Reliability Assessment Method of Remanufacturing Process for Machine Tools Based on GO Method

doi:10.3901/JME.2017.11.203

Abstract

Abstract:

Stability and reliability of remanufacturing process are foundation to enhance the reliability of remanufactured machine tools. Remanufacturing processes including machine tools recycling, disassembly, cleaning, inspection and sorting, reconditioning, reassembly as well as debugging and testing of remanufactured machine tools have great influence on the reliability of remanufactured machine tools. For this, reliability of remanufacturing process for machine tools is defined and the influence factors of reliability of remanufacturing process are analyzed. Then, a reliability assessment method of remanufacturing process for machine tools based on GO method is proposed. In addition, the GO reliability model and probability model of remanufacturing process for machine tools are established. Finally, the proposed method is applied to remanufacturing process of gear hobbing machine by one remanufacturer of used machine tools.

Key words: goal oriented (GO) method, reliability, remanufacturing

DU Yanbin, LI Congbo, LIU Shihao. Reliability Assessment Method of Remanufacturing Process for Machine Tools Based on GO Method[J]. Journal of Mechanical Engineering, 2017, 53(11): 203-210.

[1]	YU Shui, WU Xiao, GUO Peng, WANG Zhihua. Adaptive Approximation of the First-crossing PDF for Time-variant Reliability Analysis [J]. Journal of Mechanical Engineering, 2024, 60(5): 264-275.
[2]	LI Ying, ZHANG Jiafang, ZHANG Zhaoyong, WANG Xincheng, ZHANG Jin, KONG Xiangdong. Design of Minimum Diameter of Piston Neck in Swashplate Axial Piston Pump [J]. Journal of Mechanical Engineering, 2024, 60(4): 430-437.
[3]	QIAN Ping, LIU Xinyu, CHEN Wenhua, WANG Zhe, GUO Mingda. Storage Reliability Modeling of Polyurethane Seals for Electrical Connectors [J]. Journal of Mechanical Engineering, 2024, 60(20): 361-371.
[4]	WEI Xinpeng, YAO Zhongyang, BAO Wenli, ZHANG Zhe, JIANG Chao. Evidence-theory-based Reliability Analysis Method Using Active-learning Kriging Model [J]. Journal of Mechanical Engineering, 2024, 60(2): 356-368.
[5]	WANG Wenlin, ZHANG Zibo, LI Yingzi, WU Yongming, WANG Qixin, LIANG Ruoshuang. Testing and Data Analysis Platform for the Reliability Research of Hydraulic Cylinder [J]. Journal of Mechanical Engineering, 2024, 60(18): 385-393.
[6]	YANG Xufeng, CHENG Xin, LIU Zeqing. Reliability Analysis Method Combining Cross-entropy Adaptive Sampling and ALK Model [J]. Journal of Mechanical Engineering, 2024, 60(16): 73-82.
[7]	HU Junyu, HAN Xu, TAO Yourui, LI Shanhu, ZHANG Jianning. Reliability Analysis of Residual Vibration Suppression in Flexible Servo Systems under S-curve Trajectory with Bounded Uncertainty [J]. Journal of Mechanical Engineering, 2024, 60(16): 390-399.
[8]	HU Weifei, LIAO Jiale, GUO Yunfei, YAN Jiquan, LI Guang, YUE Haifeng, TAN Jianrong. Time-dependent Reliability Analysis Based on Physics-Informed Neutral Network [J]. Journal of Mechanical Engineering, 2024, 60(13): 141-153.
[9]	ZHANG Xiancheng, GU Hanghang, LIU Yu, WANG Runzi, SONG Lukai, XIE Liyang, ZHAO Bingfeng, XIAHOU Tangfan, LI Yong, SUN Li, WEN Jianfeng, TU Shantung. Engineering Damage Theory-based Reliability Assessment and Management of High-temperature Equipment [J]. Journal of Mechanical Engineering, 2024, 60(13): 154-172.
[10]	HAO Peng, YANG Hao, CHEN Faxin, ZENG Yaoxiang, WANG Mingjie, WANG Bo. A Precise Design Method for Structural Safety Factor Considering Load and Strength Uncertainty [J]. Journal of Mechanical Engineering, 2024, 60(13): 182-192.
[11]	CHANG Qi, ZHOU Zhang-cong, LIU Fu-chao, ZHANG Hao, YUE Zhu-feng. Reliability Analysis of Aircraft Door Lock Mechanism with Interval Joint Clearance Uncertainties [J]. Journal of Mechanical Engineering, 2023, 59(8): 264-272.
[12]	FAN Xiao-ning, WANG Kai, YU Chang. Reliability-based Design Optimization of Crane Metal Structure Based on Constraint Boundary Sampling [J]. Journal of Mechanical Engineering, 2023, 59(8): 288-298.
[13]	SONG Shouxu, PANG Shaocong, ZHOU Dan, TIAN Yongting. Identification Method of Key Components in Design Process of DC Charging Pile Considering Reliability and Reusability [J]. Journal of Mechanical Engineering, 2023, 59(7): 18-28.
[14]	WANG Lei, GUO Yuyao, CAO Jianhua, ZHANG Zelin, XIA Xuhui, ZHAO Hui. Remanufacturing Service Combination and Optimization for Generalized Growth of Retired Mechanical Products [J]. Journal of Mechanical Engineering, 2023, 59(7): 339-354.
[15]	WANG Xiuyu, CHENG Jiangbo, GE Yunyun, ZHANG Baosen, LIANG Xiubing. Microstructure and Mechanical Properties of the AlCoTi Amorphous Coating for Magnesium Alloy Remanufacturing [J]. Journal of Mechanical Engineering, 2023, 59(7): 367-374,388.

Reliability Assessment Method of Remanufacturing Process for Machine Tools Based on GO Method

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments