• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 84-94.doi: 10.3901/JME.260613

Previous Articles    

Research on Improved FASTSIM Algorithm for Adaptive Creepage Characteristics

YANG Xu1,2, WEN Yongpeng1,2, LI Yimin1,2, ZONG Zhixiang3, LOU Bozhen1,2   

  1. 1. School of Urban Railway Transportation, Shanghai University of Engineering Science, Shanghai 201620;
    2. Shanghai Engineering Research Centre for Vibration and Noise Control Technologies in Railway Transportation, Shanghai University of Engineering Science, Shanghai 201620;
    3. Vehicle Branch of Shanghai Metro Maintenance and Guarantee Co., Ltd., Shanghai 200235
  • Received:2025-08-16 Revised:2026-02-01 Published:2026-10-14

Abstract: During the service life of railway vehicles, complex creepage conditions are inevitable. As the most commonly used algorithm for solving wheel-rail tangential contact problems, the FASTSIM algorithm exhibits poor creepage adaptability, and shows certain limitations such as insufficient computational accuracy under complex creepage conditions. To improve the creepage adaptability and accuracy of FASTSIM in simulation analysis, this study proposes an improved algorithm including adaptive flexibility coefficients and nonlinear stress distribution, addressing two main shortcomings of the original method:the inability of the flexibility coefficient to adapt to varying creepage magnitudes and the assumption of a linear increase in tangential stress within the contact patch. The modified algorithm is validated against the FaStrip models in terms of stick-slip division and stress distribution, confirming its effectiveness and correctness. Furthermore, the advantages of the improved algorithm in stick-slip partitioning, stress distribution, and tangential force calculation are demonstrated. The results show that the improved algorithm exhibits better adaptability to complex creepage conditions, achieving high-accuracy predictions of wheel-rail tangential forces under both small and large creepage, thus enabling the FASTSIM algorithm to have creep adaptive characteristics. Additionally, the improved algorithm achieves higher precision in calculating tangential stress distribution and peak values within the contact patch, while exerting minimal influence on the creepage curve, thereby significantly improving the overall computational accuracy of the FASTSIM algorithm.

Key words: wheel-rail tangential contact algorithm, FASTSIM, non-Hertzian contact, adaptive, flexibility coefficient, stress distribution

CLC Number: