HARD WITH LOW-FRICTION COATING LAYERS FOR CUTTING TOOLS

Abstract

Abstract: Development of coating layer for cutting tools shows that the anti-wear layer emphasized on high hardness is gradually replaced by the composite of low friction material incorporate with anti-wear substance. Experimental results on friction and wear properties of different MoS2 and carbon films are shown with our recent results.

Key words: Anti-wear, Coating layer, Cutting tools, Flash, Friction shearing, Friction stitch welding, Unit forming

CLC Number:

TG17

Huang He;He Jiawen. HARD WITH LOW-FRICTION COATING LAYERS FOR CUTTING TOOLS[J]. , 2002, 38(4): 155-158.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I4/155

[1]	HAN Wenkang, ZHAO Jinfu, LIU Zhanqiang, WANG Bing, WANG Pengyang, SONG Qinghua, REN Xiaoping, WANG Zhaoxin. Review of Temperature Measurement Methods Based on Thermoelectric Sensors and Current Status of Their Application in Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2026, 62(2): 17-34.
[2]	LIN Pengyu, LI Tao, SONG Junjie, MAO Yu, ZHANG Ziyi, YOU Xin, HU Litian, ZHANG Yongsheng. Investigating the Effect of h-BN Shape on the High-temperature Tribological Properties of Si₃N₄-matrixed Composite Ceramics [J]. Journal of Mechanical Engineering, 2026, 62(1): 148-158.
[3]	JIANG Wenjuan, WANG Wenjian, DING Haohao, LIU Qiyue. Study on Ratcheting Behavior of Flash Butt Welds in U71Mn Rail [J]. Journal of Mechanical Engineering, 2025, 61(8): 116-126.
[4]	LUO Zichao, LIU Xiubo, CHENG Wei, LI Xingong, XIA Jie, ZHENG Jun. Review of Tribology and Lubrication for Silicon Carbide Ceramic [J]. Journal of Mechanical Engineering, 2025, 61(13): 192-212.
[5]	MA Jing, ZHANG Mingjian, LIU Qiang, LIU Xianli, YUE Caixu, YANG Shaocheng. A Review of the Research Progress of Bionic Cutting Tools [J]. Journal of Mechanical Engineering, 2022, 58(13): 261-281.
[6]	LIU Qiang, ZHANG Haijun, LIU Xianli, GAO Dayong, ZHANG Mingjian. A Review of Research on Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2021, 57(21): 248-268.
[7]	ZHENG Yuesheng, XIE Xinda, HUANG Huifen, HE Tongtong. AC Withstand Characteristics of Gas-solid Hybrid Insulation Considering Flashover Along Barrier Surface [J]. Journal of Electrical Engineering, 2021, 16(2): 69-76.
[8]	XIANG Yitong, CHEN Pan, ZHAO Yushun. Overview of Weak Links and Optimization of Roof Composite Insulator in High-speed Sand Environment [J]. Journal of Electrical Engineering, 2020, 15(2): 1-10.
[9]	Sihua Wang, Youlong Wu. Effect of Salty Fog on Flashover Characteristics of OCS Composite Insulators^* [J]. Chinese Journal of Electrical Engineering, 2019, 5(3): 59-66.
[10]	Li Jing,Xu Peng juan,Yang Guang,Feng Yuning,Fu Si. Study on the Effect of Salt Density on Electric and Temperature Field of Contaminated Composite Insulator [J]. Journal of Electrical Engineering, 2018, 13(7): 23-30.
[11]	Li Jing,Feng Yuning,Liu Jitao,Xu Pengjuan. The Impact of the 500kV Ion Flow Field of High Voltage DC Transmission Lines on Insulator Potential Distribution [J]. Journal of Electrical Engineering, 2018, 13(5): 21-26.
[12]	GAO Wenzhong, WANG Dong, LI Changsong, XU Changda. Design and Experamental Research of Novel Adsorbent Water Separation Device for Salt Solution Treatment [J]. Journal of Mechanical Engineering, 2017, 53(6): 152-157.
[13]	QU Rui, YANG Lijun, TIAN Lifeng, XU Wei, CUI Lei, YIN Yayun. Procedure Analysis of Friction Hydro Pillar Processing [J]. Journal of Mechanical Engineering, 2016, 52(8): 97-103.
[14]	GU Guoping, ZHANG Chaohui, HUANG Baocheng, LI Sen, WANG Lei. Tribological Properties of Aqueous Solutions with Polyether and Borate [J]. Journal of Mechanical Engineering, 2016, 52(3): 110-117.
[15]	LIU Xianli, JIANG Yancui, WU Shi, LI Maoyue, YUE Caixu, CHEN Tao. Research on the Technical Progress of Milling for Hardened Steel Mould of Automotive Covering Parts [J]. Journal of Mechanical Engineering, 2016, 52(17): 35-49.

HARD WITH LOW-FRICTION COATING LAYERS FOR CUTTING TOOLS

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments