EFFECT OF SUBSTRATE TEMPERATURE ON PROPERTIES OF THE DIAMOND-LIKE CARBON DEPOSITED BY PULSED VACUUM ARC PLASMA DEPOSITION

Abstract

Abstract: Diamond-like carbon(DLC) films are deposited on Cr17Ni14Cu4 stainless steel and Si(100) substrates as a function of substrate temperature by pulsed vacuum arc plasma deposition. The results show that the sp3 carbon atoms content decreas as the substrate temperature increases. The microhardness of DLC films decrease when the substrate temperature increases. The DLC films which are deposited at 100℃ to 300℃ have the low friction coefficient and good wear resistance. The wear resistance of the DLC films deposites on Cr17Ni14Cu4 substrate is much better than that of Cr17Ni14Cu4 stainless steel. But the wear resistance decreases as the substrate temperature increases and the DLC film deposites at 400℃ has low wear resistance. The DLC films have good adherence with the stainless steel substrate.

Key words: Diamond-like carbon, Microhardness, Pulsed vacuum arc plasma deposition, Substrate temperature, Wear resistance, X-ray photoelectron spectroscopy

CLC Number:

TG17

Leng Yongxiang;Sun Yongchun;Sun Hong;Chen Junying;Wang Jin;Huang Nan. EFFECT OF SUBSTRATE TEMPERATURE ON PROPERTIES OF THE DIAMOND-LIKE CARBON DEPOSITED BY PULSED VACUUM ARC PLASMA DEPOSITION[J]. , 2004, 40(7): 20-23.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2004/V40/I7/20

[1]	ZHAO Jiaxin, JIN Guo, CUI Xiufang, LIU Changhao, QI Meng WU Di. Boron-lithium Water Corrosion Characteristics and Tribological Properties of CrAIX (X=Nb, Mo) Coatings on Zirconium Alloy Surfaces for Nuclear Applications [J]. Journal of Mechanical Engineering, 2025, 61(10): 178-190.
[2]	HAO Jingbin, DU Qin, NIU Qingwei, FU Tianchi, LIU Hao, YANG Haifeng, LIU Xinhua. Study on Microstructure and Properties of Ni-WC Gradient Composite Coating by Ultrasonic Assisted Laser Cladding [J]. Journal of Mechanical Engineering, 2025, 61(10): 164-177.
[3]	HE Shiwei, ZHU Lina, ZHANG Zhiqiang, Kang Jiajie. Study on the Microstructure and Properties of Laser-arc Hybrid Additive Manufacturing of Aluminum Alloys [J]. Journal of Mechanical Engineering, 2025, 61(10): 152-163.
[4]	SHI Jiadong, MA Guozheng, LI Guolu, LI Zhen, ZHAO Haichao, WANG Haidou. Research Progress on the Tribological Properties of Diamond-like Carbon Films in Typical Environments [J]. Journal of Mechanical Engineering, 2025, 61(10): 19-35.
[5]	WANG Pai, BAI Yifan, ZHAO Wenxiang, ZHANG Yibo, LIU Zhibing. Research on Surface Integrity Evolution of Short Arc Assisted Milling of Superalloy [J]. Journal of Mechanical Engineering, 2024, 60(9): 434-444.
[6]	ZHAO Erhui, SHAO Bo, QIAO Miaojie, QUAN Long, WANG Chengwen. Study on the Elastohydrodynamic Lubrication Characteristics of the Vane-stator Pair in High Pressure Vane Pump [J]. Journal of Mechanical Engineering, 2024, 60(8): 308-319.
[7]	WANG Huipeng, ZHU Penghua, SHU Fengyuan, HE Peng, LIU Cunyu. Simulation and Performance Research of Laser Cladding Temperature Field on 65Mn Steel Surface [J]. Journal of Mechanical Engineering, 2023, 59(7): 216-224.
[8]	MOU Honglin, CAI Zhihai, MA Guozheng, ZHU Xianyong, ZHOU Li, HE Pengfei, LIU Ming, WANG Haidou. Research Status and Prospect of Wear-resistant and Self-lubricating Coatings with Wide Temperature Range by Thermal Spraying [J]. Journal of Mechanical Engineering, 2023, 59(7): 139-155.
[9]	LONG Weimin, LIU Dashuang, WU Aiping, ZHONG Sujuan, WANG Decheng. Influence of Size and Content on the Wear Resistance of Induction Brazing Diamond Coating in Air [J]. Journal of Mechanical Engineering, 2023, 59(12): 225-235.
[10]	LI Jianwei, HE Zhi, LONG Jianzhou, YIN Fengliang, GAO Hongyue, ZHAO Yue, GUO Xiaolin, WANG Zhimin, LIU Yuping, ZHANG Tiejun, GUO Bin. Control of Defects in Mg Alloy Arc Additive Repair Layer by Friction Stir Treatment [J]. Journal of Mechanical Engineering, 2022, 58(4): 55-61.
[11]	SHI Yameng, LI Jingbin, ZHANG Jie, WEN Baoqin, LI Liqiao, WANG Xianfei. Effect of Process Parameters on Microstructure and Wear Resistance of 65Mn-based Cladding Ni60a/SiC Coating [J]. Journal of Mechanical Engineering, 2022, 58(16): 197-205.
[12]	SUN Wei, SONG Qingrui, LIU Kun, LIU Xiaojun, YE Jiaxin. Two-level Wear Reduction Mechanism and Molecular Dynamics Simulation for GR/PTFE Composites [J]. Journal of Mechanical Engineering, 2022, 58(13): 175-184.
[13]	ZHAO Hang, GAO Chang, WU Xiaoyu, XU Bin, LEI Jianguo. Microstructure and Tribological Properties of WC-Ni Cermet Coatings Prepared by Ultrasonic-assisted Electro-spark Powder Deposition [J]. Journal of Mechanical Engineering, 2021, 57(23): 252-261.
[14]	YIN Xiaohui, XU Fan, XU Dong, DING Jianxiang, CHEN Ji, DING Zichao, CUI Bing. Research on Microstructure and Grinding Performance of Vacuum Brazed Diamond with ZrC Reinforced Cu-Sn-Ti Composite Alloys [J]. Journal of Mechanical Engineering, 2021, 57(18): 182-189.
[15]	LI Yunfeng, SHI Yan. Investigation on Microstructure and Performance of Wear-resistant and Impact-resistant Composite Coating Produced by Laser Cladding [J]. Journal of Mechanical Engineering, 2021, 57(12): 237-246.

EFFECT OF SUBSTRATE TEMPERATURE ON PROPERTIES OF THE DIAMOND-LIKE CARBON DEPOSITED BY PULSED VACUUM ARC PLASMA DEPOSITION

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments