RESRARCH OF PRIMARY TECHNIQUE TO DESIGN RECONFIGURABLE SHOP FLOOR CONTROL SYSTEM

Abstract

Abstract: A reconfigurable shop floor control system based on components is introduced, related modeling method, system architecture, and components design method are recommended, finally system primary design techniques such as components classify, components partition and XML application are described. The system designed has been used to control two different types of shop floors in a machine tool company，which is configurable, scalable and reusable. The results illustrate benefits gained from the design.

Key words: Component, Reconfiguration, Shop floor control system, System design

CLC Number:

TH165 TH166

Shang Wenli;Wang Chengen;Zhang Shijie. RESRARCH OF PRIMARY TECHNIQUE TO DESIGN RECONFIGURABLE SHOP FLOOR CONTROL SYSTEM[J]. , 2005, 41(3): 86-91.

[1]	ZHANG Chunbo, WU Chengjun, YUAN Haotian. Numerical Simulation of Chemical Reaction Mechanism during Ultrafast Laser Ablation with Different Pulse Numbers under the Action of Plasma [J]. Journal of Mechanical Engineering, 2024, 60(8): 94-106.
[2]	DUAN Shuyong, YANG Jianhua, HAN Xu, LIU Guirong. Adaptive Dimensionality Reduction Method for High-dimensional Data [J]. Journal of Mechanical Engineering, 2024, 60(17): 283-296.
[3]	Zhao Minghui, Guo Haoran, Zhang Lipeng, Liu Xin. Driving Stability Control of Four-wheel Independent Steering Distributed Drive Electric Vehicle with Single Wheel Steering Failure [J]. Journal of Mechanical Engineering, 2024, 60(10): 507-522.
[4]	SONG Xueguan, LI Kunpeng, HU Zhengguo, GUO Dongming. High Performance Manufacturing: Collaborative Mechanisms for Design and Manufacturing [J]. Journal of Mechanical Engineering, 2024, 60(1): 2-12.
[5]	XUE Hongtao, DING Dianyong, LI Ruicheng, XU Xing. Feature Extraction Method Based on Component Weighted Reconstruction and Sparse NMF for Bearing Compound Faults of In-wheel Motor [J]. Journal of Mechanical Engineering, 2023, 59(9): 146-156.
[6]	TIAN Zhi-qiang, JIANG Xing-yu, YANG Guo-zhe, LIU Wei-jun, SUO Ying-qi, CHEN Ke-qiang, XING Fei. Energy Efficient Scheduling of Flexible Job Shop with Aerospace Complex Components [J]. Journal of Mechanical Engineering, 2023, 59(8): 273-287.
[7]	WU Zhipeng, GAO Dedong, WANG Shan, WEI Xiaoxu, SHAO Mingxi, XIN Yuanqing. A Review on Recycling Technology of End-of-life Crystalline Silicon Photovoltaic Modules [J]. Journal of Mechanical Engineering, 2023, 59(7): 307-329.
[8]	GAO Yicong, ZENG Siyuan, XU Junjun, ZHENG Hao, TAN Jianrong. Research on Behaviors of Functional Components Based on 4D Printing and Design of Temperature-driven Deformation [J]. Journal of Mechanical Engineering, 2023, 59(3): 189-199.
[9]	LOU Fangli, NIE Songlin, PAN Yi, JI Hui, MA Zhonghai, YIN Fanglong. Overview of Micro-small Water Hydraulic Bidirectional Pump [J]. Journal of Mechanical Engineering, 2023, 59(24): 299-311.
[10]	CUI Xiaolei, HE Jiuqiang, HAN Cong, YUAN Shijian. Hydroforming Technology of Complex Special-shaped Hollow Components by Collaborative and Variable Loadings [J]. Journal of Mechanical Engineering, 2023, 59(20): 143-153.
[11]	SONG Yanli, LIU Yujian, FANG Zhiling, WANG Xiang, LU Jue, HUA Lin, LIU Peng, YAN Jianwen. Hot Stamping Technology and Application of Ultra-high Strength Steel Components [J]. Journal of Mechanical Engineering, 2023, 59(20): 154-178.
[12]	WANG Liyong, WU Jianpeng, LI Le, WANG Huaqing, CHEN Ruihan, SHU Yuechao. Experimental Study on Friction Interface Self-healing Performance of Copper-based Powder Metallurgy Materials [J]. Journal of Mechanical Engineering, 2023, 59(18): 69-79.
[13]	TIAN Jun, YAO Songjie, HAN Baoqing, WANG Longyang, ZHANG Daxing, ZHOU Cheng, LIU Jing, WANG Zhihai, YU Kunpeng, WANG Congsi. Characterization of Flexible Wire-wound Interconnection for Microwave Component Signal Transmission and Optimized Design [J]. Journal of Mechanical Engineering, 2023, 59(17): 79-88.
[14]	YU Zongying, SHEN Gongtian, ZHAO Zhangyan, WU Zhanwen, LIU Yuan. Advances in Research of Computer Vision Structural Health Monitoring and Its Application Prospect in Large Amusement Rides [J]. Journal of Mechanical Engineering, 2023, 59(16): 167-181.
[15]	DING Jietai, LI Xiping, ZHAO Yuan, WANG Bin, LI Mengjia, DONG Weiping. Investigating on Molding Process of Steel-polyurethane Flexible Composite Components and the Interfacial Bonding Strength [J]. Journal of Mechanical Engineering, 2023, 59(14): 73-82.

RESRARCH OF PRIMARY TECHNIQUE TO DESIGN RECONFIGURABLE SHOP FLOOR CONTROL SYSTEM

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments