2020, 106:107820.
[29] BUSHLYA V, LENRICK F, BJERKE A, et al. Tool wear mechanisms of PcBN in machining Inconel 718:Analysis across multiple length scale[J]. CIRP Annals, 2021, 70(1):73-78.
[30] 陈春晖, 陈哲, 刘一波, 等.改性酚醛树脂对树脂结合剂砂轮胎体性能的影响[J].金刚石与磨料磨具工程, 2020, 40(4):93-97.CHEN Chunhui, CHEN Zhe, LIU Yibo, et al. Effect of modified phenolic resin on performance of resin bond for super hard wheel[J]. Diamond&Abrasives Engineering, 2020, 40(4):93-97.
[31] 冯克明, 邢波, 师超钰, 等.树脂结合剂超硬磨料砂轮磨削稳定性试验研究[J].兵工学报, 2018, 39(7):1389-1396.FENG Keming, XING Bo, SHI Chaoyu, et al.Experimental study on grinding stability of super abrasive grinding wheel for resin bond[J]. Acta Armamentarii, 2018, 39(7):1389-1396.
[32] 徐西鹏, 刘娟, 于怡青, 等.凝胶结合剂磨粒工具制备及其磨抛性能研究[J].机械工程学报, 2013, 49(19):156-162.XU Xipeng, LIU Juan, YU Yiqing, et al. Fabrication and application of gel-bonded abrasive'tools for grinding and polishing tools[J]. Journal of Mechanical Engineering, 2013, 49(19):156-162.
[33] RAO Zhiwen, XIAO Guodong, ZHAO Biao, et al. Effect of wear behaviour of single mono-and poly-crystalline c BN grains on the grinding performance of Inconel 718[J].Ceramics International, 2021, 47(12):17049-17056.
[34] 阎秋生, 庄司克雄, 田中宪司.金属结合层包覆单列磨粒小直径CBN砂轮端面磨削过程研究[J].机械工程学报, 2005, 41(8):208-212.YAN Qiusheng, SYOJI K, TANAKA K. Studies on face grinding process of metal layer bond wrapped monorail grit cup CBN quill[J]. Journal of Mechanical Engineering, 2005, 41(8):208-212.
[35] CHEN Jiajia, FU Yucan, QIAN Ning, et al. A study on thermal performance of revolving heat pipe grinding wheel[J]. Applied Thermal Engineering, 2021, 182:116065.
[36] CHEN Zhenzhen, XU Jiuhua, DING Wenfeng, et al.Grinding temperature during high-efficiency grinding Inconel 718 using porous CBN wheel with multilayer defined grain distribution[J]. The International Journal of Advanced Manufacturing Technology, 2014, 77(1-4):165-172.
[37] JIANG Guo, ZHANG Jianguo, PAN Yanan, et al. A critical review on the chemical wear and wear suppression of diamond tools in diamond cutting of ferrous metals[J].International Journal of Extreme Manufacturing, 2020, 2(1):012001.
[38] FURUSHIRO N, TANAKA H, HIGUCHI M, et al.Suppression mechanism of tool wear by phosphorous addition in diamond turning of electroless nickel deposits[J]. CIRP Annals, 2010, 59(1):105-108.
[39] OLIVEIRA J F G, ALVES S M. Development of environmentally friendly fluid for cBN grinding[J]. CIRP Annals, 2006, 55(1):343-346.
[40] CHEN C C A, SHU L S, LEE S R. Mechano-chemical polishing of silicon wafers[J]. Journal of Materials Processing Technology, 2003, 140(1-3):373-378.
[41] HUANG H, WANG B L, WANG Y, et al. Characteristics of silicon substrates fabricated using nanogrinding and chemo-mechanical-grinding[J]. Materials Science and Engineering:A, 2008, 479(1-2):373-379.
[42] XU Yongchao, LU Jing, XU Xipeng. Study on planarization machining of sapphire wafer with soft-hard mixed abrasive through mechanical chemical polishing[J].Applied Surface Science, 2016, 389:713-720.
[43] JACKSON M J. Modelling of fracture wear in vitrified cBN grinding wheels[J]. Journal of Achievements in Materials&Manufacturing Engineering, 2007, 24(1):230-236.
[44] SUH C M, BAE K S, SUH M S. Wear behavior of diamond wheel for grinding optical connector ferrule-FEA and wear test-[J]. Journal of Mechanical Science and Technology, 2009, 22(11):2009-2015.
[45] DING Wenfeng, ZHU Yejun, XU Jiuhua, et al. Finite element investigation on the evolution of wear and stresses in brazed CBN grits during grinding[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(5-8):985-993.
[46] NOUARI M, IORDANOFF I. Effect of the third-body particles on the tool-chip contact and tool-wear behaviour during dry cutting of aeronautical titanium alloys[J]. Tribology International, 2007, 40(9):1351-1359.
[47] 张聪, 谭援强, 姜胜强, 等.金刚石锯片胎体与大理石摩擦磨损的离散元模拟研究[J].金刚石与磨料磨具工程, 2017, 37(4):15-21.ZHANG Cong, TAN Yuanqiang, JIANG Shengqiang, et al. Discrete element simulation study on the friction and wear between matrix of diamond saw blade and marble[J].Diamond&Abrasives Engineering, 2017, 37(4):15-21.
[48] 郭晓光, 郭东明, 康仁科, 等.单晶硅纳米级磨削过程中磨粒磨损的分子动力学仿真[J].半导体学报, 2008, 29(6):1180-1183.GUO Xiaoguang, GUO Dongming, KANG Renke, et al.Study of abrasive wear in monocrystal silicon grinding with molecular dynamic simulation[J]. Journal of Semiconductor, 2008, 29(6):1180-1183.
[49] FUNG K Y, TANG C Y, CHEUNG C F. Molecular dynamics analysis of the effect of surface flaws of diamond tools on tool wear in nanometric cutting[J].Computational Materials Science, 2017, 133:60-70.
[50] ZHOU Piao, SUN Tao, SHI Xunda, et al. Atomic-scale study of vacancy defects in SiC affecting on removal mechanisms during nano-abrasion process[J]. Tribology International, 2020, 145:106136.
[51] GOEL S, LUO Xichun, REUBEN R L. Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process[J]. Tribology International, 2013, 57:272-281.
[52] ZOU Lai, YIN Jiachao, HUANG Yun, et al. Essential causes for tool wear of single crystal diamond in ultra-precision cutting of ferrous metals[J]. Diamond and Related Materials, 2018, 86:29-40.
[53] FILLOT N, IORDANOFF I, BERTHIER Y. Modelling third body flows with a discrete element method-a tool for understanding wear with adhesive particles[J].Tribology International, 2007, 40(6):973-981.
[54] LI Haonan, YU Tianbiao, ZHU Lida, et al. Modeling and simulation of grinding wheel by discrete element method and experimental validation[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(9-12):1921-1938.
[55] YAMAZAKI T, SUZUMURA A. Relationship between X-ray diffraction and unidirectional solidification at interface between diamond and brazing filler metal[J].Journal of Materials Science, 2000, 35(24):6155-6160.
[56] HUANG Guoqin, HUANG Jierong, ZHANG Meiqin, et al. Fundamental aspects of ultrasonic assisted induction brazing of diamond onto 1045 steel[J]. Journal of Materials Processing Technology, 2018, 260:123-136.
[57] XIA Pei, JIANG Rongrong, LI Zhihong, et al. Effect of Y₂O₃ on the properties of vitrified bond and vitrified diamond composites[J]. Composites Part B:Engineering, 2014, 67:515-520.
[58] WANG Rui, ZHANG Jianhua, CHEN Shaoyun, et al.Green fabrication of graphene oxide/epoxy nanocomposite and its application in diamond abrasive tools[J]. Composites Part B:Engineering, 2019, 177:107383.
[59] SUNG JC, SUNG M. The brazing of diamond[J].International Journal of Refractory Metals and Hard Materials, 2009, 27(2):382-393.
[60] 李颖颖.铁基合金对金刚石的泡沫化腐蚀及应用研究[D].长沙:湖南大学, 2017.LI Yingying. Study on foaming corrosion and application of diamond by iron-based alloy powder[D]. Changsha:Hunan University, 2017.
[61] XU Xipeng, TIE Xiaorui, YU Yiqing. The effects of rare earth on the fracture properties of different metal-diamond composites[J]. Journal of Materials Processing Technology, 2007, 187:421-424.
[62] CHATTOPADHYAY A K, CHOLLET L, HINTERMANN H E. On performance of brazed bonded monolayer diamond grinding wheel[J]. CIRP Annals, 1991, 40(1):347-350.
[63] HINTERMANN H E, CHATTOPADHYAY A K. New generation super abrasive tool with monolayer configuration[J]. Diamond and Related Materials, 1992, 1(12):1131-1143.
[64] CHEN Jinchang, MU Dekui, LIAO Xinjiang, et al.Interfacial microstructure and mechanical properties of synthetic diamond brazed by Ni-Cr-P filler alloy[J].International Journal of Refractory Metals and Hard Materials, 2018, 74:52-60.
[65] KHALID F A, KLOTZ U E, ELSENER H R, et al. On the interfacial nanostructure of brazed diamond grits[J].Scripta Materialia, 2004, 50(8):1139-1143.
[66] HUANG S F, TSAI H L, LIN S T. Effects of brazing route and brazing alloy on the interfacial structure between diamond and bonding matrix[J]. Materials Chemistry and Physics, 2004, 84(2):251-258.
[67] ZHU W J, WANG J, LIU L B, et al. Modeling and simulation of the TiC reaction layer growth during active brazing of diamond using DICTRA[J]. Computational Materials Science, 2013, 78:74-82.
[68] MIAO Qing, DING Wenfeng, ZHU Yejun, et al. Brazing of CBN grains with Ag-Cu-Ti/TiX composite filler-The effect of TiX particles on microstructure and strength of bonding layer[J]. Materials&Design, 2016, 98:243-253.
[69] LIAO Xinjiang, MU Dekui, WANG Jianxin, et al.Formation of TiC via interface reaction between diamond grits and Sn-Ti alloys at relatively low temperatures[J].International Journal of Refractory Metals and Hard Materials, 2017, 66:252-257.
[70] DING Wenfeng, XU Jiuhua, SHEN Min, et al. Joining of CBN abrasive grains to medium carbon steel with AgCu/Ti powder mixture as active brazing alloy[J].Materials Science and Engineering:A, 2006, 430(1-2):301-306.
[71] ZHANG Jian, XU Qi, HU Yongle, et al. Interfacial bonding mechanism and adhesive transfer of brazed diamond with Ni-based filler alloy:First-principles and experimental perspective[J]. Carbon, 2019, 153:104-115.
[72] BURKHARD G, REHSTEINER F, SCHUMACHER B.High efficiency abrasive tool for honing[J]. CIRP Annals, 2002, 51(1):271-274.
[73] AURICH J C, HERZENSTIEL P, SUDERMANN H, et al. High-performance dry grinding using a grinding wheel with a defined grain pattern[J]. CIRP Annals, 2008, 57(1):357-362.
[74] YU Haiyue, LYU Yushan, WANG Jun, et al. A biomimetic engineered grinding wheel inspired by phyllotaxis theory[J]. Journal of Materials Processing Technology, 2018, 251:267-281.
[75] ZHANG Yuzhou, FANG Congfu, HUANG Guoqin, et al.Modeling and simulation of the distribution of undeformed chip thicknesses in surface grinding[J].International Journal of Machine Tools and Manufacture, 2018, 127:14-27.
[76] LI Haonan, AXINTE D. Textured grinding wheels:A review[J]. International Journal of Machine Tools and Manufacture, 2016, 109:8-35.
[77] DING Wenfeng, DAI Chenwei, YU Tianyu, et al.Grinding performance of textured monolayer CBN wheels:Undeformed chip thickness nonuniformity modeling and ground surface topography prediction[J].International Journal of Machine Tools and Manufacture, 2017, 122:52-66.
[78] LU Jing, LI Yang, XU Xipeng. The effects of abrasive yielding on the polishing of SiC wafers using a semi-fixed flexible pad[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2015, 229(1_suppl):170-177.
[79] 袁巨龙, 邵琦, 吕冰海, 等.基于流变原理的柔性接触抛光材料去除模型综述[J].机械工程学报, 2020, 56(3):169-180.YUAN Julong, SHAO Qi, LÜBinghai, et al. Review on material removal model of flexible contact polishing based on rheological principle[J]. Journal of Mechanical Engineering, 2020, 56(3):169-180.
[80] 李敏, 袁巨龙, 吴喆, 等.复杂曲面零件超精密加工方法的研究进展[J].机械工程学报, 2015, 51(5):178-191.LI Min, YUAN Julong, WU Zhe, et al. Progress in ultra-precision machining methods of complex curved parts[J]. Journal of Mechanical Engineering, 2015, 51(5):178-191.
[81] MALKIN S. Current trends in c BN grinding technology[J]. CIRP Annals, 1985, 34(2):557-563.
[82] FANG Congfu, YAN Zhen, DENG Wenwen, et al.Material removal in grinding sapphire wafers with brazeddiamond pellet plates[J]. Materials&Manufacturing Processes, 2019, 34(7):791-799.
[83] CHEN Jiajia, FU Yucan, LI Qilin, et al. Investigation on induction brazing of revolving heat pipe grinding wheel[J].Materials&Design, 2017, 116:21-30.
[84] QIAN Ning, FU Yucan, ZHANG Yuwen, et al.Experimental investigation of thermal performance of the oscillating heat pipe for the grinding wheel[J].International Journal of Heat and Mass Transfer, 2019, 136:911-923.
[85] 傅玉灿, 田霖, 徐九华, 等.磨削过程建模与仿真研究现状[J].机械工程学报, 2015, 51(7):197-205.FU Yucan, TIAN Lin, XU Jiuhua, et al. Development and application on the grinding process modeling and simulation[J]. Journal of Mechanical Engineering, 2015, 51(7):197-205.
[86] 彭锐涛, 刘开发, 黄晓芳, 等.流道结构对加压内冷却开槽砂轮磨削性能的影响[J].机械工程学报, 2019, 55(13):212-223.PENG Ruitao LIU Kaifa, HUANG Xiaofang, et al. Effect of flow channel structure on performance of pressurized internal-cooling slotted grinding wheels[J]. Journal of Mechanical Engineering, 2019, 55(13):212-223.
[87] DING Wenfeng, MIAO Qing, XU Jiuhua, et al.Preparation mechanism and grinding performance of single-layer self-lubrication brazed CBN abrasive wheels[J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(1-4):249-255.
[88] 吕涛, 黄水泉, 易芳, 等.液体润滑剂/β-环糊精包合物为填料的酚醛树脂砂轮自润滑性能研究[J].机械工程学报, 2017, 53(17):160-171.LÜTao, HUANG Shuiquan, YI Fang, et al.Self-lubrication performance of phenolic resin-bonded grinding wheel filled with inclusion complex of b-cyclodextrin and liquid lubricants[J]. Journal of Mechanical Engineering, 2017, 53(17):160-171.
[89] 任莹晖, 周家恒, 李伟, 等.化学机械磨削技术研究现状与展望[J].中国机械工程, 2021, 32(18):2143-2152.REN Yinghui, ZHOU Jiaheng, LI Wei, et al. Research status and prospect of chemo-mechanical grinding technology[J]. China Mechanical Engineering, 2021, 32(18):2143-2152.
[90] MENG Fanning, ZHANG Zhenyu, GAO Peili, et al.Design of composite abrasives and substrate materials for chemical mechanical polishing applications[J]. Applied Nanoscience, 2020, 10(5):1379-1393.
[91] 苏宏华, 徐鸿钧, 傅玉灿, 等.多层烧结超硬磨料工具现状综述与未来发展构想[J].机械工程学报, 2005, 41(3):12-17.SU Honghua, XU Hongjun, FU Yucan, et al. Review the current questions and strategies about multilayer sintering super abrasive tools and conceive the development of future tools[J]. Journal of Mechanical Engineering, 2005, 41(3):12-17.
[92] 宋健民.以渗透法硬焊的钻石研磨工具:中国, 98803985.0[P]. 2003-09-10.SONG Jianmin. Brazed diamond tools by infiltration:China, 98803985.0[P]. 2003-09-10.
[93] QIU Yanfei, HUANG Hui. Research on the fabrication and grinding performance of 3-dimensional controllable abrasive arrangement wheels[J]. The International Journal of Advanced Manufacturing Technology, 2019, 104(5-8):1839-1853.
[94] DEJA M, ZIELINSKI D, KADIR A Z A, et al.Applications of additively manufactured tools in abrasive machining-A literature review[J]. Materials(Basel), 2021, 14(5):1318.
[95] TANAKA T, ISONO Y. New development of a grinding wheel with resin cured by ultraviolet light[J]. Journal of Materials Processing Technology, 2001, 113(1):385-391.
[96] TIAN Chenchen, LI Xuekun, ZHANG Shubo, et al. Study on design and performance of metal-bonded diamond grinding wheels fabricated by selective laser melting(SLM)[J]. Materials&Design, 2018, 156:52-61.
[97] LI Xuekun, WANG Chao, TIAN Chenchen, et al. Digital design and performance evaluation of porous metal-bonded grinding wheels based on minimal surface and 3D printing[J]. Materials&Design, 2021, 203:109556.
[98] KEMPF F, DENKENA B, KROEDEL A, et al. Additive manufacturing of metal-bonded grinding tools[J]. The International Journal of Advanced Manufacturing Technology, 2020, 107(5-6):2387-2395.
[99] GAN Jie, GAO Hui, WEN Shifeng, et al. Simulation, forming process and mechanical property of Cu-Sn-Ti/diamond composites fabricated by selective laser melting[J]. International Journal of Refractory Metals and Hard Materials, 2020, 87:105144.
[100] SPIERINGS AB, LEINENBACH C, KENEL C, et al.Processing of metal-diamond-composites using selective laser melting[J]. Rapid Prototyping Journal, 2015, 21(2):130-136.
[101] PENG Yingbo, KONG Yi, ZHANG Wei, et al. Effect of diffusion barrier and interfacial strengthening on the interface behavior between high entropy alloy and diamond[J]. Journal of Alloys and Compounds, 2021, 852:157023
[102] YANG Zhibo, ZHANG Mingjun, ZHANG Zhen, et al.A study on diamond grinding wheels with regular grain distribution using additive manufacturing(AM) technology[J]. Materials&Design, 2016, 104:292-297.
[103] RAHMANI R, BROJAN M, ANTONOV M, et al.Perspectives of metal-diamond composites additive manufacturing using SLM-SPS and other techniques for increased wear-impact resistance[J]. International Journal of Refractory Metals and Hard Materials, 2020, 88:105192.
[104] WEGNER J, FEHR A, PLATT S, et al.Diamond-impregnated 316L metal matrix composites fabricated by powder bed fusion with laser beamInfluences of the energy input on the microstructural properties[J]. Diamond and Related Materials, 2020, 109:108040.
[105] DU Zhijun, ZHANG Fenglin, XU Qiongsheng, et al.Selective laser sintering and grinding performance of resin bond diamond grinding wheels with arrayed internal cooling holes[J]. Ceramics International, 2019, 45(16):20873-20881.
[106] QIU Yanfei, HUANG Hui, XU Xipeng. Effect of additive particles on the performance of ultraviolet-cured resin-bond grinding wheels fabricated using additive manufacturing technology[J]. The International Journal of Advanced Manufacturing Technology, 2018, 97(9-12):3873-3882.
[107] BENTLEY J L, WILLIAMS W B, PFAFF M. Additive manufacturing of tools for lapping glass[M].International Society for Optics and Photonics, 2013.
[108] GUO Lei, ZHANG Xinrong, CHEN Shibin, et al. An Experimental Study on the precision abrasive machining process of hard and brittle materials with ultraviolet-resin bond diamond abrasive tools[J].Materials(Basel), 2019, 12(1):125.
[109] TIAN Chenchen, LI Xueken, ZHANG Shubo, et al.Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting(SLM)[J]. The International Journal of Advanced Manufacturing Technology, 2018, 100(5-8):1451-1462.
[110] NGUYEN A T, BUTLER D L. Correlation of grinding wheel topography and grinding performance:A study from a viewpoint of three-dimensional surface characterisation[J]. Journal of Materials Processing Technology, 2008, 208(1-3):14-23.
[111] BLUNT L, EBDON S. The application of threedimensional surface measurement techniques to characterizing grinding wheel topography[J].International Journal of Machine Tools and Manufacture, 1996, 36(11):1207-1226.
[112] XIE J, XU J, TANG Y, et al. 3D graphical evaluation of micron-scale protrusion topography of diamond grinding wheel[J]. International Journal of Machine Tools and Manufacture, 2008, 48(11):1254-1260.
[113] 龚俊锋, 徐西鹏.基于聚焦合成的砂轮表面三维重构方法[J].金刚石与磨料磨具工程, 2006(4):14-26.GONG Junfeng, XU Xipeng. 3-D surface reconstruction of grinding wheel topography based on depth from focus[J]. Diamond&Abrasives Engineering, 2006(4):14-16.
[114] CUI Changcai, XU Xipeng, HUANG Hui, et al.Extraction of the grains topography from grinding wheels[J]. Measurement, 2013, 46(1):484-490.
[115] 霍凤伟, 郭东明, 金洙吉, 等.细粒度金刚石砂轮形貌测量与评价[J].机械工程学报, 2007, 43(10):108-113.HUO Fengwei, GUO Dongming, JIN Zhuji, et al.Measurement and evaluation of the surface topography of fine diamond grinding wheel[J]. Journal of Mechanical Engineering, 2007, 43(10):108-113.
[116] KIM SH, AHN JH. Decision of dressing interval and depth by the direct measurement of the grinding wheel surface[J]. Journal of Materials Processing Technology, 1999, 88(1):190-194.
[117] DARAFON A, WARKENTIN A, BAUER R.Characterization of grinding wheel topography using a white chromatic sensor[J]. International Journal of Machine Tools&Manufacture, 2013, 70:22-31.
[118] 崔长彩, 王克贤, 黄国钦, 等.单层钎焊金刚石砂轮表面磨粒全场快速测量[J].中国机械工程, 2019, 30(14):1639-1645.CUI Changcai, WANG Kexian, HUANG Guoqin, et al.Fast measurement of abrasive grains on a single layer brazed diamond grinding wheel surface[J]. China Mechanical Engineering, 2019, 30(14):1639-1645.
[119] CHEN Junying, CUI Changcai, HUANG Guoqin, et al.A new strategy for measuring the grain height uniformity of a grinding wheel[J]. Measurement, 2020, 151:107250.
[120] CHEN Junying, CUI Changcai, HUANG Guoqin, et al.Characterization of grain geometrical features for monolayer brazed grinding wheels based on grain cross-sections[J]. The International Journal of Advanced Manufacturing Technology, 2019, 105(1-4):1425-1436.
[121] KACALAK W, LIPIŃSKI D, SZAFRANIEC F, et al.Metrological basis for assessing the state of the active surface of abrasive tools based on parameters characterizing their machining potential[J].Measurement, 2020, 165:108068.
[122] FUJIMOTO M, ICHIDA Y. Micro fracture behavior of cutting edges in grinding using single crystal cBN grains[J]. Diamond and Related Materials, 2008, 17(7-10):1759-1763.
[123] YE Ruifang, JIANG Xiangqian, BLUNT Liam, et al.The application of 3D-motif analysis to characterize diamond grinding wheel topography[J]. Measurement, 2016, 77:73-79.
[124] DARIUSZ L, WOJCIECH K. Metrological aspects of abrasive tool active surface topography evaluation[J].Metrology&Measurement Systems, 2016, 23(4):567-577.
[125] PAGANI Lucai, QI Qunfen, LU Jing, et al..Characterisation of diamond abrasive grains of grinding tools using industrial X-ray computed tomography[J].The International Journal of Advanced Manufacturing Technology, 2021, 112(1):1-16.
[126] DAI Chenwei, DING Wengfeng, XU Jiuhua, et al.Effects of undeformed chip thickness on grinding temperature and burn-out in high-efficiency deep grinding of Inconel 718 superalloys[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(5-8):1841-1852.
[127] HUANG H, LIU Y C. Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding[J].International Journal of Machine Tools&Manufacture, 2003, 43(8):811-823.
[128] LAI Z, HU Z, FANG C, et al. Study on the wear characteristics of a lapping wheel in double-sided lapping based on the trajectory distribution[J]. IEEE Transactions on Semiconductor Manufacturing, 2019, 32(3):352-358.
[129] YANG Zhichao, ZHU Lida, ZHANG Guixiang, et al.Review of ultrasonic vibration-assisted machining in advanced materials[J]. International Journal of Machine Tools and Manufacture, 2020, 156:103594.
[130] YOU Kaiyuan, YAN Guangpeng, LUO Xichun, et al.Advances in laser assisted machining of hard and brittle materials[J]. Journal of Manufacturing Processes, 2020, 58:677-692.
[131] ZADAFIYA K, BANDHU D, KUMARI S, et al. Recent trends in non-traditional machining of shape memory alloys(SMAs):A review[J]. CIRP Journal of Manufacturing Science and Technology, 2021, 32(6):217-227.
[132] CHEN Yue, HU Zhongwei, JIN Jianfeng, et al.Molecular dynamics simulations of scratching characteristics in vibration-assisted nano-scratch of single-crystal silicon[J]. Applied Surface Science, 2021, 551:14945.
[133] YANG Zhicao, ZHU Lida, LIN Bin, et al. The grinding force modeling and experimental study of ZrO₂ ceramic materials in ultrasonic vibration assisted grinding[J].Ceramics International, 2019, 45(7, Part A):8873-8889.
[134] NI Jing, YANG Yongfeng, WU Can. Assessment of water-based fluids with additives in grinding disc cutting process[J]. Journal of Cleaner Production, 2019, 212:593-601.
[135] WU Wentao, LI Changhe, YANG Min, et al. Specific energy and g ratio of grinding cemented carbide under different cooling and lubrication conditions[J]. The International Journal of Advanced Manufacturing Technology, 2019, 105(1-4):67-82.
[136] ZHANG Yanbin, LI Changhe, JIA Dongzhou, et al.Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding[J]. International Journal of Machine Tools and Manufacture, 2015, 99:19-33.
[137] XU Yongchao, LU Jing, XU Xipeng, et al. Study on high efficient sapphire wafer processing by coupling SG-mechanical polishing and GLA-CMP[J].International Journal of Machine Tools and Manufacture, 2018, 130:12-19.
[138] DENG Hui, XU Zhou. Dressing methods of superabrasive grinding wheels:A review[J]. Journal of Manufacturing Processes, 2019, 45:46-69.
[139] 焦锋, 李成龙, 牛赢, 等.砂轮修整技术研究现状与展望[J].中国机械工程, 2021, 32(30):2435-2448.JIAO Feng, LI Chenglong, NIU Ying, et al. Review and prospect of grinding wheel dressing technique[J]. China Mechanical Engineering, 2021, 32(30):2435-2448.
[140] MUKHOPADHYAY M, KUNDU P K, CHATTERJEE S, et al. Impact of dressing infeed on SiC wheel for grinding Ti-6Al-4V[J]. Materials and Manufacturing Processes, 2018, 34(1):54-60.
[141] HOLESOVSKY F, PAN B, MORGAN M N, et al.Evaluation of diamond dressing effect on workpiece surface roughness by way of analysis of variance[J].Tehnicki vjesnik-Technical Gazette, 2018, 25(Supplement 1):165-169.
[142] DENG Hui, ZHOU Xu. Laser-dressing topography and quality of resin-bonded diamond grinding wheels[J].Optics and Lasers in Engineering, 2021, 136:106322.
[143] ZHANG CH, SHIN Y C. Wear of diamond dresser in laser assisted truing and dressing of vitrified CBN wheels[J]. International Journal of Machine Tools&Manufacture, 2003, 43(1):41-49.
[144] YANG Zhibo, ZHANG Shiyu, ZHANG Zhen, et al.Experimental research on laser-ultrasonic vibration synergic dressing of diamond wheel[J]. Journal of Materials Processing Technology, 2019, 269:182-189.
[145] XU M M, LI D D, HU D J, et al. Laminated manufacturing and milling electrical discharge dressing of metal-bonded diamond grinding wheels[J].Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2011, 226(1):137-144.
[146] 余剑武, 何利华, 黄帅, 等.电火花修整超硬磨料砂轮技术发展现状[J].中国机械工程, 2015, 16(16):2254-62.YU Jianwu, HE Lihua, HUANG Shuai, et al.State-of-the-art of electrical discharge dressing technology for super abrasive grinding wheel[J]. China Mechanical Engineering, 2015, 26(16):2254-2262.
[147] OHMORI H, NAKAGAWA T. Mirror surface grinding of silicon wafers with electrolytic in-process dressing[J].CIRP Annals, 1990, 39(1):329-332.
[148] MA Fei, HUANG Hui. Experimental research on the biological in-process dressing(BID) of Cu-Co matrix diamond tools[J]. Journal of Cleaner Production, 2020, 275:124070.