• CN: 11-2187/TH
  • ISSN: 0577-6686

Journal of Mechanical Engineering ›› 2026, Vol. 62 ›› Issue (16): 467-480.doi: 10.3901/JME.260150

Previous Articles    

Simulation Study on Wheel--brake Shoe Temperature Rise of Freight Wagon under Complex Environment and Real-time Temperature Monitoring Mode

LUO Yifei, ZHANG Wenjie, TAO Gongquan, WEN Zefeng, WANG Wenjian, LIANG Dong   

  1. State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu 610031
  • Received:2025-08-13 Revised:2026-02-07 Published:2026-10-14

Abstract: Wheel-brake shoe temperature rise is a key factor that restricts the application of tread braking of freight wagons on long and steep slopes. A numerical model is developed to simulate the refined tread braking strategies, which incorporates a three-dimensional transient heat transfer finite element model of wheel-brake shoe, an electro-pneumatic braking model, and a temperature monitoring and braking control loop. The disturbances from complex environments and the braking system are taken into account. Through numerical simulation, the temperature rise history, distribution, cycling of freight wagon wheel and brake shoe on a typical long and steep slope in China, along with the influencing factors are analyzed. The results show that the cyclic tread braking in conjunction with the electrodynamic braking of locomotive is more conducive to reducing the temperature of wheel and brake shoe compared to the constant-speed tread braking throughout the slope, but it also induces extra temperature sub-cycles. The tread braking cycle and the train speed change tend to be advanced with the increase of the disturbance coefficient variance, and the fluctuation amplitude of the wheel-brake shoe temperature, especially at the center of the wheel-rail contact band, increases. Under the temperature monitoring mode, the temperature distribution characteristics on the surface of the wheel-shoe remain unchanged, while the temperature level at different positions decreases by 18.3% to 30.2%. The compensated electrodynamic braking cut-off ratio should be as large as possible without causing insufficient braking cylinder recharging time to reduce thermal fatigue damage.

Key words: long and steep slope, electropneumatic brake, wheel--brake shoe temperature rise, finite element method, disturbance, temperature monitoring

CLC Number: