INTERFACE REACTION OF JOINT Al2O3/(Ag72Cu28)97Ti3/Ti-6Al-4V

Abstract

Abstract: Ceramic Al2O3 is bonded with Ti-6Al-4V using (Ag72Cu28)97Ti3 as filler metal at the bonding temperature of 1 073~1 173 K for 1.8 ks．The interface reaction products of joint are investigated by scanning electron microscopy(SEM)，X-ray diffraction(XRD) and energy dispersive spectroscopy (EDS)．So the interface structure is given．The formative conditions of these reaction products are also studied．It has been found that the interface structure of diffusion-bonded joints bonded under 1 123 K is Al2O3/Cu2Ti4O/ Cu4Ti3 + Cu solid solution /Ag-Cu eutectic + rich Ag phase．At the temperature of 1 173 K the interface structure is Al2O3/Cu3TiO5+ CuAl2O4/ Cu4Ti3/rich Ag phase + Cu4Ti3．

Key words: Brazing, Ceramic, Interface structure, Ti-6Al-4V

CLC Number:

TG454

Yu Zhishui;Wu Mingfang;Qi Kai;Wang Fengjiang. INTERFACE REACTION OF JOINT Al2O3/(Ag72Cu28)97Ti3/Ti-6Al-4V[J]. , 2002, 38(2): 31-34.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2002/V38/I2/31

[1]	ZHAO Wei, CHANG Jiajun, WEI Qingsong, WU Jiamin, YE Chunsheng, HUANG Shuangjun. Influence of Silicon Nitride Combined with Silica Sol Infiltration on the Properties of Alumina Ceramic Cores via Binder Jetting [J]. Journal of Mechanical Engineering, 2026, 62(5): 287-296.
[2]	CAI Yonggen, SHI Changgen, WU Xiaoming, SUN Zerui, LUO Xuchuan. TA2/Al1060/SiC/Al5083 Ceramic Composite Armor: Explosive Welding and Characteristics [J]. Journal of Mechanical Engineering, 2026, 62(4): 203-214.
[3]	ZHAN Yuanxin, LIN Qinlong, LIU Yang, GAO Ying, WU Jianming, ZHANG Jiazheng. Advances in Machine Learning for Additive Manufacturing of Ti-6Al-4V [J]. Journal of Mechanical Engineering, 2026, 62(3): 86-103.
[4]	CAI Jili, SHI Lei, YU Huzhe, HE Zilin, LIU Ziyi, CAI Chao, SHI Yusheng. Additive Manufacturing Research Status and Development of High-temperature Ceramic Microchannel Heat Exchangers [J]. Journal of Mechanical Engineering, 2026, 62(3): 125-136.
[5]	HUANG Chuanzhen, ZHANG Renkai, WANG Zhen, XU Longhua, HUANG Shuiquan, QU Meina, XU Zhengkai, ZHANG Dijia, GUO Baosu, JIN Tianye, WANG Xiaodan. Research on Preparation and Properties of Ceramic Slurries with High Solid Content/low Viscosity [J]. Journal of Mechanical Engineering, 2026, 62(3): 260-270.
[6]	WU Jing, ZHOU Kun, JIANG Guiyun, HUANG Yun. Mechanism and Evaluation of Process Performance during Laser-induced Ablation Assisted Belt Grinding of SiC_f/SiC Composites [J]. Journal of Mechanical Engineering, 2026, 62(1): 395-407.
[7]	WANG Dada, XU Haitao, LIU Ping, JIN Xia, Lü Chuanyang, HE Yanming. Optimization of Residual Stress in AlN-Cu Brazing Joint Based on Heterogeneous Interlayer [J]. Journal of Mechanical Engineering, 2025, 61(8): 98-106.
[8]	GAO Teng, XU Wenhao, ZHANG Yanbin, LIU Mingzheng, XU Peiming, AN Qinglong, WANG Yiqi, WANG Dazhong, LI Changhe. Research Progress on Analytical Modeling and Control Process Strategy of Grinding Force for Fiber-reinforced Composites [J]. Journal of Mechanical Engineering, 2025, 61(7): 49-76.
[9]	XU Xiqing, LI Shiyuan, YANG Yongkang, ZHOU Yulong, NIU Shuxin, LI Xin. 3D Printing and Dimensional Accuracy Control of Ceramic Cores Reinforced by Alumina Fibers [J]. Journal of Mechanical Engineering, 2025, 61(5): 323-329.
[10]	FANG Zhiqiang, ZHANG Yangze, WU Jiamin, MAO Chen, CHEN Ying. Effect of Ferrocene Content on the Properties of SLS-CVR Formed SiC_nw/SiC Absorbing Ceramics [J]. Journal of Mechanical Engineering, 2025, 61(23): 321-330.
[11]	YANG Jia, ZHANG Shouzhuang, LU Xuan, XU Xin, WANG Ce, LIN Panpan, MEI Han, LIU Yue, HE Peng, LIN Tiesong. Study of Copper-based Composite Brazing Process of SiC_f/SiC Composites with Cobalt-based High Temperature Alloys [J]. Journal of Mechanical Engineering, 2025, 61(21): 437-445.
[12]	LIU Fuchu, WANG Miao, ZHANG Chi, LIN Xuexiong. Synergistic Optimization of Porosity and Flexural Strength of Alumina Porous Ceramics Fabricated by 3D Printing Method Based on Response Surface Methodology [J]. Journal of Mechanical Engineering, 2025, 61(19): 386-396.
[13]	LIU Lifei, LIANG Fengshuang, WU Mingyang, ZHANG Mingde. Study on the Damage Formation Mechanism of RB-SiC Ceramics Based on Dynamic Indentation [J]. Journal of Mechanical Engineering, 2025, 61(13): 449-460.
[14]	XIAO Junyi, HE Pengfei, XUE Lin, SUN Chuan, LIANG Xiubing, CHENG Jiangbo. Research Progress in Carbide Ultra-high Temperature Ceramics for Equipment Thermal Protection [J]. Journal of Mechanical Engineering, 2025, 61(10): 1-18.
[15]	DONG Zhigang, WANG Zhongwang, RAN Yichuan, BAO Yan, KANG Renke. Advances in Ultrasonic Vibration-assisted Milling of Carbon Fiber Reinforced Ceramic Matrix Composites [J]. Journal of Mechanical Engineering, 2024, 60(9): 26-56.

INTERFACE REACTION OF JOINT Al2O3/(Ag72Cu28)97Ti3/Ti-6Al-4V

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments