[1] |
WU Jie, DANG Jiaqiang, LI Yugang, CHEN Dong, AN Qinglong, WANG Haowei, CHEN Ming.
Study on Strengthening Mechanism and Anti-fatigue Performance of Stress Ultrasonic Rolling
[J]. Journal of Mechanical Engineering, 2024, 60(9): 127-136.
|
[2] |
WEN Qiuling, YANG Ye, HUANG Hui, HUANG Guoqin, HU Zhongwei, CHEN Jinhong, WANG Hui, WU Xian.
Review of Research Progress in Laser-based Hybrid Machining of Hard and Brittle Materials
[J]. Journal of Mechanical Engineering, 2024, 60(9): 168-188.
|
[3] |
LIANG Peng, ZHAO Wenzhuo, WU Tonghai, RAN Yi.
Ultrasonic Echo Characteristics and On-machine Detection Method of Small Tooth Cracks in Generator Rotors
[J]. Journal of Mechanical Engineering, 2024, 60(8): 11-21.
|
[4] |
WU Jizhan, WEI Peitang, WU Shaojie, LIU Huaiju, ZHU Caichao.
Rolling Contact Fatigue Performance Prediction and Surface Integrity Optimization of Aviation Gear Steel
[J]. Journal of Mechanical Engineering, 2024, 60(8): 81-93.
|
[5] |
DONG Qingbing, CHEN Zhuang, LUO Zhentao, ZHANG Jie, WEI Jing.
Fatigue Life Prediction and Fracture Behavior Study of Fretting Interface at Three-dimensional Line Contact
[J]. Journal of Mechanical Engineering, 2024, 60(8): 107-120.
|
[6] |
LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang.
Effect of Brazing Time on TiAl Joint Brazed with TiH2-65Ni+TiB2 Filler
[J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
|
[7] |
GU Yufen, LU Na, SHI Yu, SUN Qingling.
Microstructure Characteristics of 16MnDR Steel Welded Joint and Its Corrosion Behavior in Hydrofluoric Acid Environment
[J]. Journal of Mechanical Engineering, 2024, 60(8): 196-203.
|
[8] |
YANG Siyu, XU Lianyong, ZHAO Lei, HAN Yongdian.
Research on Corrosion Fatigue Performance and Fatigue Fracture Mechanism of Pre-corrosion EH36 Steel Welded Joints
[J]. Journal of Mechanical Engineering, 2024, 60(8): 204-211.
|
[9] |
ZOU Xiaolong, YANG Guangxue, ZHANG Bo, LI Guoshun, ZHANG Yichao, CHEN Can, ZHANG Shujun.
Study on Dynamic Stress Characteristics of Bogie Frame of High-speed EMU
[J]. Journal of Mechanical Engineering, 2024, 60(8): 212-223.
|
[10] |
CHEN Wei, ZHAO Jie, ZHU Libin, CAO Haibo.
Research Progress on Additive Manufacturing of Low Activation Steels
[J]. Journal of Mechanical Engineering, 2024, 60(7): 312-333.
|
[11] |
ZHENG Yang, ZHAO Zihao, LIU Wei, YU Zhengzhe, NIU Wei, LEI Yiwen, SUN Ronglu.
Research Progress in High-performance Mg Alloys Prepared by Additive Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(7): 385-400.
|
[12] |
LI Kun, JI Chen, BAI Shengwen, JIANG Bin, PAN Fusheng.
Research Status and Prospects of Wire-arc Additive Manufacturing Technology for High-performance Magnesium Alloys
[J]. Journal of Mechanical Engineering, 2024, 60(7): 289-311.
|
[13] |
WANG Boshi, CHEN Nannan, CAI Yan, WANG Min.
Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
|
[14] |
WANG Tengfei, SUN Wenjing, ZHOU Jinsong, GONG Dao, WANG Qiushi, ZHANG Zhanfei.
Research on Compiling Vibration Load Spectrum of Equipment mounted on Bogie Frame Based on Fatigue Damage Spectrum
[J]. Journal of Mechanical Engineering, 2024, 60(6): 287-295.
|
[15] |
DU Jun, WANG Qianyuan, HE Jimiao, ZHANG Yongheng, WEI Zhengying.
Influence of the Offset Distance between Droplet and Molten Pool on the Molten Pool Morphology in TIG-assisted Droplet Deposition Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(5): 219-230.
|