VIBRATION ISOLATION TECHNIQUES FOR FORGING HAMMER AND PRESS

Abstract

Abstract: The vibration isolation techniques for forging hammer and press are presented. It is possible to improve the working condition of workers, to decrease the cost of workshop building, to protect the residancial environment and to increase the utilization rate of workshop area by using the vibration isolation techniques, that the elastic and damping componants are mounted between the machine and its foundation in order to absorb the vibration energy of the machine and prevent the vibration from transmitting in all directions.

Key words: Forging hammer, Press, Vibration isolation technique

CLC Number:

TG312

Yang Guotai;He Chenghong;Jie Xiaoping. VIBRATION ISOLATION TECHNIQUES FOR FORGING HAMMER AND PRESS[J]. , 1997, 33(1): 105-110.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1997/V33/I1/105

[1]	WANG Zedong, HE Yingqi, DAI Yanjun, TAO Wenquan, WANG Yungang. Experimental Study on Cavitation Flow Characteristics in Orifice Plate under High Pressure Conditions [J]. Journal of Mechanical Engineering, 2026, 62(6): 370-379.
[2]	YANG Fei, ZHAO Lei, GE Lei, WANG Xiaohu, QUAN Long, XIONG Xiaoyan. Composite Pressure Control Method of Electro Hydraulic Power Source Based on Pressure Closed Loop Feedback and Speed Compensation [J]. Journal of Mechanical Engineering, 2026, 62(6): 400-408.
[3]	HUANG Xiaomin, GUO Tong, QUE Fumin, LI Xinming, LIU Hao, LIN Tianliang. Novel Configuration of High-pressure Radial Piston Motor with Plate Pilot Pressure Control for Two-stage Flow Distribution and Its Volumetric Efficiency Characteristics [J]. Journal of Mechanical Engineering, 2026, 62(6): 409-418.
[4]	ZHAO Penghao, LIU Jianhua, GONG Hao, WANG Xingjie. Sub-regional Virtual Material Equivalent Modeling of Joint Interface Based on Fractal Contact Theory and Semi-analytical Method [J]. Journal of Mechanical Engineering, 2026, 62(5): 230-243.
[5]	ZHANG Yanjie, XU Zhihui, LI Yu, WANG Tao, YANG Quan, JIANG Ruipeng, WANG Wei. Research on Rapid Photoacoustic Imaging Method of Corrugated Composite Plate Interface Based on Adaptive Compressive Sensing [J]. Journal of Mechanical Engineering, 2026, 62(4): 61-74.
[6]	QIU Bo, SUN Biao, AO Xiaohui, XING Shuming, WANG Dong. Effect of Squeeze Casting Pressure on Interfacial Bonding Properties of ZTA/HCCI Composites [J]. Journal of Mechanical Engineering, 2026, 62(2): 195-206.
[7]	JIANG Yiping, CHI Maoru, GUO Shun. Influence of Longitudinal Compressive Coupler Force on the Derailment of the Empty Freight Train in the Turnout Switch Area [J]. Journal of Mechanical Engineering, 2026, 62(2): 238-249.
[8]	LIU Fangbo, XIAO Xinbiao, ZHANG Jie, YANG Jizhong. Study on the Vibro-acoustic Characteristics of Pantograph Flat Roof of High-speed Train Body under Aerodynamic Excitation [J]. Journal of Mechanical Engineering, 2026, 62(2): 261-270.
[9]	WEI Renlei, MA Hongpeng, WU Shuai, CHEN Taiqi, JIAO Zongxia. Asymmetric Variable Damping Characteristics of Two-stage Telescopic Hydraulic Damper [J]. Journal of Mechanical Engineering, 2026, 62(1): 182-194.
[10]	LI Jing, XU Tianhao, LUO Ming. A Review of Aero-engine Compressor Blade Cutting Technology for High Fatigue Performance [J]. Journal of Mechanical Engineering, 2025, 61(9): 23-45.
[11]	ZHANG Pengfei, AN Chenhui, LI Wenjun, FENG Kai. Overview and Prospect on Ground Effect Simulation Technology of Aircraft and Vehicles [J]. Journal of Mechanical Engineering, 2025, 61(9): 314-334.
[12]	CAI Jinhu, RONG Jianhua, DING Huibing, ZHAO Lei, ZHANG Mingjun, ZHAO Zhijun. Topology Optimization of Strut and Tie Structures with Multiple Tensile/compressive Asymmetry Materials [J]. Journal of Mechanical Engineering, 2025, 61(9): 449-460.
[13]	YAO Jing, ZHANG Hao, SONG Yingzhe, WANG Pei. Composite Passive Stabilizer Structure Design for Pressure Pulsation of Digital Valve Package [J]. Journal of Mechanical Engineering, 2025, 61(8): 344-351.
[14]	SU Youliang, WEN Tianhao, MENG Zhijian, LIU Junqiang, ZHANG Bo. Wear Mechanism and Wear Suppression at the Nanoscale of Diamond Tools in Cutting CFRP [J]. Journal of Mechanical Engineering, 2025, 61(7): 181-197.
[15]	HAN La, SHAO Kun, ZHAO Liang, ZHANG Junjie. Regulating Cutting Speed-based Suppressing Strategy of Interfacial Defects in Orthogonal Cutting of CFRP/Ti Stacks [J]. Journal of Mechanical Engineering, 2025, 61(7): 198-209.

VIBRATION ISOLATION TECHNIQUES FOR FORGING HAMMER AND PRESS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments