| [1] |
JIANG Yunlu, CHEN Jing, KAN Ying, WU Changzhong, CHEN Huaining.
Mechanical Properties and Microstructure Evolution of 310S Austenitic Stainless Steel Welded Joint at High Temperature
[J]. Journal of Mechanical Engineering, 2024, 60(12): 250-258.
|
| [2] |
YIN Shaohua, ZHANG Zhenhua, SUN Zhiqiang, LUO Zhen.
Long-term High Temperature Aging on the Microstructure of T23 Water-cooled Wall Welds Influences
[J]. Journal of Mechanical Engineering, 2024, 60(12): 277-286.
|
| [3] |
DU Wenbo, LI Xiaoliang, LI Xia, HU Shenheng, ZHU Sheng.
Research Status of Additive Friction Stir Deposition Process
[J]. Journal of Mechanical Engineering, 2024, 60(7): 374-384.
|
| [4] |
CHEN Zhixu, LI Chenxing, YANG Chunli.
Research on Robotic Gas Tungsten Arc and Wire-Based Deposition Process for Repairing Damaged Blades
[J]. Journal of Mechanical Engineering, 2024, 60(6): 187-196.
|
| [5] |
CUI Guihan, YANG Chunli.
Strengthening and Toughening Mechanism of Weld Metals on GMAW-P of High Strength and High Toughness Welding Wire
[J]. Journal of Mechanical Engineering, 2024, 60(4): 326-334.
|
| [6] |
FAN Ding, LI Dequan, HOU Yingjie, HUANG Jiankang, FENG Yi.
Numerical Analysis of the Coupled Arc-weld Pool Behaviors in GMAW Buried-arc Welding
[J]. Journal of Mechanical Engineering, 2024, 60(2): 159-167.
|
| [7] |
LI Yuanbo, ZHENG Wenxing, YE Tao, MA Shuaichuan, ZHAO Xilong.
Influence of Pulsed Current for Heating Characteristic of Groove in Ultra-narrow Gap Welding with Sheet Tungsten Electrode Arc Constricted by Insulating Solid Wall
[J]. Journal of Mechanical Engineering, 2023, 59(22): 302-311.
|
| [8] |
LIN Zhongqin, MA Yunwu, XIA Yujun, LI Yongfeng, LI Shuhui, LI Yongbing.
Advances in Forming and Joining Processes of Lightweight High-strength Thin-walled Vehicle Structures
[J]. Journal of Mechanical Engineering, 2023, 59(20): 1-17.
|
| [9] |
LI Bobo, LIU Jingchi, LI Xiaoqiang, QIU Chenghong, LU Bingheng.
Experimental Study on 3D Printing of Fe-based Amorphous Ribbon Based on Electric Pulse
[J]. Journal of Mechanical Engineering, 2023, 59(15): 247-254.
|
| [10] |
FENG Xiaohui, GAO Fei, ZHAO Yang, GUAN Xuefei, HE Jingjing, LIN Jing.
Research on Fatigue Performance of Low Carbon Steel by Wire and Arc Additive Remanufacturing
[J]. Journal of Mechanical Engineering, 2023, 59(14): 151-158,168.
|
| [11] |
ZHANG Gang, XU Zilong, SHI Yu, ZHU Ming, FAN Ding.
Analysis of Arc-weld Pool Behavior of Double-Frequency Modulated Pulse TIG Root Pass Welding
[J]. Journal of Mechanical Engineering, 2023, 59(12): 245-252.
|
| [12] |
YAN Yangyu, HU Jinlong, HAN Qifei, GUO Yueling, SU Jiangzhou, HE Zhi, WANG Zhimin, LIU Changmeng.
Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Alloy Fabricated by Hot-wire Arc Additive Manufacturing
[J]. Journal of Mechanical Engineering, 2023, 59(11): 242-252.
|
| [13] |
ZHOU Dan, WANG Pengcheng, ZHANG Tengfei, SONG Shouxu.
Correlation Between the Color Difference and Joint Performance of Recycling ZL101A Alloy Repaired by TIG
[J]. Journal of Mechanical Engineering, 2023, 59(7): 398-406.
|
| [14] |
XU Guo-min, DIAO Guo-ning, WANG Ze-li, LIU Li-ming.
Study on Triple-wire Indirect Arc Welding of Medium and Thick Plates with Different Polarity
[J]. Journal of Mechanical Engineering, 2022, 58(22): 219-226.
|
| [15] |
LI Bobo, LI Xiaoqiang, WANG Lei, WEI Pei, LU Bingheng.
Experimental Research of High-finish-surface AM Using Fine Wire Feed Deposition Process
[J]. Journal of Mechanical Engineering, 2022, 58(21): 297-305.
|
