Model for Calculating the Reliability of Powder Metallurgy Turbine Disk Based on Distribution of Defects

Abstract

Abstract: In order to research the effect of micro defects on the performance of powder metallurgy (PM) turbine disk, a reliability calculation model based on the probabilistic character of distribution of defects is established by using the results of finite element analysis, which is aimed at the failure mode of crack initiation and propagation under low cycle fatigue. The model can be used to calculate the reliability of PM turbine disk under different distribution of defects and different cyclic loading conditions. Then failure analysis of a PM turbine disk indicates that the surface quality is an important factor leading to failure of PM turbine disk, and that is in good agreement with a great deal of experimental results. So the model can be used to guide the engineering design and application of PM turbine disk.

Key words: Critical size, Defects, Powder metallurgy turbine disk, Reliability

CLC Number:

V232.3

WEI Dasheng;YANG Xiaoguang;WANG Yanrong. Model for Calculating the Reliability of Powder Metallurgy Turbine Disk Based on Distribution of Defects[J]. , 2008, 44(11): 132-137.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2008/V44/I11/132

[1]	GUO Lie, GUAN Longxin, GE Pingshu, WU Xiaojian. Review on Longitudinal-lateral Motion Control of Intelligent Vehicles with Network Unreliability [J]. Journal of Mechanical Engineering, 2026, 62(8): 298-316.
[2]	LU Kaiyi, WANG Zeng, WANG Xianliang, LU Zehua, LIU Huaiju. Fatigue Reliability Analysis of Aero-engine Gear Transmission System Considering Thermal-mechanical Loads [J]. Journal of Mechanical Engineering, 2026, 62(3): 407-419.
[3]	ZHU Ruikang, JIA Qiang, WANG Yishu, ZHANG Hongqiang, MA Limin, ZOU Guisheng, GUO Fu. Application Challenges and Research Progress of Copper Sintering for Power Module Packaging [J]. Journal of Mechanical Engineering, 2026, 62(2): 115-130.
[4]	LIU Xin, LI Feihu, LIU Kai, WAN Jun. Reliability Approach for Topside Structure of Bucket Wheel Stacker Reclaimer Based on Convolutional Neural Network [J]. Journal of Mechanical Engineering, 2026, 62(2): 471-480.
[5]	SA Guodong, WANG Dong, LIU Zhenyu, SUN Jiacheng, HOU Mingjie, LI Zhinan, TAN Jianrong. Review and Prospect of Reuse Reliability Research on Non-pyrotechnic Separation Mechanism of Launch Vehicle [J]. Journal of Mechanical Engineering, 2026, 62(1): 59-78.
[6]	LI Long, ZHOU Tiansong, Lü Shengnan, YU Bing. Design and Analysis of a Electric Drive Redundant Point-type Separation Device [J]. Journal of Mechanical Engineering, 2026, 62(1): 204-215.
[7]	GAO Xiang, ZHANG Xiang, NIU Junchuan, HE Lei, WANG Zhonglong, WU Hu. Non-probabilistic Reliability Analysis and Optimization of Semi-active Suspension with Energy Harvesting Characteristic [J]. Journal of Mechanical Engineering, 2026, 62(1): 374-383.
[8]	LIAO Ding, ZHU Shunpeng, NIU Xiaopeng, HE Jinchao, WANG Qingyuan. Probabilistic Fatigue Research of Mechanical Structures: State-of-the-Art and Future Trends [J]. Journal of Mechanical Engineering, 2025, 61(8): 47-74.
[9]	DENG Wenzhang, ZHANG Qian, WU Le, YANG Wanran, YANG Chunliu. ESPN-Based Modeling of Multi-level Characterization of Flexible Manufacturing Workshop [J]. Journal of Mechanical Engineering, 2025, 61(8): 399-412.
[10]	HAN La, SHAO Kun, ZHAO Liang, ZHANG Junjie. Regulating Cutting Speed-based Suppressing Strategy of Interfacial Defects in Orthogonal Cutting of CFRP/Ti Stacks [J]. Journal of Mechanical Engineering, 2025, 61(7): 198-209.
[11]	JIANG Hongquan, ZHANG Maojie, CHENG Huyue, GAO Jianmin, YAO Huan, GAO Fuchao, GUO Xiaofeng, HE Jicheng. Fusion of Dynamic Film Evaluation Knowledge AI Model for Weld Defect Detection [J]. Journal of Mechanical Engineering, 2025, 61(6): 24-32.
[12]	ZHOU Suxia, QU Zhi, ZHANG Zhao, WU Yi. Prediction of Crack Initiation Life of EA4T Axle Steel based on Crystal Plastic Finite Element Simulation [J]. Journal of Mechanical Engineering, 2025, 61(6): 277-284.
[13]	MA Zhiyuan, CUI Zhen, KANG Da, LIU Xiaoqing, LIN Li. Multi-resolution Low-frequency Ultrasonic C-scan Quantitative Detection of Micron-level Defects in 3D Printed Nickel Base Alloy [J]. Journal of Mechanical Engineering, 2025, 61(4): 24-31.
[14]	LEI Zheng, JIANG Peng, YAO Rui, WANG Yong. Reliability Growth of FAST Actuator [J]. Journal of Mechanical Engineering, 2025, 61(3): 251-258.
[15]	TANG Qin, GAO Bin, XUE Songwen, FAN Yongzhao, WEI Yunjin, SHEN Liang. Research on Multiphysics Fusion Sensor Technology Based on Magnetic Flux Leakage-electromagnetic Acoustic Transducer [J]. Journal of Mechanical Engineering, 2025, 61(22): 17-27.

Model for Calculating the Reliability of Powder Metallurgy Turbine Disk Based on Distribution of Defects

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments