Investigation of Liquid Electrode for Micro-electro-discharge Machining

doi:10.3901/JME.2019.09.176

Abstract

Abstract: Liquid electrode for Micro-electro-discharge machining is proposed and developed to address a variety of problems associated with electrode wear. An electrically conductive liquid metal alloy, Galinstan, is supplied through a metallic capillary nozzle such that the surface of the liquid is projected over the flat bottom of the nozzle. A discharge pulse generator is connected between the liquid (through the nozzle) and the workpiece. When the nozzle tip (covered by the liquid electrode) approaches the workpiece surface, it initiates discharge pulses when the gap meets the breakdown condition so that the generated pulses can thermally remove the material. During the machining process, a liquid electrode is continuously supplied to a metallic micro capillary nozzle to eliminate the impact of liquid consumption on the removal process. Experiments show that Galinstan, can be used as the electrode material to create discharge pulses and perform microscale removal on the samples. Controlled discharge generation and scanning-mode arbitrary etching are experimentally demonstrated using the Galinstan electrodes. It is also shown that a Parylene C coating is effective for protecting the nozzle from discharging.

Key words: electrode wear, liquid electrode, micro-electro-discharge machining

CLC Number:

TG661

HUANG Ruining, XIONG Xiaogang, ZHU Erlei. Investigation of Liquid Electrode for Micro-electro-discharge Machining[J]. Journal of Mechanical Engineering, 2019, 55(9): 176-182.

References

[1] RAZALI A R,QIN Y. A Review on micro-manufacturing,micro-forming and their key issues[J]. Procedia Engineering,2013,53(7):665-672.
[2] CHAVOSHI S Z,LUO X C. Hybrid micro-machining processes:A review[J]. Precision Engineering,2015,41(7):1-23.
[3] SCHUBERT A,ZEIDLER H,KÜHN R,et al. Microelectrical discharge machining:A suitable process for machining ceramics[J]. Journal of Ceramics,2015,2015(1):1-9.
[4] OZGEDIK A,COGUN C. An experimental investigation of tool wear in electric discharge machining[J]. The International Journal of Advanced Manufacturing Technology,2006,27(5):488-500.
[5] LIU Q,ZHANG Q,ZHANG M,et al. Review of size effects in micro electrical discharge machining[J]. Precision Engineering,2016,44(4):29-40.
[6] ALIGIRI E,YEO S H,TAN P C. A new tool wear compensation method based on real-time estimation of material removal volume in micro-EDM[J]. Journal of Materials Processing Technology,2010,210(15):2292-2303.
[7] YU H L,LUAN J J,LI J Z,et al. A new electrode wear compensation method for improving performance in 3D micro EDM milling[J]. Journal of Micromechanics and Microengineering,2010,20(5):1-7.
[8] YU Z,MASUZAWA T,FUJINO M. Micro-EDM for three dimensional cavities-development of uniform wear method[J]. CIRP Annals-Manufacture Technology,1998,47(1):169-172.
[9] NGUYEN V Q,DUONG T H,KIM H C. Precision micro EDM based on real-time monitoring and electrode wear compensation[J]. International Journal of Advanced Manufacturing Technology,2015,79(9-12):1-10.
[10] YAN M T,HUANG K Y,LO C Y. A study on electrode wear sensing and compensation in Micro-EDM using machine vision system[J]. International Journal of Advanced Manufacturing Technology,2009,42(11-12):1065-1073.
[11] ZHANG Y,KANG X,ZHAO W. The investigation of discharge restriction mechanism of the floating workpiece based electrostatic field-induced electrolyte jet (E-Jet) EDM[J]. Journal of Materials Processing Technology,2017,247:134-142.
[12] ZHANG Y,HAN N,KANG X,et al. The tool electrode investigation of electrostatic field-induced electrolyte jet (E-jet) electrical discharge machining[J]. International Journal of Advanced Manufacturing Technology,2016,82(5-8):1455-1461.
[13] HASSLER C,von METZEN R,STIEGLITZ T. Deposition parameters determining insulation resistance and crystallinity of parylene C in neural implant encapsulation[C]//4th European Conference of the International Federation for Medical and Biological Engineering (IFMBE),2009,2439-2442.
[14] YOON Y,KIM D,LEE J B. Hierarchical micro/nano structures for super-hydrophobic surfaces and super-lyophobic surface against liquid metal[J]. Micro Nano System Letter,2014,2(1):3.

[1]	YUE Xiaoming, ZANG Shuo, ZHAO Yonghua, LIU Weidong, YIN Yingyue, ZHANG Qinhe. Experimental Study on EDM ECM Hybrid Processes of High-quality Small Hole with Super Depth-diameter Ratio [J]. Journal of Mechanical Engineering, 2024, 60(9): 374-382.
[2]	WANG Pai, BAI Yifan, ZHAO Wenxiang, ZHANG Yibo, LIU Zhibing. Research on Surface Integrity Evolution of Short Arc Assisted Milling of Superalloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 434-444.
[3]	CHU Xuyang, ZHOU Kesheng, ZHUANG Weihuang, ZHOU Wei. Study on EDM Method Based on Strip Electrode for Micro-channel Structure [J]. Journal of Mechanical Engineering, 2022, 58(19): 283-292.
[4]	QIU Mingbo, FU Jiongbo, DUAN Yajun, SHEN Lida, HAN Yunxiao. Study on Multi-channel Discharge Mechanism of Semiconductor Silicon Electrode [J]. Journal of Mechanical Engineering, 2019, 55(21): 208-214.
[5]	LI Shujuan, XIN Bin, YANG Yuxiang, LU Xiong, LI Yan, JIANG Bailing, JIA Zhen, LI Yuxi. Investigation of Plasma Volt-ampere Characteristics and Gap Modeling of EDM [J]. Journal of Mechanical Engineering, 2019, 55(5): 232-240.
[6]	YU Jianwu, HE Lihua, SHANG Zhentao, LUO Hong, LIANG Qihua. Experimental Investigation on Precision Electrical Discharge Dressing of Small-diameter Bronze-bonded Fine Grain Grinding Wheel [J]. Journal of Mechanical Engineering, 2019, 55(3): 199-207.
[7]	LU Xiong, LI Shujuan, XIN Bin, WU Xiaoyu, ZHAO Ziyu, LI Yan, JIANG Bailing, LI Yuxi. Modeling and Control of WEDM Process of Silicon Single Crystal [J]. Journal of Mechanical Engineering, 2018, 54(17): 149-156.
[8]	YU Jianwu, HE Lihua, DUAN Wen, SHEN Xiang, YI Cheng. Prediction Model of Technological Indexes in EDM of 8418 Steel [J]. Journal of Mechanical Engineering, 2016, 52(11): 207-212.
[9]	CHANG Weijie¹, CHEN Yuanlong¹, ZHANG Jianhua², XU Bin³, FANG Ming¹. Single Pulse Discharge Channel Expansion Laws of EDM [J]. Journal of Mechanical Engineering, 2016, 52(9): 208-212.
[10]	HONG Han, GU Lin, XU Hui, ZHAO Wansheng. Flow Field Simulation and Machining Experiment of Flank Milling Blasting Erosion Arc Machining [J]. Journal of Mechanical Engineering, 2015, 51(9): 176-183.
[11]	QIU Mingbo, LING Jiajian, CHEN Longhai, LIU Zhidong. The Mechanisms of Processing by Spark-induced Combustion with Sintered Diamond Electrode [J]. Journal of Mechanical Engineering, 2015, 51(3): 190-195.
[12]	Wu Jun;Li Minghui. RESEARCH ON WIRE ELECTRICAL DISCHARGE MACHINING STABILITY BY STATISTICAL ANALYSIS [J]. , 2001, 37(3): 89-92.
[13]	Wang Chengyong;Guo Zhongning;Chen Jun. POLISHING OF CVD DIAMOND FILMS BY EDM WITH ROTARY ELECTRODE [J]. , 2002, 38(增刊): 168-171.
[14]	DI Shichun;HUANG Ruining;CHI Guanxin; ZHAO Wansheng. KEY TECHNOLOGY OF MICRO WIRE EIECTRICAL DISCHARGE MACHINING [J]. , 2006, 42(1): 221-226.
[15]	ZHU Pailong;QI Changzheng;WEN Zhiyuan;TANG Dianbo;ZHOU Jinjin;XU Zhongyao. PROCESS APPROACH WITH ITS ELECTRODE DESIGN AND MANUFACTURING FOR DEEP MICRO-HOLE OF EXTRA LARGE ASPECT RATIO [J]. , 2006, 42(2): 198-202.