• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (17): 443-452.doi: 10.3901/JME.260918

Previous Articles    

Fabrication of 18Ni300/Cu Bimetallic Composite Material by Laser Powder Bed Fusion Combined with Infiltration Process

ZHANG Jiacheng1,2, KONG Yu1,2, PENG Kaiyuan1,2, LIU Zhifeng1,2, HUANG Haihong1,2   

  1. 1. School of Mechanical Engineering, Hefei University of Technology, Hefei 230009;
    2. Anhui Province Key Laboratory of Low Carbon Recycling Technology and Equipment for Mechanical and Electrical Products, Hefei 230009
  • Received:2025-09-12 Revised:2026-03-05 Published:2026-11-20

Abstract: For copper-steel bimetallic composites, traditional manufacturing processes are limited by structural control capabilities, making it difficult to simultaneously optimize the high thermal conductivity of copper and the high strength of steel. Therefore, this study adopted a novel process combining laser powder bed melting with infiltration to fabricate an 18Ni300/Cu bimetallic composite material with interpenetrating characteristics, followed by a comprehensive investigation of its microstructure, mechanical properties, thermal conductivity, and wear resistance. Experimental results show that the 18Ni300/Cu bimetallic composite forms a good metallurgical bond at the heterogeneous interface and exhibits a unique crack self-healing ability. At room temperature, the yield strength of the 18Ni300/Cu bimetallic composite is 402.7 MPa, and the friction coefficient is 0.47. Compared with pure copper, the yield strength of the composite increases by 104.2%, and the friction coefficient decreases by 19.0%. Additionally, the material exhibits excellent thermal conductivity, with a measured value of 227.1 W/(m·K). Experimental analysis indicates that the interface mechanical interlocking features and back stress strengthening mechanisms result in a strength that exceeds the theoretical value predicted by the rule of mixtures. During abrasive wear, fragmented particles generated at the contact interface form a lubricating-like layer, effectively suppressing adhesive wear. The interpenetrating structure markedly enhances thermal conductivity by constructing a continuous thermal conduction network. The potential application of 18Ni300/Cu bimetallic composite material in the mold industry was explored, and a cost-effective new design for a hot stamping die was proposed.

Key words: laser powder bed fusion, infiltration, bimetallic composite material, mechanical properties, thermal conductivity

CLC Number: