VARIANT CONFIGURATION DESIGN SUPPORTING PERSONALLIZATION PRODUCT CUSTOMIZATION

Abstract

Abstract: Product family composed of functional module instances is constructed to target various configuration schemes. A linear optimization model to combine comprehensive performances with customer’s technical needs is subsequently formulated. Consequently, a method based on the least squares approximation is advanced to support variant design, so that the trade-off between product performance and cost can be achieved. By using a typical case of mini refrigerator, the simulation results and software implementation are thus derived and the method presented here shows its validity in personalization product customization. In addition, the predictability of variant configuration design can also be realized.

Key words: Least squares approximation, Module, Personalization, Simulated annealing, Variant configuration design

CLC Number:

TH122

WANG Haijun;SUN Baoyuan;ZHANG Qiang;WANG Jijun;WEI Xiaopeng. VARIANT CONFIGURATION DESIGN SUPPORTING PERSONALLIZATION PRODUCT CUSTOMIZATION[J]. , 2006, 42(1): 90-97.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2006/V42/I1/90

[1]	LIU Shuaishuai, ZHANG Lipeng, MA Haoran, WANG Xingyu, ZHANG Junda, ZHAO Minghui, ZHEN Longxin. Chassis Coordinated Control for Corner Module Architecture Electric Vehicles with Single Wheel Overcoming Obstacle [J]. Journal of Mechanical Engineering, 2026, 62(8): 382-397.
[2]	JIA Kangkang, DU Junmin, CHEN Feiyu, SHI Jianwei, HOU Guoyi, LI Cheng. AM-1DCNN Based Automatic Recognition of Mechanical Damage in Composite Material [J]. Journal of Mechanical Engineering, 2026, 62(6): 247-256.
[3]	LI Qingming, HU Guanyang, XU Zhengzheng, ZHOU Haonan, MEI Deqing, WANG Yancheng. Design and Performance Testing of Integrated Modular Thermal Management System for Electric Vehicles [J]. Journal of Mechanical Engineering, 2026, 62(6): 292-301.
[4]	WANG Chenfei, WANG Xiaoli, ZHENG Chen. Research on Online Unbalance Identification for Ultra-high Speed Hybrid Gas Bearing-rotor System [J]. Journal of Mechanical Engineering, 2025, 61(3): 337-346.
[5]	WANG Dianxi, YANG Bo, CHENG Baozhong, DUAN Mingyu, GAO Changqing. Optimization of Parameter Coupling Change Propagation Path Based on Elite Backtracking - simulated Annealing Hybrid Algorithm [J]. Journal of Mechanical Engineering, 2024, 60(15): 316-333.
[6]	SHEN Junxian, MA Tianchi, SONG Di, XU Feiyun. Crack Damage Detection of Centrifugal Fan Blades Based on Interpretable Ensemble Selection Framework [J]. Journal of Mechanical Engineering, 2024, 60(12): 183-193.
[7]	WU Zhipeng, GAO Dedong, WANG Shan, WEI Xiaoxu, SHAO Mingxi, XIN Yuanqing. A Review on Recycling Technology of End-of-life Crystalline Silicon Photovoltaic Modules [J]. Journal of Mechanical Engineering, 2023, 59(7): 307-329.
[8]	GAO Zhigang, SHANG Xiaolong, ZHENG Dawen, WANG Tianhu, LI Peng, BAI Junhua. Heat Transfer Characteristics Analysis of Microchannel Heat Sink on Power Module with Non-uniform Heating Dissipation [J]. Journal of Mechanical Engineering, 2023, 59(4): 257-264.
[9]	Kuijie Li, Yalun Li, Xinyu Rui, Yuancheng Cao, Liyun Fan, Xuning Feng. Experimental Study on the Effect of State of Charge on Failure Propagation Characteristics within Battery Modules^* [J]. Chinese Journal of Electrical Engineering, 2023, 9(3): 3-14.
[10]	LI Da, ZHENG Haixing, ZHANG Jianrui, WU Chaohui WENG Junhua, JIANG He, XIAO Wen. Research on PID Effect and PID Repair of PV Module on Site [J]. Journal of Electrical Engineering, 2023, 18(2): 254-259.
[11]	ZHU Xingyu, CHEN Qianhong, ZHANG Bin, LIU Lidong. Analysis of Parallel Output Characteristics of Dynamic IPT System and Design Method of Current Sharing Parameters [J]. Journal of Electrical Engineering, 2023, 18(2): 70-77.
[12]	WANG Teng, LI Feng, LUO Ling, TANG Baoping. Life State Recognition of Space Rolling Bearings Based on Dual Scale Flexible Prototype Transfer Network [J]. Journal of Mechanical Engineering, 2022, 58(21): 114-125.
[13]	LI Changlong, CUI Naxin, CHANG Long, ZHANG Chenghui. Modeling and Inconsistency Analysis of Parallel-connected Battery Module with Forced-air Cooling [J]. Journal of Mechanical Engineering, 2022, 58(12): 168-179.
[14]	LIU Yandong, HU Yiwen, CHEN Nan, WANG Jingyue, SHAO Xinming, PEI Zhongchen, LIU Chuang. Study on Power Optimization Method and Coordinated Control Strategy of Optical Storage Microgrid [J]. Journal of Electrical Engineering, 2022, 17(1): 22-30.
[15]	LI Yupeng, XIE Weixing, WANG Xiaolin, REN Haibing. Module Partition Method for Complex Products Considering the Change Risk [J]. Journal of Mechanical Engineering, 2021, 57(9): 191-202.

VARIANT CONFIGURATION DESIGN SUPPORTING PERSONALLIZATION PRODUCT CUSTOMIZATION

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments