METHOD OF NC TOOL PATH GENERATION FOR COMPOUND SURFACES

Abstract

Abstract: A rough milling method for compound surfaces is proposed and implemented. The method can reduce the rough milling time greatly while little uncut material need to be cut in semi-finish and finish process, so the total milling time is reduced. The milling efficiency is promoted. It is proved that the algorithm is stable and reliable.

Key words: CAD, CAM, NC machining, Trimmed surface, Microstructure, Multi-layer and Multi-pass welding, Retained austenite , TIG, Toughness

CLC Number:

TP391.73

Xie Le;Zhou Rurong;Ruan Xueyu. METHOD OF NC TOOL PATH GENERATION FOR COMPOUND SURFACES[J]. , 2003, 39(5): 104-106.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2003/V39/I5/104

[1]	FENG Xiaoming, WAN Zhenping, SUN Dongsheng, LONG Yuanxiang. Research Status and Development Trends of Brake Force-amplifying Transmission Mechanisms [J]. Journal of Mechanical Engineering, 2026, 62(8): 1-20.
[2]	ZHANG Xinjie, WANG Luhang, GUO Konghui, LIU Yang, JIN Gengrui, YAO Quan. System-level Co-design Optimization for Active Camber and Toe Suspension Systems [J]. Journal of Mechanical Engineering, 2026, 62(8): 21-32.
[3]	XIA Ziwen, SHAN Chenwei, ZHANG Mengmeng, LIU Wengang, CUI Minchao, LUO Ming. Influence of Elliptical Ultrasonic Vibration Milling on Cutting Characteristics and Subsurface Mechanical Properties of GH4169 [J]. Journal of Mechanical Engineering, 2026, 62(7): 439-451.
[4]	SHI Nannan, GAO Haitao, TANG Leqian, KONG Charlie, YU Hailiang. Investigation on AA7075 Strips Subjected to Cryorolling and Cryogenic Treatment and Their Fatigue Crack Propagation Performance [J]. Journal of Mechanical Engineering, 2026, 62(6): 47-64.
[5]	LIU Jiaxu, WANG Dacheng, SHI Mingjie, CHEN Shuaifeng, ZHANG Shihong, CHENG Ming. Investigation on Microstructure Evolution of Aero-engine Blades under Combined Forming Process with Flat Cross Wedge Rolling and Die Forging [J]. Journal of Mechanical Engineering, 2026, 62(6): 87-99.
[6]	ZHOU Qiang, LU Honghong, GUO Denggang, CHEN Pengwan, WANG Baoyu. Microstructure and Mechanical Behavior of TA2/TC4 Titanium Alloy Composites Fabricated by Explosion Welding + Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 100-110.
[7]	CAO Xianming, DANG Yuehui, CHEN Zejun, CONG Fuguan, ZHANG Yunlong, WANG Qiang. Research on Structure and Impact Property of Hot Roll bonded laminated 7A01/7A52 Aluminum Alloy Plates [J]. Journal of Mechanical Engineering, 2026, 62(6): 154-162.
[8]	LIU Changyong, WU Huaian, LI Chen, HUANG Kehao, LIU Zhiyuan, CHEN Zhangwei, ZHANG Lei. Investigation on the Four-axis Multi-material Simultaneous 3D Printing Based on Rotating Nozzle [J]. Journal of Mechanical Engineering, 2026, 62(5): 399-407.
[9]	HAN Xinyu, LIU Junsong, SHI Yan. Properties of B₄Cp/Al Composites Prepared by Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(4): 224-232.
[10]	LU Kaiyi, WANG Zeng, WANG Xianliang, LU Zehua, LIU Huaiju. Fatigue Reliability Analysis of Aero-engine Gear Transmission System Considering Thermal-mechanical Loads [J]. Journal of Mechanical Engineering, 2026, 62(3): 407-419.
[11]	ZHAN Xiaohong, GAO Zhuanni, ZHANG Kaiyu, WANG Jianfeng, LI Xiang, XU Fangda. The Coupling Evolution Mechanism of Microstructure and Pores during Laser Coaxial Wire Additive Manufacturing of 205C/7075 Aluminum Alloy [J]. Journal of Mechanical Engineering, 2026, 62(3): 160-175.
[12]	HU Xuzhao, ZHANG Dianbao, XU Zhenlin, CHEN Xianglin, FANG Fang, XIA Ailin. Effect of Annealing on the Magnetic and Mechanical Properties of AlCoCrCuFeNi High-entropy Alloy Prepared by the Laser Powder Bed Fusion [J]. Journal of Mechanical Engineering, 2026, 62(3): 235-247.
[13]	LIU Tengfei, YANG Tengrui, TIAN Xiaoyong, WU Lingling, LI Dichen. Vacuum 3D Printing Process Mechanism and Performance of Polyether Ether Ketone and Composites for Space Extreme Environments [J]. Journal of Mechanical Engineering, 2026, 62(3): 271-281.
[14]	WU Yue, ZHANG Haiming, LIU Chang, BAI Jinglong, ZHANG Tingting, WANG Tao, HUANG Qingxue. Effect of Reheating between Rolling Passes on Microstructure and Bonding Properties of Hot-rolled Ti/Steel Clad Plates [J]. Journal of Mechanical Engineering, 2026, 62(2): 146-156.
[15]	ZHAN Jiatong, LIU Zhizhong, YE Xiongyue, SHI Yonghua, ZHONG Shaotao. Study on Multi-mode Magnetic Control Power Supply and Weld Sem Formation Optimization Mechanism for K-TIG Backing Welding of 9%Ni Steel [J]. Journal of Mechanical Engineering, 2026, 62(2): 157-169.

METHOD OF NC TOOL PATH GENERATION FOR COMPOUND SURFACES

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments