STUDY ON EDGE STRESSES OF LAYERED VESSEL USING FLAT RIBBON WOUND CYLINDRICAL SHELL

Abstract

Abstract: The edge stresses both in flat ribbon layer and inner shell for layered pressure vessel are studied, and them with those in mono-layered shell is contrasted. It is shown that there are no edge stresses but even stresses in flat ribbon layer. Meanwhile, their stresses are independent of each other because of the separation of ribbons from each other (not entirety as a cylinder).

Key words: Flat ribbon wound, Pressure vessel, Stress, ASP flooding, De-gas and de-sand, Numerical simulation, Separation, Viscosity, Hydrocyclone

CLC Number:

TH49

Zhu Ruilin. STUDY ON EDGE STRESSES OF LAYERED VESSEL USING FLAT RIBBON WOUND CYLINDRICAL SHELL[J]. , 2000, 36(9): 107-109.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2000/V36/I9/107

[1]	LI Zixuan, LI Hongji, XU Zhixiang, NIU Hui, JI Ce, WANG Tao. Research on the Bonding Forming Mechanism of Carbon Steel/Stainless Steel Bimetallic Tubes with Three-roll Corrugated Skew Rolling [J]. Journal of Mechanical Engineering, 2026, 62(6): 174-184.
[2]	WEI Zhaocheng, ZENG Wen, SHI Ning, FANG Yuxin, LI Jiasheng, GUO Minglong. Development of a Highly Repeatable Control Method Based on Ultrasonic Stress Measurement and Its Application [J]. Journal of Mechanical Engineering, 2026, 62(6): 209-219.
[3]	SHI Yingjie, XU Ke, LEI Tairan, ZHANG Yi. Stress Detection Method for Steel Plates Using Shear Wave Birefringence with Electromagnetic Acoustic Transducer [J]. Journal of Mechanical Engineering, 2026, 62(6): 257-266.
[4]	ZHENG Wenjian, HU Minghui, YU Yang, FENG Daochen, YAN Dejun, YANG Jianguo. Study on the Influence of Softening Behavior of High Magnesium Aluminum Alloy Welded Joint on Welding Residual Stress [J]. Journal of Mechanical Engineering, 2026, 62(4): 180-189.
[5]	CAI Yonggen, SHI Changgen, WU Xiaoming, SUN Zerui, LUO Xuchuan. TA2/Al1060/SiC/Al5083 Ceramic Composite Armor: Explosive Welding and Characteristics [J]. Journal of Mechanical Engineering, 2026, 62(4): 203-214.
[6]	HUANG Chuanzhen, ZHANG Renkai, WANG Zhen, XU Longhua, HUANG Shuiquan, QU Meina, XU Zhengkai, ZHANG Dijia, GUO Baosu, JIN Tianye, WANG Xiaodan. Research on Preparation and Properties of Ceramic Slurries with High Solid Content/low Viscosity [J]. Journal of Mechanical Engineering, 2026, 62(3): 260-270.
[7]	WANG Yongqiang, ZHANG Houchao, HUANG Junjie, LI Hongke, ZHU Xiaoyang, YANG Jianjun, LAN Hongbo. Low-cost Fabrication of High-precision Conformal Films Based on Pneumatic/Electrical/Thermal Synergistically Driven Jetting Micro-3D Printing [J]. Journal of Mechanical Engineering, 2026, 62(3): 298-310.
[8]	YAO Shuai, DAI Juchuan, Lü Weirong. Research on Cable Force Detection Technology for Hybrid Tower Cables of Wind Turbines Based on the Frequency Method [J]. Journal of Mechanical Engineering, 2026, 62(2): 385-396.
[9]	SUN Haichao, LI Yalin, WANG Xikun, TAO Xianming. Experimental and Numerical Study on the Impinging Performance of Coaxial Water-water Jet [J]. Journal of Mechanical Engineering, 2026, 62(2): 445-454.
[10]	PAN Qinxue, ZHAO Guangyuan, YU Haoshen, XU Jiaqi. Research on Stress Detection Method of Carbon Fiber Composites Based on Critical Refraction Longitudinal Wave [J]. Journal of Mechanical Engineering, 2026, 62(2): 48-60.
[11]	LIANG Wei, LI Xixian, DENG Dean. Investigation on Influence of Welding Deformation on Bearing Capacity of Large Thin-plate Structure [J]. Journal of Mechanical Engineering, 2026, 62(2): 170-180.
[12]	XU Ning, SUN Zhanyong, YANG Chao, REN Zunsong, YANG Guangxue, ZHOU Yichang, QU Sheng. Experimental Study on Fatigue Damage Characteristics of Equipment Compartment Bottom Plates of EMU [J]. Journal of Mechanical Engineering, 2026, 62(2): 250-260.
[13]	LI Yumei, CHEN Jian, LI Yaguan, CHEN Yunzhi, NIE Zhenguo. 3D Global Residual Stress Field Prediction of Direct Energy Deposition Workpiece Based on Graph Neural Networks [J]. Journal of Mechanical Engineering, 2026, 62(1): 421-435.
[14]	LIN Hanxin, LIU Caishan. Review of Dynamical Analysis Methods for Launch Vehicle Mechanisms [J]. Journal of Mechanical Engineering, 2026, 62(1): 41-58.
[15]	SA Guodong, WANG Dong, LIU Zhenyu, SUN Jiacheng, HOU Mingjie, LI Zhinan, TAN Jianrong. Review and Prospect of Reuse Reliability Research on Non-pyrotechnic Separation Mechanism of Launch Vehicle [J]. Journal of Mechanical Engineering, 2026, 62(1): 59-78.

STUDY ON EDGE STRESSES OF LAYERED VESSEL USING FLAT RIBBON WOUND CYLINDRICAL SHELL

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments