SHAPE OPTIMIZATION DESIGN FOR PREFORM DIE IN NON-ISOTHERMAL METAL FORMING

Abstract

Abstract: An optimization method for preform die shape in non-isothermal metal forming using plastic finite element method, sensitivity analysis and engineering optimization algorithm is presented. The preform die shape is represented by cubic B-spline. The control points of the B-spline are used as the design variables. By optimizing preform die shape, net-shape forging process can be realized, and flashless final forging with complete die fill and without defect can be obtained. The optimization procedure of preform die shape is given. The sensitivity of nodal velocity and temperature with respect to design variable is developed. Finally, the forming process of an axisymmetric disk as an optimization example is given.

Key words: Finite element method, Preform design, Sensitivity analysis, Shape optimization

CLC Number:

TG305

Ma Xinwu;Zhao Guoqun;Wang Guangchun. SHAPE OPTIMIZATION DESIGN FOR PREFORM DIE IN NON-ISOTHERMAL METAL FORMING[J]. , 2003, 39(5): 145-149.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2003/V39/I5/145

[1]	XU Zhuo, YAO Nan, GU Dawei, TAN Dapeng, LI Hui, WEN Bangchun. Research on the Nonlinear Damping Characteristics of Foam-filled All-composite Honeycomb-core Sandwich Panels [J]. Journal of Mechanical Engineering, 2026, 62(7): 308-323.
[2]	LI Lincong, WANG Shengquan, ZENG Xiang, CAI Yong, HE Xiaowei. High-order and Low-order Coupled Simulation Method for Automotive Collision and Development of a Realistic Simulation Platform [J]. Journal of Mechanical Engineering, 2026, 62(6): 314-324.
[3]	ZHANG Haitao, CHEN Zaigang, YANG Guojun, CHEN Zhihui, CHEN Xin, YANG Jizhong. Multi-parameter and Multi-objective Optimization of Mountain Rack Vehicle Suspension Based on Particle Swarm Optimization [J]. Journal of Mechanical Engineering, 2026, 62(4): 296-308.
[4]	HU Bin, ZHAO Xin, ZHANG Xin, LUO Yifei, LU Liantao, WEN Zefeng. Study on Rail Rolling Contact Fatigue Model in Consideration of Transient Rolling Contact Solutions within Wheel-rail Contact Patch [J]. Journal of Mechanical Engineering, 2026, 62(2): 354-366.
[5]	YANG Shaofei, WANG Dongliang, LI Jianqiang, ZHANG Ming, LU Songbing. Response Analysis of Landing Leg Deployment and Landing Transient Impact of Reusable Launch Vehicle [J]. Journal of Mechanical Engineering, 2026, 62(1): 159-170.
[6]	LI Cunxi, SONG Liming, GUO Zhendong, LI Jun. Knowledge Transfer Based Aerodynamic Optimization Method for Efficient Turbine Cascade Design [J]. Journal of Mechanical Engineering, 2025, 61(4): 333-343.
[7]	TIAN Shiqiao, LUO Xiangping, XIAO Chunyu, ZHOU Jinsong, GONG Dao, ZHAO Zengchuang. Comparative Assessment of Curving Performance in Active Steering and Forced Steering Bogies [J]. Journal of Mechanical Engineering, 2025, 61(22): 189-197.
[8]	HU Lei, DU Jiaqing, WANG Rui, WANG Xue. Optimization of Local Post Weld Heat Treatment Parameters for 9%Cr Heat Resistant Steel Welded Pipes [J]. Journal of Mechanical Engineering, 2025, 61(20): 113-122.
[9]	JIANG Minghong, GAO Xianghong, ZHANG Peng, ZHU Changsheng. Parametric Sensitivity Analysis and Design of Control Strategies for Active Dry Friction Dampers [J]. Journal of Mechanical Engineering, 2025, 61(20): 328-338,348.
[10]	GAO Tianxiong, YANG Liu, YAO Xudong, XIAO Shouwen, AI Chao, KONG Xiangdong. Multi-objective Optimization Design of High-speed Wet Permanent Magnet Brushless DC Motor [J]. Journal of Mechanical Engineering, 2025, 61(20): 339-348.
[11]	YANG Bing, Lü Peijin, HUANG Mian, XU Yanhui, XIAO Shoune, YANG Guangwu, ZHU Tao. Simulation of Surface Residual Stress in Railway Axles and Its Influence on Crack Propagation Behavior [J]. Journal of Mechanical Engineering, 2025, 61(18): 230-239.
[12]	CHEN Qian, DONG Xingjian, CHEN Kangkang, LIU Wenbo, YUAN Shun, WU Peigui, NI Hongbin. Peeling Force Prediction of Automobile Seat Slide Rail Based on Iterative Local Weighted Linear Regression [J]. Journal of Mechanical Engineering, 2025, 61(17): 193-204.
[13]	GUO Lei, TIAN Wenqing, CHEN Hui, CAI Chao, SHI Yusheng. Discrete Element-finite Element Coupled Simulation and Deformation Prediction Method for Powder Hot Isostatic Pressing [J]. Journal of Mechanical Engineering, 2025, 61(16): 83-91.
[14]	WEI Yuxin, SONG Hongxia, ZHANG Yuan, XUE Guanming, KANG Renke, BAO Yan, DONG Zhigang. Surface Integrity of Ultrasonic Assisted Drilling Soft Magnetic Alloy 1J22 [J]. Journal of Mechanical Engineering, 2025, 61(1): 345-359.
[15]	CHENG Hongxin, LI Luyi, ZHOU Changcong. Method for Sensitivity Analysis of the Uncertain Distribution Parameters Based on Kriging Model and Surrogate Sampling [J]. Journal of Mechanical Engineering, 2024, 60(8): 370-383.

SHAPE OPTIMIZATION DESIGN FOR PREFORM DIE IN NON-ISOTHERMAL METAL FORMING

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments