• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 453-462.doi: 10.3901/JME.260336

Previous Articles    

Research on the Reconstruction of the Temperature Field in the Cutting Zone of Integral Milling Cutters Based on Rapid Solution of Heat Conduction Inverse Problems by Bi-LSTM

YIN Zengbin, ZHAO Teng, ZHENG Yitong   

  1. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094
  • Received:2025-09-20 Revised:2026-02-26 Published:2026-11-20

Abstract: To meet the demand for online precise monitoring of the temperature field in the cutting zone during the milling process, an online reconstruction method of the temperature field in the cutting zone of the milling tool is proposed by combining the finite element method and the Duhamel superposition principle. The real-time temperature data is obtained by the thermistor sensor installed inside the milling tool, and the actual heat flux is reversely predicted based on the Bi-directional long short-term memory network (Bi-LSTM) with excellent training effect. According to the real-time temperature data, the most appropriate temperature sensitivity coefficient is selected from the temperature sensitivity coefficient data set. Finally, the improved Duhamel principle model for milling machining characteristics is used to realize the rapid reconstruction of the temperature field of the milling cutter. The experimental results show that the method not only improves the calculation efficiency, but also can accurately reflect the temperature field changes in the cutting area of the tool in the actual milling process, which lays a technical foundation for the intelligent optimization of the cutting process.

Key words: end mill, cutting temperature, temperature field reconstruction, inverse heat conduction problem, heat conduction forward problem, Bi-directional long short-term memory network(Bi-LSTM)

CLC Number: