Static Modeling and Analysis of Cable-driven Continuum Robots under Large Load

doi:10.3901/JME.2024.15.028

Abstract

Abstract: Currently, continuum robots have weak load capacity and cannot meet the application requirements of large loads. Therefore, a cable-driven continuum robot based on distributed elastic elements that can withstand large loads is designed. The robot has passive compliance and can be utilized for applications such as cushioning, energy saving condition. In order to build the static model between the bending deformation of the continuum robot and the external load, Newton-Euler equations under external loads are established, and numerical solvers are designed for simulation. Compared with the classical constant curvature model, the simulation results are more consistent with the actual deformation. Three groups of experiments are conducted for horizontal, vertical, and circular motions at the end of the continuum robot. The results show that under a 7.5 kg load, the maximum average error between the edge points of the robot disks and corresponding simulation points is 6.58 mm, and the mean square error is 4.50 mm. These values respectively account for 2.87% and 1.96% of the total length of the continuum robot, indicating that the robot can achieve accurate motion under large loads and verifying its feasibility in large loads.

Key words: cable-driven, continuum robot, large load, kinematic modeling, static modeling

CLC Number:

TP24

LEI Fei, LIU Siyu, LIAO Junbei, GUO Zhao, WANG Zhirui, YAN Tong, DANG Ruina, SU Bo. Static Modeling and Analysis of Cable-driven Continuum Robots under Large Load[J]. Journal of Mechanical Engineering, 2024, 60(15): 28-37.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/10.3901/JME.2024.15.028

http://www.cjmenet.com.cn/EN/Y2024/V60/I15/28

References

[1] ROBERT J，WEBSTER I，JONES B A.Design and kinematic modeling of constant curvature continuum robots:A review[J].The International Journal of Robotics Research，2010，29(13):1661-1683.
[2] ZHANG J，FANG Q，XIANG P，et al.A survey on design，actuation，modeling，and control of continuum robot[J].Cyborg and Bionic Systems，2022(1):1-13.
[3] 严鲁涛，王琦，李海源，等.基于SMA驱动的连续体手术机器人研究综述[J].机械工程学报，2021，57(11):138-152. YAN Lutao，WANG Qi，LI Haiyuan，et al.Review of continue surgical robot actuated by SMA[J].Journal of Mechanical Engineering，2021，57(11):138-152.
[4] 徐凯，刘欢.多杆连续体机构:构型与应用[J].机械工程学报，2018，54(13):25-33. XU Kai，LIU Huan.Multi-backbone continuum mechanisms:Forms and applications[J].Journal of Mechanical Engineering，2018，54(13):25-33.
[5] WEI D，GAO T，MO X，et al.Flexible bio-tensegrity manipulator with multi-degree of freedom and variable structure[J].Chinese Journal of Mechanical Engineering，2020，33(1):3.
[6] BURGNER-KAHRS J，RUCKER D C，CHOSET H.Continuum robots for medical applications:A survey[J].IEEE Transactions on Robotics，2015，31(6):1261-1280..
[7] MOHAMMAD A，RUSSO M，FANG Y，et al.An efficient follow-the-leader strategy for continuum robot navigation and coiling[J].IEEE Robotics and Automation Letters，2021，6(4):7493-7500.
[8] OLIVER-BUTLER K，TILL J，RUCKER C.Continuum robot stiffness under external loads and prescribed tendon displacements[J].IEEE Transactions on Robotics，2019，35(2):403-419.
[9] RUCKER D C，WEBSTER R J.Mechanics of continuum robots with external loading and general tendon routing[C]//Experimental Robotics:The 12th International Symposium on Experimental Robotics.Berlin，Heidelberg:Springer Berlin Heidelberg，2014:645-654.
[10] 刘忠振，蔡志勤，彭海军，等.位-力驱动的线驱连续型机器人的动力学建模及实验验证[J].机器人，2022，44(4):410-417. LIU Zhongzhen，CAI Zhiqin，PENG Haijun，et al.Dynamic modeling and experimental validation of cable-driven continuum robots actuated in position-force mode[J].Robot，2022，44(4):410-417.
[11] YUAN H，LI Z.Workspace analysis of cable-driven continuum manipulators based on static model[J].Robotics and Computer-Integrated Manufacturing，2018，49:240-252.
[12] CHIKHAOUI M T，LILGE S，KLEINSCHMIDT S，et al.Comparison of modeling approaches for a tendon actuated continuum robot with three extensible segments[J].IEEE Robotics and Automation Letters，2019，4(2):989-996.
[13] ZHANG X，LI W，CHIU P W Y，et al.A novel flexible robotic endoscope with constrained tendon-driven continuum mechanism[J].IEEE Robotics and Automation Letters，2020，5(2):1366-1372.
[14] YANG C，GENG S，WALKER I，et al.Geometric constraint-based modeling and analysis of a novel continuum robot with shape memory alloy initiated variable stiffness[J].The International Journal of Robotics Research，2020，39(14):1620-1634.
[15] 李冰玉，阚子云，彭海军，等.基于张拉整体结构的连续型弯曲机械臂设计与研究[J].机器人，2020，42(6):686-696. LI Bingyu，KAN Ziyun，PENG Haijun，et al.Design and research on a continuum manipulator based on tensegrity structure[J].Robot，2020，42(6):686-696.
[16] 曹晟阁，于靖军，潘杰，等.滚动接触柔性连续体机器人的设计与运动能力分析[J].机械工程学报，2021，57(19):21-29. CAO Shengge，YU Jingjun，PAN Jie，et al.Design and moving capability analysis of a flexible continuum robot with rolling contact[J].Journal of Mechanical Engineering，2021，57(19):21-29.
[17] 杨太玮，郑旭东，徐文福，等.考虑迟滞及变形影响的主被动混合驱动绳驱空间机械臂运动学建模及求解[J].机器人，2022，44(1):45-54. YANG Taiwei，ZHENG Xudong，XU Wenfu，et al.Kinematics modeling and solution of hybrid active-passive cable-driven space manipulator considering the effects of hysteresis and deformation[J].Robot，2022，44(1):45-54.
[18] YUAN H，ZHOU L，XU W.A comprehensive static model of cable-driven multi-section continuum robots considering friction effect[J].Mechanism and Machine Theory，2019，135:130-149.
[19] LIU T，MU Z，WANG H，et al.A cable-driven redundant spatial manipulator with improved stiffness and load capacity[C]//2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).2018:6628-6633.
[20] LIU T，XU W，YANG T，et al.A hybrid active and passive cable-driven segmented redundant manipulator:Design，kinematics，and planning[J].IEEE/ASME Transactions on Mechatronics，2021，26(2):930-942.
[21] ROESTHUIS R J，MISRA S.Steering of multisegment continuum manipulators using rigid-link modeling and FBG-based shape sensing[J].IEEE Transactions on Robotics，2016，32(2):372-382.
[22] RUCKER D C，JONES B A，WEBSTER III R J.A geometrically exact model for externally loaded concentric-tube continuum robots[J].IEEE Transactions on Robotics，2010，26(5):769-780.
[23] RONE W S，BEN-TZVI P.Continuum robot dynamics utilizing the principle of virtual power[J].IEEE Transactions on Robotics，2014，30:275-287.
[24] XU W，LIU T，LI Y.Kinematics，dynamics，and control of a cable-driven hyper-redundant manipulator[J].IEEE/ASME Transactions on Mechatronics，2018，23(4):1693-1704.
[25] MAVKO G，MUKERJI T，DVORKIN J.The rock physics handbook[M].3rd ed.Cambridge:Cambridge University Press，2020.
[26] GAO G，WANG H，XIA Q，et al.Study on the load capacity of a single-section continuum manipulator[J].Mechanism and Machine Theory，2016，104:313-326.
[27] WANG P，YANG X，WANG X，et al.General kinetostatic modeling and deformation analysis of a two-module rod-driven continuum robot with friction considered[J].Chinese Journal of Mechanical Engineering，2023，36(1):68.