Simulation Analysis Method for Equivalent Mechanical Characteristics of Rotor Asymmetric Supports with Bearing Clearance

doi:10.3901/JME.2021.19.013

Abstract

Abstract: The asymmetry of bearing clearance and bearing support exists widely in rotating systems. They are the main influence factors of complex vibration characteristics such as rotor vibration jumping, deviation and backward whirling. In engineering, the complex vibration under their coupling influence is not clear, and the relevant equivalent simulation methods are also imperfect. Therefore, a simulation method for equivalent mechanical properties of asymmetric support structures with bearing clearance is proposed. The problem of the existing method, which is difficult to simulate the asymmetry of bearing clearance and support simultaneously, is solved by the circumferential decomposition of the support structure. The effectiveness of the proposed method was verified by the analysis of a typical engine rotor system. The results showed that when the bearing clearance and the support coexist asymmetrically, frequency separation, vibration jumping and deviation appeared, and the influences of bearing clearance and the support were coupled to each other. The proposed simulation method lays a foundation for the in-depth analysis of the mechanism of such complex vibration problems in engineering.

Key words: support asymmetry, bearing clearance, rotor system, nonlinear

CLC Number:

V231.96

FENG Kun, WANG Jingshuo, ZUO Yanfei, JIANG Zhinong. Simulation Analysis Method for Equivalent Mechanical Characteristics of Rotor Asymmetric Supports with Bearing Clearance[J]. Journal of Mechanical Engineering, 2021, 57(19): 138-146.

References

[1] CHEN Guo. Study on nonlinear dynamic response of an unbalanced rotor supported on ball bearing[J]. Journal of Vibration and Acoustics-Transactions of the ASME, 2009,131(6).
[2] 何芝仙,干洪.计入轴承间隙时轴-滚动轴承系统动力学行为研究[J].振动与冲击,2009,28(9):120-124. HE Zhixian,GAN Hong,Study on dynamic behavior of shaft-rolling bearing system when bearing clearance is taken into account[J]. Journal of Vibration and Shock,2009,28(9):120-124.
[3] 侯磊,陈予恕.非线性共振及其计算和应用[J].机械工程学报,2019,55(13):1-12. HOU Lei,CHEN Yushu. Nonlinear resonance and its calculations and applications[J]. Chinese Journal of Mechanical Engineering,2019,55(13):1-12.
[4] 曹宏瑞,景新,苏帅鸣,等.中介轴承故障动力学建模与振动特征分析[J].机械工程学报,2020,56(21):89-99. CAO Hongrui,JING Xin,SU Shuaiming,et al. Dynamic modeling and vibration analysis for Inter-shaft bearing fault[J]. Chinese Journal of Mechanical Engineering,2020,56(21):89-99.
[5] 刘永强,王宝森,杨绍普.含外圈故障的高速列车轴承转子系统非线性动力学行为分析[J].机械工程学报,2018,54(8):17-25. LIU Yongqiang,WANG Baosen,YANG Shaopu. Nonlinear dynamic behaviors analysis of the bearing rotor system with outer ring faults in the high-speed train[J]. Chinese Journal of Mechanical Engineering,2018,54(8):17-25.
[6] GAO Peng,HOU Lei,YANG Rui,et al. Local defect modelling and nonlinear dynamic analysis for the inter-shaft bearing in a dual-rotor system[J]. Applied Mathematical Modelling,2019,68:29-47.
[7] 曹宏瑞,李亚敏,成玮,等.局部损伤滚动轴承建模与转子系统振动仿真[J].振动、测试与诊断,2014(3):549-552. CAO Hongrui,LI Yaming,CHENG Wei,et al. Modeling of local damage rolling bearing and vibration simulation of rotor system[J]. Journal of Vibration Measurement&Diagnosis,2014(3):549-552.
[8] KANKAR P K,SHARMA S C,HARSHA S P. Nonlinear vibration signature analysis of a high speed rotor bearing system due to race imperfection[J]. Journal of Computational and Nonlinear Dynamics,2011,7(1):11-14.
[9] 王海飞,陈果.含滚动轴承径向游隙的航空发动机整机振动响应特征分析[J].推进技术,2016,37(5):945-959. WANG Haifei,CHEN Guo. Analysis of vibration response characteristics of aeroengine with radial clearance of rolling bearing[J]. Journal of Propulsion Technology,2016,37(5):945-959.
[10] 李洪亮,陈予恕.含间隙球轴承-转子系统的主共振研究[J].航空学报,2013,34(6):1356-1362. LI Hongliang,CHEN Yushu. Study on main resonance of ball bearing-rotor system with clearance[J]. Chinese Journal of Aeronautics,2013,34(6):1356-1362.
[11] JOH C Y,LEE C W. Use of dFRFs for diagnosis of asymmetric/anisotropic properties in rotor-bearing system[J]. Journal of Vibration&Acoustics,1996,118(1):26-29.
[12] HAN Dongju. Generalized modal balancing for non-isotropic rotor systems[J]. Mechanical Systems&Signal Processing,2007,21(5):2137-2160.
[13] NONAMI K. Response in passing through critical speed of arbitrarily distributed flexible rotor system:part 2,case with gyroscopic effect[J]. Bulletin of JSME,2008,26(217):1205-1212.
[14] WANG Shuai,WANG Yu,ZI Yangyang,et al. A 3D finite element-based model order reduction method for parametric resonance and whirling analysis of anisotropic rotor-bearing systems[J]. Journal of Sound&Vibration,2015,359:116-135.
[15] 王杰,左彦飞,江志农,等.支承非对称对双转子系统动力特性的影响规律[J].振动与冲击,2020,39(18):27-33. WANG Jie,ZUO Yanfei,JIANG Zhinong,et al. Effect of asymmetrical support on dynamic characteristics of dual-rotor system[J]. Journal of Vibration and Shock,2020,39(18):27-33.
[16] GENG Binbin,ZUO Yanfei,JIANG Zhinong,et al. A double integral method for quantitative evaluation of influence on thin-walled casing response caused by bearing uncertainties[J]. Chinese Journal of Aeronautics,2020,33(9):2372-2381.
[17] 左彦飞.航空发动机整机系统结构振动特性分析[D].北京:北京航空航天大学,2016. ZUO Yanfei. Analysis of structural vibration characteristics of aeroengine system[D]. Beijing:Beihang University,2016.