STUDY ON VACUUM BRAZING OF TITANIUM ALLOY TI-6AL-4V

Abstract

Abstract: For the purpose to settle the problem that melting point of Ii-Zr-Cu-Ni filler metal is developed. On the basis of the experimental results in present work, the joint got a high strength because the original structure in base metal is preserved due to the relatively low brazing temperature, the same time the increasing of Cu in large extent in the filler metal Ti-Zr Cu may be the cause of the formation of continuous Ti2Cu and TiCu at the center of brazing zone which degraded joint strength seriously.

Key words: Brazing Structure Strength, Ti-6Al-4V

CLC Number:

TG454

Wu Mingfang;Jiang Chengyu;Yu Zhishui;Liang Chao. STUDY ON VACUUM BRAZING OF TITANIUM ALLOY TI-6AL-4V[J]. , 2002, 38(4): 71-73.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I4/71

[1]	ZHAN Yuanxin, LIN Qinlong, LIU Yang, GAO Ying, WU Jianming, ZHANG Jiazheng. Advances in Machine Learning for Additive Manufacturing of Ti-6Al-4V [J]. Journal of Mechanical Engineering, 2026, 62(3): 86-103.
[2]	TIAN Yebing, MA Zhen, QIAN Cheng, AHMAD S, MA Xifeng, YUAN Xiangyu, FAN Zenghua. Material Removal Characteristics and Predictive Models for Magnetorheological Shear Thickening Polishing Method [J]. Journal of Mechanical Engineering, 2024, 60(23): 365-376.
[3]	RONG Peng, Cheng Jing, DENG Hongwen, TAO Changan, GAO Chuanyun, RAN Xianzhe, CHENG Xu, TANG Haibo, LIU Dong. Effect of Different Heat Treatments on Microstructure and Tensile Properties of TC4 Titanium Alloy Fabricated by Laser Directed Energy Deposition [J]. Journal of Mechanical Engineering, 2024, 60(20): 99-107.
[4]	ZHU Libin, WANG Ying, NIE Shuaishuai, HUANG Haihong, LIU Zhifeng. Thermal Equilibrium Research of Supercritical CO₂ Assisted Cutting Process Based on Mass Flow Optimization [J]. Journal of Mechanical Engineering, 2024, 60(19): 367-376.
[5]	ZHOU Jian, XU Hongkun, LIU Kun. Study on the Densification Mechanism of Ti-6Al-4V Powder during High Velocity Compaction Based on the Evolution of Microscale Pores [J]. Journal of Mechanical Engineering, 2024, 60(16): 180-189.
[6]	NIU Ying, JIAO Feng, ZHAO Bo, WANG Xiaobo. 3D Finite Element Simulation and Experimentation of Residual Stress in Longitudinal Torsional Ultrasonic Assisted Milling [J]. Journal of Mechanical Engineering, 2019, 55(13): 224-232.
[7]	LIU Jiajia, JIANG Xinggang, GAO Ze, ZHANG Mingliang, ZHANG Deyuan. Investigation of the Effect of Vibration Amplitude on the Surface Integrity in High-speed Rotary Ultrasonic Elliptical Machining for Side Milling of Ti-6Al-4V [J]. Journal of Mechanical Engineering, 2019, 55(11): 215-223.
[8]	QI Bojin, YANG Zhou, YANG Mingxuan, CONG Baoqiang. Analysis on Characteristic of Ultra High Frequency Pulsed Gas Tungsten Arc Welding Process [J]. Journal of Mechanical Engineering, 2016, 52(2): 26-32.
[9]	LI Yujia, XUAN Fuzhen, TU Shantung. Influence of Stress Ratios and Residual Stress on the Fracture Pattern of Ti-6Al-4V Alloy in High Cycle Regime [J]. Journal of Mechanical Engineering, 2015, 51(6): 45-50.
[10]	LIU Lijuan, LÜ Ming, WU Wenge, ZHU Xijing. Experimental Study on the Chip Morpholgy in High Speed Milling Ti-6Al-4V Alloy [J]. Journal of Mechanical Engineering, 2015, 51(3): 196-205.
[11]	LIU Gang;XING Xiangli;LU Jia;LI Jianchen. Brazing of Ceramic ZrO2 /Titanium Alloy Using Amorphous Solder [J]. , 2013, 49(22): 121-127.
[12]	Yu Zhishui;Wu Mingfang;Qi Kai;Wang Fengjiang. INTERFACE REACTION OF JOINT Al2O3/(Ag72Cu28)97Ti3/Ti-6Al-4V [J]. , 2002, 38(2): 31-34.

STUDY ON VACUUM BRAZING OF TITANIUM ALLOY TI-6AL-4V

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 12

Recommended Articles

Metrics

Comments