MEASUREMENT OF RESIDUAL STRESSES ON GRINDING SURFACE BY THREE DIRECTIONAL GRATING AND MOIRE INTERFERENCE

Abstract

Abstract: The performances of parts are influenced intricately by residual stresses on grinding surface. Because of the random of residual stresses, it is difficult to determine in theory. One kind of three directional grating is made, by means of Moire interference technique and hole-drilling, a new method about residual stresses measurement is developed, and what about the residual stresses on grinding surface is contributed.

Key words: Grinding, Measurement, Moire interference, Residual stresses, Three directional grating, Cold rolling, Composite interface, Tensile strength, Specific tensile strength, Stainless steel wire mesh reinforced aluminium composite plate

CLC Number:

O348

Chen Jubing;Yu ZhengYue. MEASUREMENT OF RESIDUAL STRESSES ON GRINDING SURFACE BY THREE DIRECTIONAL GRATING AND MOIRE INTERFERENCE[J]. , 2000, 36(6): 102-105.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y2000/V36/I6/102

[1]	WEI Zhaocheng, ZENG Wen, SHI Ning, FANG Yuxin, LI Jiasheng, GUO Minglong. Development of a Highly Repeatable Control Method Based on Ultrasonic Stress Measurement and Its Application [J]. Journal of Mechanical Engineering, 2026, 62(6): 209-219.
[2]	DENG Jiadong, GUAN Shanyue, WANG Xiaokai, QIAN Dongsheng, LIU Chao, LIU Wei, HUA Lin. Development and Application of Network Collaborative and Intelligent Ring Rolling Technology for High-end Equipment Large Rings [J]. Journal of Mechanical Engineering, 2026, 62(6): 65-86.
[3]	CHEN Nan, XIAO Zihan, YU Chao, QI Zichen, REN Zhongkai, XIAO Hong. Modeling Method of Cold Rolling Compounding Process of Heterogeneous Metals and Analysis of Compounding Mechanism [J]. Journal of Mechanical Engineering, 2026, 62(6): 132-141.
[4]	YANG Yinru, GAO Hang, TIAN Yachuang, LIU Jianbao. Experimental Study on Ultrasonic Welding Technology of High Temperature Resistant Thermoplastic Carbon Fiber Composites [J]. Journal of Mechanical Engineering, 2026, 62(5): 297-305.
[5]	CHEN Xiaotong, LI Zhonghao, YANG Min, KONG Xianggang, LIU Mingzheng, LI Benkai, MA Xiao, CUI Xin, DAMBATTA Y S, YU Zhenwei, WANG Guang, LI Changhe. Modeling and Experimental Study of Droplet Spreading at the Microabrasive/Bone Interface of Bionic Desert Beetles [J]. Journal of Mechanical Engineering, 2026, 62(5): 329-346.
[6]	GU Lianrui, GUO Guoqiang, JIANG Renzheng, WU Tiange, KE Shuai, KONG Zhixue, ZHAO Huan. Current Situation and Development of Path Planning and Force Position Control Technology for Robot Grinding with Thin-walled and Complex Structures [J]. Journal of Mechanical Engineering, 2026, 62(5): 117-132.
[7]	JIN Yusheng, DING Jianjun, LI Changsheng, LIU Yangpeng, LIU Xindong. Angle-error Separation and Self-calibration at Arbitrary Angular Positions for Circular Grating Encoders [J]. Journal of Mechanical Engineering, 2026, 62(4): 25-36.
[8]	LI Xiaohua, LI Xu, HAN Yuejiao, WANG Pengfei, ZHANG Dianhua, ZHANG Yong. Prediction and Regulation of Multi-pass Coupled Modeling for Cold Rolling of High-strength Strip Based on Genetic Inheritance of Property Inhomogeneity [J]. Journal of Mechanical Engineering, 2026, 62(4): 135-147.
[9]	HAN Wenkang, ZHAO Jinfu, LIU Zhanqiang, WANG Bing, WANG Pengyang, SONG Qinghua, REN Xiaoping, WANG Zhaoxin. Review of Temperature Measurement Methods Based on Thermoelectric Sensors and Current Status of Their Application in Intelligent Cutting Tools [J]. Journal of Mechanical Engineering, 2026, 62(2): 17-34.
[10]	WU Jing, ZHOU Kun, JIANG Guiyun, HUANG Yun. Mechanism and Evaluation of Process Performance during Laser-induced Ablation Assisted Belt Grinding of SiC_f/SiC Composites [J]. Journal of Mechanical Engineering, 2026, 62(1): 395-407.
[11]	CHEN Bochuan, ZHANG Chong, LI Qilin, GAO Xiaoxing, YUAN Songmei. Investigation of Abrasive Grains Cutting Characteristics in Micro-hole Helical Grinding Process [J]. Journal of Mechanical Engineering, 2025, 61(9): 142-156.
[12]	YANG Hao, XIE Jin, CHEN Jiaxin, CHEN Zhaojie, HE Quanpeng. Development of Dry Grinding Control System for Diamond Cutting-to-burnishing Titanium Alloy Process [J]. Journal of Mechanical Engineering, 2025, 61(9): 168-177.
[13]	SUN Jingang, YANG Min, YANG Yuying, ZHANG Yanbin, Y S DAMBATTA, ZHOU Zongming, LI Changhe. Ultrasonic Micro-grinding Biological Bone Non-uniform Heat Source Temperature Field Model and Experimental Verification [J]. Journal of Mechanical Engineering, 2025, 61(9): 178-198.
[14]	CAO Jianguo, WANG Leilei, ZHANG Zhaoxiang, CAO Yuan, WANG Ben, GAO Bo. VCR Roll Contour Design and Shape Control Capability Based on Particle Swarm Optimization [J]. Journal of Mechanical Engineering, 2025, 61(8): 75-84.
[15]	GAO Teng, XU Wenhao, ZHANG Yanbin, LIU Mingzheng, XU Peiming, AN Qinglong, WANG Yiqi, WANG Dazhong, LI Changhe. Research Progress on Analytical Modeling and Control Process Strategy of Grinding Force for Fiber-reinforced Composites [J]. Journal of Mechanical Engineering, 2025, 61(7): 49-76.

MEASUREMENT OF RESIDUAL STRESSES ON GRINDING SURFACE BY THREE DIRECTIONAL GRATING AND MOIRE INTERFERENCE

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments