Intelligent Management and Control Technology of Cutting Tool Life-cycle for Intelligent Manufacturing

doi:10.3901/JME.2021.10.196

Abstract

Abstract: Intelligent manufacturing is the main direction of the future manufacturing industry, the high-end manufacturing equipments represented by aerospace and automobile fields are related to national defense security and national economic lifeline. The higher requirements for the management and control of cutting tools are put forward by complex and diversified machining of parts. As the most active and state-changing element in the cutting process, the performance of the tool directly affects the machining accuracy and productivity. The advent of the big data era has led to a change in the tool management paradigm, with manufacturers, suppliers and application companies demanding life-cycle data on tools. By analyzing the current situation of tool management and control, the design and manufacturing precision, the accuracy of life prediction and scientific tool management and control are issues that need to be addressed. The connotation and key technologies of the whole life-cycle intelligent management and control of tools are proposed, the research results of domestic and foreign scholars in tool design and manufacturing intelligent optimisation, tool cutting process condition monitoring and tool multi-source data management sharing are reviewed, and finally the future research directions are prospected in the light of the application of tool control technology. With the continuous deepening of intelligent manufacturing, the intelligent management and control of cutting tool life-cycle based on artificial intelligence, big data, digital twin, cloud computing and other modern information technology will certainly promote the transformation and upgrading of tool industry chain.

Key words: intelligent manufacturing, cutting tool, intelligent management and control, life-cycle, condition monitoring, big data

CLC Number:

TG506

LIU Xianli, LI Xuebing, DING Mingna, YUE Caixu, WANG Lihui, LIANG Yuesheng, ZHANG Bowen. Intelligent Management and Control Technology of Cutting Tool Life-cycle for Intelligent Manufacturing[J]. Journal of Mechanical Engineering, 2021, 57(10): 196-219.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2021.10.196

http://www.cjmenet.com.cn/EN/Y2021/V57/I10/196

References

[1] KANG H S,LEE J Y,CHOI S S,et al. Smart manufacturing:Pastresearch,present findings,and future directions[J]. International Journal of Precision Engineering and Manufacturing-Green Technology,2016,3(1):111-128.
[2] 中华人民共和国国务院. 国务院关于印发《"十三五"国家科技创新规划》[EB/OL].[2016-08-08]. http://www.gov.cn. State Council of the People's Republic of China. The national science and technology innovation plan for the 13th five year plan of the state council[EB/OL].[2016-08-08]. http://www.gov.cn.
[3] 刘强. 智能制造理论体系架构研究[J]. 中国机械工程,2020,31(1):24-36. LIU Qiang. Study on architecture of intelligent manufacturing theory[J]. China Mechanical Engineering,2020,31(1):24-36.
[4] CORONADO P D U,LYNN R,LOUHICHI W,et al. Part data integration in the shop floor digital twin:Mobile and cloud technologies to enable a manufacturing execution system[J]. Journal of manufacturing systems,2018,48:25-33.
[5] LIU Yongkui,WANG Lihui,WANG X V,et al. Scheduling in cloud manufacturing:State-of-the-art and research challenges[J]. International Journal of Production Research,2019,57(15-16):4854-4879.
[6] LIU Xianli,FAN Mengchao,JI Wei,et al. Research on models of design and NC manufacturing for ellipsoid end mill[J]. International Journal of Advanced Manufacturing Technology,2015,85(9-12):2729-2744.
[7] 岳彩旭,李录彬,计伟,等. 基于磨制精度的环形铣刀刃线几何模型[J]. 南京航空航天大学学报,2016,48(1):93-97. YUE Caixu,LI Lubin,JI Wei,et al. Cutting edge geometric model of ring milling tool based on grinding precision[J]. Transactions of Nanjing University of Aeronautics & Astronautics,2016,48(1):93-97.
[8] 陈涛,王道源,李素燕,等. 渐变倒棱PCBN刀具设计制造及磨削精度检测[J]. 机械工程学报,2018,54(11):214-221. CHEN Tao,WANG Daoyuan,LI Suyan,et al. Design,manufacture and grinding accuracy detection of PCBN tools with variable chamfer edge[J]. Journal of Mechanical Engineering,2018,54(11):214-221.
[9] 苏翔. 复杂型线铣刀数字化设计及铣削力预测研究[D]. 济南:山东大学,2016. SU Xiang. Research on digital design and force prediction for complex profile milling cutter[D]. Jinan:Shandong University,2016.
[10] ABELE E,FUJARA M. Simulation-based twist drill design and geometry optimization[J]. Cirp Annals Manufacturing Technology,2010,59(1):145-150.
[11] LI Anhai,ZHAO Jun,PEI Zhiqiang,et al. Simulation-based solid carbide end mill design and geometry optimization[J]. The International Journal of Advanced Manufacturing Technology,2014,71(9-12):1889-1900.
[12] KUMAR V,EAKAMBARAM A,ARIVAZHAGAN A. FEM analysis to optimally design end mill cutters for milling of Ti-6Al-4V[J]. Procedia Engineering,2014(97):1237-1246.
[13] WANG Yang,SU Honghua,DAI Jianbo,et al. A novel finite element method for the wear analysis of cemented carbide tool during high speed cutting Ti6Al4V process[J]. International Journal of Advanced Manufacturing Technology,2019,103(2):2795-2807.
[14] DAI Xing,ZHUANG Kejia,Ding Han. A systemic investigation of tool edge geometries and cutting parameters on cutting forces in turning of Inconel 718[J]. International Journal of Advanced Manufacturing Technology,2019,105(1-4):531-543.
[15] ZHAO Zemin,LIU Xianli,YUE Caixu,et al. Time-varying analytical model of ball-end milling tool wear in surface milling[J]. International Journal of Advanced Manufacturing Technology,2020,108(3):1109-1123.
[16] 刘献礼,计伟,范梦超,等. 基于特征的刀具"形-性-用"一体化设计方法[J]. 机械工程学报,2016,52(11):146-153. LIU Xianli,JI Wei,FAN Mengchao,et al. Feature based cutting tool "shape-performance-application" integrating design approach[J]. Journal of Mechanical Engineering,2016,52(11):146-153.
[17] JI Wei,ZHAO Zemin,LIU Xianli. A GA-based optimization algorithm for cutting tool "shape-performance-application" integrated design approach[J]. Procedia Cirp,2016,56:90-94.
[18] CHENG Kai,NIU Zhichao,WANG R C,et al. Smart cutting tools and smart machining:Development approaches,and their implementation and application perspectives[J]. Chinese Journal of Mechanical Engineering,2017,5(30):1162-1176.
[19] SHU Shengrong,DING Hui,et al. Thermal design and analysis of an internally cooled smart cutting tool and its implementation perspectives[J]. Materials Science Forum, 2014,770:120-125.
[20] WANG Chao,CHENG Kai,CHEN Xun,et al. Design of an instrumented smart cutting tool and its implementation and application perspectives[J]. Smart Materials and Structures,2014,23(3):035019.
[21] XIAO Caiwei,DING Hui,CHENG Kai,et al. Design of an innovative smart turning tool with application to real-time cutting force measurement[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture,2014,229(3):563-568.
[22] GRIEVES M. Digital twin:Manufacturing excellent through virtual factory replication[J]. Digital Twin White Paper,2014,5:1-7.
[23] 陶飞,刘蔚然,刘检华,等. 数字孪生及其应用探索[J]. 计算集成制造系统,2018,24(1):1-18. TAO Fei,LIU Weiran,LIU Jianhua,et al. Digital twin and its potential application exploration[J]. Computer Integrated Manufacturing Systems,2018,24(1):1-18.
[24] TAO Fei,ZHANG He,LIU Ang,et al. Digital twin in industry:State-of-the-Art[J]. IEEE Transactions on Industrial Informatics,2019,15(4):2405-2415.
[25] 易扬,刘晓军,冯锦丹,等. 面向数字孪生的产品表面模型表达与生成方法[J]. 计算集成制造系统,2019,25(6):1454-1462. YI Yang,LIU Xiaojun,FENG Jindan,et al. Representation and generation method of digital twin-oriented product skin model[J]. Computer Integrated Manufacturing Systems,2019,25(6):1454-1462.
[26] BOTKINA D,HEDLIND M,OLSSON B,et al. Digital twin of a cutting tool[J]. Procedia Cirp,2018,72:215-218.
[27] TONG Xin,LIU Qiang,PI Shiwei,et al. Real-time machining data application and service based on IMT digital twin[J]. Journal of Intelligent Manufacturing,2019,2:1-20.
[28] 孙惠斌,潘军林,张纪铎,等. 面向切削过程的刀具数字孪生模型[J]. 计算机集成制造系统,2019,25(6):1474-1480. SUN Huibin,PAN Junlin,ZHANG Jiduo,et al. Digital twin model for cutting tools in machining process[J]. Computer Integrated Manufacturing Systems,2019,25(6):1474-1480.
[29] 朱宇,李海宁,曹志涛,等. 数字孪生在航空发动机制造工艺中的应用探索[J]. 航空动力,2019(4):16. ZHU Yu,LI Haining,CAO Zhitao,et al. The application of digital twin in manufacturing process of aero engine[J]. Aerospace Power,2019(4):16.
[30] CAGGIANO A. Tool wear prediction in Ti-6Al-4V machining through multiple sensor monitoring and PCA features pattern recognition[J]. Sensors,2018,18(3):823.
[31] LIU C,WANG G F,LI Z M. Incremental learning for online tool condition monitoring using Ellipsoid ARTMAP network model[J]. Applied Soft Computing,2015,35:186-198.
[32] KOTHURU A,NOOKA S P,LIU R. Application of audible sound signals for tool wear monitoring using machine learning techniques in end milling[J]. The International Journal of Advanced Manufacturing Technology,2018,95(9-12):3797-3808.
[33] WU Jun,SU Yongheng,CHENG Yiwei,et al. Multi-sensor information fusion for remaining useful life prediction of machining tools by adaptive network based fuzzy inference system[J]. Applied Soft Computing,2018,68:13-23.
[34] BENKEDJOUH T,ZERHOUNI N,RECHAK S. Tool wear condition monitoring based on continuous wavelet transform and blind source separation[J]. The International Journal of Advanced Manufacturing Technology,2018,97(9-12):3311-3323.
[35] GHOSH N,RAVI Y B,PATRA A,et al. Estimation of tool wear during CNC milling using neural network-based sensor fusion[J]. Mechanical Systems and Signal Processing,2007,21(1):466-479.
[36] DUTTA S,PAL S K,MUKHOPADHYAY S,et al. Application of digital image processing in tool condition monitoring:A review[J]. CIRP Journal of Manufacturing Science and Technology,2013,6(3):212-232.
[37] MIKOŁAJCZYK T,NOWICKI K,KŁODOWSKI A,et al. Neural network approach for automatic image analysis of cutting edge wear[J]. Mechanical Systems and Signal Processing,2017,88:100-110.
[38] ZHU Kunpeng,YU Xiaolong. The monitoring of micro milling tool wear conditions by wear area estimation[J]. Mechanical Systems and Signal Processing,2017,93:80-91.
[39] DORIANA M D A,ULLAH A M M S,MATARAZZO D. Tool-wear prediction and pattern-recognition using artificial neural network and DNA-based computing[J]. Journal of Intelligent Manufacturing,2017,28(6):1285-1301.
[40] DUTTA S,PAL S K,SEN R. On-machine tool prediction of flank wear from machined surface images using texture analyses and support vector regression[J]. Precision Engineering,2016,43:34-42.
[41] BHAT N N,DUTTA S,VASHISTH T,et al. Tool condition monitoring by SVM classification of machined surface images in turning[J]. The International Journal of Advanced Manufacturing Technology,2016,83(9-12):1487-1502.
[42] LI Lihong,AN Qingbin. An in-depth study of tool wear monitoring technique based on image segmentation and texture analysis[J]. Measurement,2016,79:44-52.
[43] ANTIĆ A,POPOVIĆ B,KRSTANOVIĆ L,et al. Novel texture-based descriptors for tool wear condition monitoring[J]. Mechanical Systems and Signal Processing,2018,98:1-15.
[44] MART-ARELLANO G,TERRAZAS G,RATCHEV S. Tool wear classification using time series imaging and deep learning[J]. The International Journal of Advanced Manufacturing Technology,2019,104(9-12):3647-3662.
[45] WANG Guofeng,YANG Yinwei,GUO Zhiwei. Hybrid learning based Gaussian ARTMAP network for tool condition monitoring using selected force harmonic features[J]. Sensors and Actuators A:Physical,2013,203:394-404.
[46] WANG Guofeng,YANG Yinwei,ZHANG Y C,et al. Vibration sensor based tool condition monitoring using ν support vector machine and locality preserving projection[J]. Sensors and Actuators A:Physical,2014,209:24-32.
[47] WANG Guofeng,YANG Yinwei,LI Zhimeng. Force sensor based tool condition monitoring using a heterogeneous ensemble learning model[J]. Sensors,2014,14(11):21588-21602.
[48] KANNATEY-ASIBU E,YUM J,KIM T H. Monitoring tool wear using classifier fusion[J]. Mechanical Systems and Signal Processing,2017,85:651-661.
[49] LIU Changqing,LI Yingguang,HUA Jiaqi,et al. Real-time cutting tool state recognition approach based on machining features in NC machining process of complex structural parts[J]. The International Journal of Advanced Manufacturing Technology,2018,97(1-4):229-241.
[50] ZHU Kunpeng,MEI Tao,YE Dongsen. Online Condition Monitoring in Micromilling:A force waveform shape analysis approach[J]. Industrial Electronics,IEEE Transactions on,2015,62(6):3806-3813.
[51] RAMIREZ-NUNEZ J A,TREJO-HERNANDEZ M,ROMERO-TRONCOSO R J,et al. Smart-sensor for tool-breakage detection in milling process under dry and wet conditions based on infrared thermography[J]. The International Journal of Advanced Manufacturing Technology,2018,97(5-8):1753-1765.
[52] RATAVA J,LOHTANDER M,VARIS J. Tool condition monitoring in interrupted cutting with acceleration sensors[J]. Robotics and Computer-Integrated Manufacturing,2017,47:70-75.
[53] AKBARI A,DANESH M,KHALILI K. A method based on spindle motor current harmonic distortion measurements for tool wear monitoring[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering,2017,39(12):5049-5055.
[54] HEINEMANN R,HINDUJA S. A new strategy for tool condition monitoring of small diameter twist drills in deep-hole drilling[J]. International Journal of Machine Tools and Manufacture,2012,52(1):69-76.
[55] ZHU Kunpeng,ZHANG Yu. A generic tool wear model and its application to force modeling and wear monitoring in high speed milling[J]. Mechanical Systems and Signal Processing,2019,115:147-161.
[56] KONG Dongdong,CHEN Yongjie,LI Ning. Gaussian process regression for tool wear prediction[J]. Mechanical Systems and Signal Processing,2018,104:556-574.
[57] GERAMIFARD O,XU J X,ZHOU J H,et al. A physically segmented hidden markov model approach for continuous tool condition monitoring:Diagnostics and prognostics[J]. IEEE Transactions on Industrial Informatics,2012,8(4):964-973.
[58] YU Jinsong,LIANG Shuang,TANG Diyin,et al. A weighted hidden Markov model approach for continuous-state tool wear monitoring and tool life prediction[J]. The International Journal of Advanced Manufacturing Technology,2017,91(1-4):201-211.
[59] ARAMESH M,SHABAN Y,YACOUT S,et al. Survival life analysis applied to tool life estimation with variable cutting conditions when machining titanium metal matrix composites (Ti-MMCs)[J]. Machining Science and Technology,2016,20(1):132-147.
[60] YU Jianbo. Tool condition prognostics using logistic regression with penalization and manifold regularization[J]. Applied Soft Computing,2018,64:454-467.
[61] JAVED K,GOURIVEAU R,LI Xiang,et al. Tool wear monitoring and prognostics challenges:A comparison of connectionist methods toward an adaptive ensemble model[J]. Journal of Intelligent Manufacturing,2018, 29(8):1873-1890.
[62] 王强,李迎光,郝小忠,等. 基于在线学习的数控加工刀具寿命动态预测方法[J]. 航空制造技术,2019,62(7):49-53. WANG Qiang,LI Yingguang,HAO Xiaozhong,et al. Dynamic prediction method of cutting tool life in nc machining based on online learning[J]. Aeronautical Manufacturing Technology,2019,62(7):49-53.
[63] 曹大理,孙惠斌,张纪铎,等. 基于卷积神经网络的刀具磨损在线监测[J]. 计算机集成制造系统,2020,26(1):74-80. CAO Dali,SUN Huibin,ZHANG Jiduo,et al. In-process tool condition monitoring based on convolution neutral network[J]. Computer Integrated Manufacturing Systems,2020,26(1):74-80.
[64] SUN Huibin,CAO Dali,ZHAO Zidong,et al. A hybrid approach to cutting tool remaining useful life prediction based on the Wiener process[J]. IEEE Transactions on Reliability,2018,67(3):1294-1303.
[65] HANACHI H,YU Wennian,KIM I Y,et al. Hybrid data-driven physics-based model fusion framework for tool wear prediction[J]. The International Journal of Advanced Manufacturing Technology,2019,101(9-12):2861-2872.
[66] LETOT C,SERRA R,DOSSEVI M,et al. Cutting tools reliability and residual life prediction from degradation indicators in turning process[J]. The International Journal of Advanced Manufacturing Technology,2016,86(1-4):495-506.
[67] PEARN W L,HSU Y C. Optimal tool replacement for processes with low fraction defective[J]. European Journal of Operational Research,2007,180(3):1116-1129.
[68] HSU B M,SHU M H. Reliability assessment and replacement for machine tools under wear deterioration[J]. The International Journal of Advanced Manufacturing Technology,2010,48(1-4):355-365.
[69] DENG Y,ZHU H,ZHANG G,et al. Optimal tool replacement decision method based on cost and process capability[M]//ZHANG Tianbiao:Mechanical Engineering and Technology. Berlin:Springer,2012.
[70] JAIN A K,LAD B K. A novel integrated tool condition monitoring system[J]. Journal of Intelligent Manufacturing,2019,30(3):1423-1436.
[71] 曹乐,徐卫刚,黎厚松,等.一种面向自动生产线的刀具更换决策方法[J]. 机械工程学报,2014,50(9):131-135. CAO Le,XU Weigang,LI Housong,et al. Tool replacement decision-making method for automatic production line[J]. Journal of Mechanical Engineering,2014,50(9):131-135.
[72] 徐卫刚. 变速箱齿轮自动生产线的刀具更换决策方法研究[D]. 重庆:重庆大学,2016. XU Weigang. Study on tool replacement decision methodfor gear automatic production line of gearbox[D]. Chongqing:Chongqing University,2016.
[73] KUSIAK A. Smart manufacturing must embrace big data[J]. Nature,2017,544(7648):23-25.
[74] 国际金属加工网. 瓦尔特:点击按钮即可找到刀具[EB/OL].[2018-12-19].https://www.mmsonline.com. MMSonline.com.cn. Walter:Click the button to find the tool[EB/OL].[2018-12-19]. https://www.mmsonline.com.
[75] 王苏安. 面向全寿命周期管理的刀具直接标识与信息追踪技术研究[D]. 西安:西北工业大学,2007. WANG Suan. Research on tool direct marking and information tracking faced to life-cycle management[D]. Xi'an:Northwestern Polytechnical University,2007.
[76] 解志锋,张维,雷蕾,等. 零件表面激光直接标刻二维条码的工艺参数优化研究[J]. 中国机械工程,2011,22(5):592-596. XIE Zhifeng,ZHANG Wei,LEI Lei,et al. Optimization of laser marking process parameters on 2D barcode in part surface[J]. China Mechanical Engineering,2011,22(5):592-596.
[77] 房欣欣,李建美,路长厚,等. 金属表面Data Matrix条码高光区域的信息重构[J]. 计算机工程与应用,2016,52(16):205-209. FANG Xinxin,LI Jianmei,LU Changhou,et al. Highlight area reconstruction of Data Matrix barcodes marked onmetal surface[J]. Computer Engineering and Applications,2016,52(16):205-209.
[78] LI Jinrui,WANG Aiqun,LI Jianmei,et al. An adaptive image binarization method for laser direct marking data matrix symbols on metal surface[J]. Applied Mechanics and Materials,2013,401:1319-1323.
[79] LEI Lei,HE Weiping,ZHANG Wei. distortion correction of data matrix symbol directly marked on cylinder surface[C]//2010 International Conference on Artificial Intelligence and Computational Intelligence, 2010, October 23-24, Sanya, China. IEEE,2010,2:225-229.
[80] 王佳婧. 复杂环境下刀具DPM码识别技术研究[D]. 西安:西北工业大学,2014. WANG Jiajing. Research on cutter DPM code recognition in complex environment[D]. Xi'an:Northwestern Polytechnical University,2014.
[81] ZHANG Yingfeng,JIANG Pingyu,HUANG G,et al. RFID-enabled real-time manufacturing information tracking infrastructure for extended enterprises[J]. Journal of Intelligent Manufacturing,2012,23(6):2357-2366.
[82] WANG Guoxin,NAKAJIMA H,YAN Yan,et al. A methodology of tool lifecycle management and control based on RFID[C]//2009 IEEE International Conference on Industrial Engineering and Engineering Management, 2009, December 8-11, Hong Kong, China. IEEE,2009:1920-1924.
[83] 朱思征,王山山,敖丽娜,等. 大数据环境下刀具仓储与采购智能协同研究[J]. 软件,2016,37(2):29-32. ZHU Sizheng,WANG Shanshan,AO Lina,et al. Research on intelligent collaborative of tool storage and purchase in big data environment[J]. Computer Engineering and Software,2016,37(2):29-32.
[84] 计红章. A数控车间刀具需求预测及库存管理研究[D]. 上海:上海交通大学,2017. JI Hongzhang. Study on tool safety stock management of a numerical control workshop[D]. Shanghai:Shanghai Jiao Tong University,2017.
[85] 方超,周炳海. 机加工企业刀具库存分类方法研究[J]. 精密制造与自动化,2016(4):14-17. FANG Chao,ZHOU Binghai. Research on tool inventory classification in machining enterprises[J]. Precise Manufacturing and Automation,2016(4):14-17.
[86] 舒海生. 柔性制造系统工件流和刀具流动态调度的研究[D]. 哈尔滨:哈尔滨工程大学,2005. SHU Haisheng. Research on dynamic scheduling of part flow and tool flow in FMS[D]. Harbin:Harbin Engineering University,2005.
[87] 刘丰文. 刀具全生命周期信息管理技术研究[D]. 大连:大连理工大学,2015. LIU Fengwen. Research on information management technique in cutting tool life-cycle[D]. Dalian:Dalian University of Technology,2015.
[88] 朱睿. 刀具智能管理及优化调度技术研究[D]. 重庆:重庆大学,2014. ZHU Rui. Research of tool intelligent management and optimum scheduling technology[D]. Chongqing:Chongqing University,2014.
[89] 叶开. 基于MTO的刀具寿命预测与优化调度的智能管理系统及应用研究[D]. 合肥:合肥工业大学,2019. YE Kai. Research on intelligent management system and application of tool life prediction and optimal scheduling based on MTO[D]. Hefei:Hefei University of Technology,2019.
[90] BRENNER D,KLEINERT F,IMIELA J,et al. Life cycle management of cutting tools:Comprehensive acquisition and aggregation of tool life data[J]. Procedia CIRP,2017,61(1):311-316.
[91] WANG Rui,ZHAO Wu,LUO Cunjing,et al. An intelligent tool selection system based on CRB and RBR[J]. The Open Mechanical Engineering Journal,2014,8(1):795-802.
[92] 刘会刚,王建军,姜建芳,等. 智能制造刀具管理系统数据库的设计与实现[J]. 工具技术,2018(6):29. LIU Huigang,WANG Jianjun,JIANG Jianfang,et al. Design and implementation of intelligent manufacturing tool management system database[J]. Tool Engineering,2018(6):29.
[93] WANG Zhao,JIAO Li,YAN Pei,et al. Research and development of intelligent cutting database cloud platform system[J]. The International Journal of Advanced Manufacturing Technology,2018,94(9-12):3131-3143.
[94] 李尧,刘强,张伟. 面向制造服务的数控切削数据库系统[J]. 计算机集成制造系统,2014,20(9):2221-2230. LI Yao,LIU Qiang,ZHANG Wei. CNC cutting database system for service-oriented manufacturing[J]. Computer Integrated Manufacturing Systems,2014,20(9):2221-2230.
[95] 王建军,刘会刚. 智能制造刀具管理系统设计与实现[J]. 拖拉机与农用运输车,2019(1):15. WANG Jianjun,LIU Huigang. Design and implementation of intelligent manufacturing tool management system[J]. Tractor and Farm Transporter,2019(1):15.
[96] 霍亭宇. 云制造环境下刀具资源优化配置与服务应用研究[D]. 哈尔滨:哈尔滨理工大学,2017. HUO Tingyu. Study on optimal allocation and service application of cutting tool resources under cloud manufacturing environment[D]. Harbin:Harbin University of Science and Technology,2017.
[97] CORONADO P D U,LYNN R,LOUHICHI W,et al. Part data integration in the shop floor digital twin:Mobile and cloud technologies to enable a manufacturing execution system[J]. Journal of Manufacturing Systems,2018,48:25-33.