CENTRIFUGAL CLUTCH WITH ORTHOGONAL FORCE AMPLIFIER

Abstract

Abstract: Two kinds of centrifugal clutch with orthogonal force amplifier, toggle force amplifier and wedge force amplifier, are made known to the public. Their operation principle is introduced. The designing calculation formulas of output force and driving torque, joint angular velocity and joint speed, rated angular velocity and rated speed, and maximum load of spring, are given out. The manufacturing cost of a centrifugal clutch with orthogonal force amplifier is a little bit more than that of commonly used centrifugal clutch and its driving torque is much bigger than that of a conventional one.

Key words: Centrifugal force, Clutch, Orthogonal force amplifier, Weight

CLC Number:

TH133.4

Zhong Kangmin;Guo Peiquan;Hu Bingchen. CENTRIFUGAL CLUTCH WITH ORTHOGONAL FORCE AMPLIFIER[J]. , 2000, 36(4): 38-40.

[1]	YANG Yang, WANG Zekui, CHEN Chen, MA Hua, YANG Zhinan, ZHANG Fucheng. Effect of Ni and Cu Alloying on Microstructure and Mechanical Properties of Fe-Mn-Al-C Austenitic Lightweight Steel [J]. Journal of Mechanical Engineering, 2024, 60(8): 154-164.
[2]	LI Kun, JI Chen, BAI Shengwen, JIANG Bin, PAN Fusheng. Research Status and Prospects of Wire-arc Additive Manufacturing Technology for High-performance Magnesium Alloys [J]. Journal of Mechanical Engineering, 2024, 60(7): 289-311.
[3]	LIU Kuo, JIANG Yeming, HUANG Renjie, LI Mingyu, CHEN Hu, WANG Yongqing. Research on High-efficiency Adaptive Machining Technology of Machine Tools Considering Online Chatter Suppression [J]. Journal of Mechanical Engineering, 2024, 60(6): 104-113.
[4]	ZHANG Yue, LU Yan, PENG Ruitao, ZHU Linwei, LEI Bei, JIANG Jiachuan. New Connection Technology and Application Status of Lightweight Materials [J]. Journal of Mechanical Engineering, 2024, 60(4): 259-283.
[5]	ZONG Huaizhi, AI Jikun, ZHANG Junhui, JIANG Lei, TAN Shujie, LIU Yuxian, SU Qi, XU Bing. Lightweight Design of Limb Leg Units for Hydraulic Quadruped Robots by Topology Optimization and Lattice Filling [J]. Journal of Mechanical Engineering, 2024, 60(4): 420-429.
[6]	NING Fangli, DENG Zongling, YAO Keqiang, WEI Min. Non-synchronous Measurements of Sound Source Localization Based on Weighted Nuclear Norm Minimization [J]. Journal of Mechanical Engineering, 2024, 60(3): 120-130.
[7]	PAN Haiyang, XU Haifeng, ZHENG Jinde, TONG Jinyu, ZHANG Feibin. Mechanical Fault Diagnosis Method Based on Twin Weighted Imbalanced Matrix Classifier [J]. Journal of Mechanical Engineering, 2024, 60(3): 170-180.
[8]	DU Wenliao, YANG Lingkai, WANG Hongchao, GONG Xiaoyun, ZHAO Feng, LI Chuan. Multiscale Dynamic Weighted and Multilevel Residual Convolution Autoencoder Based Rotating Mechanical Signals Denoising [J]. Journal of Mechanical Engineering, 2024, 60(18): 53-63.
[9]	LI Zhipeng, MA Tianyu, LIU Jinping, XIANG Qingsong, TANG Junjie. Multi-source Domain Adaptation Intelligent Fault Diagnosis Method Based on Asymmetric Adversarial Training [J]. Journal of Mechanical Engineering, 2024, 60(18): 76-88.
[10]	HUANG Baoyu, ZHANG Yongxiang. Rolling Element Bearing Fault Diagnosis Using a Three-step Scheme [J]. Journal of Mechanical Engineering, 2024, 60(14): 51-68.
[11]	YU Xiaoxia, TANG Baoping, WEI Jing, ZHANG Zhigang. Fault Diagnosis for Aero-engine Accessory Gearbox by Mechanism Constraint Graph Weight Enhancement Networks under the Large Revolution Fluctuations [J]. Journal of Mechanical Engineering, 2024, 60(12): 126-136.
[12]	ZHU Jihong, ZHANG Yifei, HOU Jie, LI Xiangji, ZHANG Weihong. Topology and Free Size Collaborative Optimization Design of Antenna Pedestal Considering Dynamic Response [J]. Journal of Mechanical Engineering, 2024, 60(11): 20-31.
[13]	SHI Guanghui, WU Wenhua, TAO Ran, LUO Junrong, LIN Ye, LI Qiang, LIN Xiaohu, SUN Qidong. Application Requirement Analysis of Additive Manufacturing Technology in Aircraft Structure [J]. Journal of Mechanical Engineering, 2024, 60(11): 74-84.
[14]	LI Zhengqi, LIU Changzhao, SONG Jian, WANG Lei. Electromechanical Cooperative Design of Permanent Magnet Synchronous Generator-gear Transmission System for Improving Annual Cycle Efficiency [J]. Journal of Mechanical Engineering, 2024, 60(1): 296-308.
[15]	XUE Hongtao, DING Dianyong, LI Ruicheng, XU Xing. Feature Extraction Method Based on Component Weighted Reconstruction and Sparse NMF for Bearing Compound Faults of In-wheel Motor [J]. Journal of Mechanical Engineering, 2023, 59(9): 146-156.

CENTRIFUGAL CLUTCH WITH ORTHOGONAL FORCE AMPLIFIER

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments