Journal of Mechanical Engineering

2017, Volume 53 Issue 11 Publication:05 June 2017
Previous Issue Next Issue
Time Variant Reliability Approach with Time-variant Interval and Upcrossing Model
WANG Pidong, ZHANG Jianguo, KAN Linjie, YANG Lechang
机械工程学报. 2017, 53 (11): 1-9. doi: 10.3901/JME.2017.11.001
Abstract ( 662 )    PDF(2449KB) ( 380 )
Related Articles | Metrics
Sensitivity Analysis on Factors Influencing Motion Reliability of Space Manipulator Based on the Multilayer Mapping Model
JIA Qingxuan, LI Tong, CHEN Gang, SUN Hanxu, ZHANG Jian
机械工程学报. 2017, 53 (11): 10-19. doi: 10.3901/JME.2017.11.010
Abstract ( 650 )    PDF(601KB) ( 531 )
Related Articles | Metrics
Multi-state System Reliability Analysis of Space Mechanism in Orbit Based on Performance Degradation and Universal Generating Function
KAN Linjie, ZHANG Jianguo, WANG Pidong, WANG Qian
机械工程学报. 2017, 53 (11): 20-28. doi: 10.3901/JME.2017.11.020
Abstract ( 887 )    PDF(988KB) ( 353 )
Related Articles | Metrics
Dynamic and Experimental Investigation of Gear-rotor System with Multiple Clearances Coupled
ZHANG Huibo, TIAN Jian, ZHOU Jun, ZHAO Yang, YOU Bindi
机械工程学报. 2017, 53 (11): 29-37. doi: 10.3901/JME.2017.11.029
Abstract ( 679 )    PDF(1391KB) ( 389 )
Related Articles | Metrics
Composite Evaluation Strategy for Complex Objects Parameter Identification
LI Wenhao, MA Huan, ZHANG Heng, XIAO Xinxin
机械工程学报. 2017, 53 (11): 38-43. doi: 10.3901/JME.2017.11.038
Abstract ( 554 )    PDF(658KB) ( 248 )
Related Articles | Metrics
Vibration Characteristics Analysis of Joint with Multiple Clearances in Space Mechanism
ZHANG Huibo, CHEN Zikun, WEI Cheng, ZHAO Yang, YOU Bindi
机械工程学报. 2017, 53 (11): 44-53. doi: 10.3901/JME.2017.11.044
Abstract ( 807 )    PDF(1745KB) ( 408 )
Related Articles | Metrics
Research on Mitigating the Thermal Preload of Space Manipulator
NING Fengping, YAO Jiantao, AN Jingtao, ZHAO Yongsheng
机械工程学报. 2017, 53 (11): 54-60. doi: 10.3901/JME.2017.11.054
Abstract ( 579 )    PDF(3463KB) ( 418 )
Related Articles | Metrics
Friction Performance of Space Machine with MoS₂ Solid Lubrication Coating in Vacuum Environment
HAN Jianchao, LI Yun, GAO Peng, YUAN Baofeng, TAN Chunlin, WANG Long
机械工程学报. 2017, 53 (11): 61-67. doi: 10.3901/JME.2017.11.061
Abstract ( 713 )    PDF(3521KB) ( 427 )
Related Articles | Metrics
Effect of Assembly Situation Variation on Wear of Space Precision Bearings
NING Fengping, YAO Jiantao, AN Jingtao, ZHAO Yongsheng
机械工程学报. 2017, 53 (11): 68-74. doi: 10.3901/JME.2017.11.068
Abstract ( 610 )    PDF(920KB) ( 309 )
Related Articles | Metrics
Friction Torque Modeling of Spacecraft Driving Mechanism Shafting
HU Huajun, PAN Bo, SUN Jing
机械工程学报. 2017, 53 (11): 75-80. doi: 10.3901/JME.2017.11.075
Abstract ( 634 )    PDF(844KB) ( 438 )
Related Articles | Metrics
Reducing the Joint Parameter Jump during the Operation of the Force/Position Fault-tolerant of End-effector for Space Manipulator
CHEN Gang, LI Tong, JIA Qingxuan, SUN Hanxu, ZHANG Jian
机械工程学报. 2017, 53 (11): 81-89. doi: 10.3901/JME.2017.11.081
Abstract ( 481 )    PDF(417KB) ( 265 )
Related Articles | Metrics
Space Robot Reliable Teleoperation Strategy under Large Time Delay
LI Wenhao, ZHANG Heng, MA Huan, XIAO Xinxin
机械工程学报. 2017, 53 (11): 90-96. doi: 10.3901/JME.2017.11.090
Abstract ( 511 )    PDF(1391KB) ( 359 )
Related Articles | Metrics
Research on Flexible Compensation Control Strategy for Planetary Surface Sampling Manipulator
TANG Ling, LIANG Changchun, WANG Yaobing, JIANG Shuiqing, YUAN Baofeng
机械工程学报. 2017, 53 (11): 97-103. doi: 10.3901/JME.2017.11.097
Abstract ( 588 )    PDF(459KB) ( 317 )
Related Articles | Metrics
Hierarchical Task Planning for Space Manipulator with Multi-constraint
WANG Yifan, SUN Hanxu, CHEN Gang, JIA Qingxuan
机械工程学报. 2017, 53 (11): 104-112. doi: 10.3901/JME.2017.11.104
Abstract ( 476 )    PDF(684KB) ( 451 )
Related Articles | Metrics
Vibration Response Characteristics Research for the Hob Spindle System of High-speed Dry Hobbing under Alternating Impact Load
LEI Tao, CAO Huajun, ZHU Libin, YANG Xiao, LI Xianguang
机械工程学报. 2017, 53 (11): 113-121. doi: 10.3901/JME.2017.11.113
Abstract ( 587 )    PDF(2314KB) ( 348 )
Related Articles | Metrics
Integrated Optimization of Workshop Layout and Scheduling to Reduce Carbon Emissions Based on a Multi-objective Fruit Fly Optimization Algorithm
LIU Qiong, ZHAO Haifei
机械工程学报. 2017, 53 (11): 122-133. doi: 10.3901/JME.2017.11.122
Abstract ( 752 )    PDF(558KB) ( 400 )
Related Articles | Metrics
Timing Decision-making Method with Life Cycle Analysis in Predecisional Remanufacturing
KE Qingdi, WANG Hui, SONG Shouxu, LIU Guangfu
机械工程学报. 2017, 53 (11): 134-143. doi: 10.3901/JME.2017.11.134
Abstract ( 547 )    PDF(437KB) ( 446 )
Related Articles | Metrics
Assessing Carbon Emission of Machine Tool Parts from Life Cycle Perspective and Emission Reduction Strategy Research
DENG Zhaohui, Lü Lishu, FU Yahui, WAN Linlin
机械工程学报. 2017, 53 (11): 144-156. doi: 10.3901/JME.2017.11.144
Abstract ( 612 )    PDF(1405KB) ( 665 )
Related Articles | Metrics
Multi-objective Machining Parameters Optimization for Low Energy and Minimum Cutting Fluid Consumption
MA Feng, ZHANG Hua, CAO Huajun
机械工程学报. 2017, 53 (11): 157-163. doi: 10.3901/JME.2017.11.157
Abstract ( 884 )    PDF(1013KB) ( 349 )
Related Articles | Metrics
Integrated Optimization of Process Planning and Shop Scheduling For Reducing Manufacturing Carbon Emissions
LIU Qiong, MEI Zhen
机械工程学报. 2017, 53 (11): 164-174. doi: 10.3901/JME.2017.11.164
Abstract ( 517 )    PDF(641KB) ( 411 )
Related Articles | Metrics
Optimization Design of Predecisional Remanufacturing Based on Structural Function Derivative Coefficient
SONG Shouxu, WANG Wei, KE Qingdi
机械工程学报. 2017, 53 (11): 175-183. doi: 10.3901/JME.2017.11.175
Abstract ( 556 )    PDF(722KB) ( 238 )
Related Articles | Metrics
Tool Path Optimization with High-efficiency and Low Energy Consumption for Surface CNC Machining
LI Li, DENG Xingguo, SHANG Chuanbo
机械工程学报. 2017, 53 (11): 184-194. doi: 10.3901/JME.2017.11.184
Abstract ( 864 )    PDF(2375KB) ( 416 )
Related Articles | Metrics
A Multi-source and Dynamic Energy Modeling Method of Machining Tools Based on BPMN and its Application
YAN Wei, ZHANG Hua, JIANG Zhigang
机械工程学报. 2017, 53 (11): 195-202. doi: 10.3901/JME.2017.11.195
Abstract ( 535 )    PDF(612KB) ( 411 )
Related Articles | Metrics
Reliability Assessment Method of Remanufacturing Process for Machine Tools Based on GO Method
DU Yanbin, LI Congbo, LIU Shihao
机械工程学报. 2017, 53 (11): 203-210. doi: 10.3901/JME.2017.11.203
Abstract ( 580 )    PDF(384KB) ( 416 )
Related Articles | Metrics