RESEARCH ON INTERNAL CRACKS IN FORGING OF THE FLAT INGOT OF HIGH-STEELS

Abstract

Abstract: The forging process of the high-seed stee1s having been simulated and researched by the rigid-viscoplastic FEM in the microcomputer, the reason that cracks may occur at the center area of the billet is the existence of the double bulging in the forging process. When it was forged to plat, high cross tensile stress in the billet developed and exceeded the strength of the billet. Acoordingly, the reasonable parameters and the steps made the forging technology better were put forward, and the results analyzed by rigidviscoplastic FEM were corresponding to practical resulus.

Key words: Crack, FEM, Flat ingot forging, High-speed steel, Rigid -viscoplastic

Zhou Jie;Su Changqing;Jin Weidong;Lu Erie;Chen Hongbing. RESEARCH ON INTERNAL CRACKS IN FORGING OF THE FLAT INGOT OF HIGH-STEELS[J]. , 1996, 32(5): 30-35，4.

Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks

URL: http://www.cjmenet.com.cn/EN/

http://www.cjmenet.com.cn/EN/Y1996/V32/I5/30

[1]	SHI Nannan, GAO Haitao, TANG Leqian, KONG Charlie, YU Hailiang. Investigation on AA7075 Strips Subjected to Cryorolling and Cryogenic Treatment and Their Fatigue Crack Propagation Performance [J]. Journal of Mechanical Engineering, 2026, 62(6): 47-64.
[2]	ZHANG Shuyue, WANG Wenjian, LIN Qiang, GUO Jun, LIU Qiyue, Maksym Spriyagin, Qing Wu. Effect of Surface Defect Spacing and Alignment on Rail Rolling Contact Fatigue Damage [J]. Journal of Mechanical Engineering, 2025, 61(6): 194-205.
[3]	ZHOU Suxia, QU Zhi, ZHANG Zhao, WU Yi. Prediction of Crack Initiation Life of EA4T Axle Steel based on Crystal Plastic Finite Element Simulation [J]. Journal of Mechanical Engineering, 2025, 61(6): 277-284.
[4]	YANG Yicheng, SONG Zhiheng, ZHANG Beixuan, DUAN Chaopeng, MI Zhaoguo, BI Yance, YANG Weihua. Research on Radial Crack Evolution in Labyrinth Fins of Turbine Blade Crown under Thermal Cycling Load [J]. Journal of Mechanical Engineering, 2025, 61(24): 139-147.
[5]	LIU Hongxia, WANG Xiaoxiao, CUI Yuanyuan, LIU Fang, YANG Jie, CHEN Haofeng. New Coalescence Criterion for Non-collinear Parallel Double Cracks [J]. Journal of Mechanical Engineering, 2025, 61(24): 148-157.
[6]	ZHANG Shun, XUE He, ZHANG Jiaqing, WU Jun. Semi-elliptical Surface Crack Propagation of PMMA Based on Cohesive Zone Model [J]. Journal of Mechanical Engineering, 2025, 61(24): 158-167.
[7]	WANG Houxiao, LI Rui, DAI Xinmin, XIA Kaibo. Study on Hybrid Femtosecond Laser Layered Micro-hole Drilling Technique via Applying External Voltage Based on Ring Feeding [J]. Journal of Mechanical Engineering, 2025, 61(23): 240-249.
[8]	WANG Chao, YANG Bing, ZHU Tao, YANG Guangwu, XIAO Shoune. Surface Crack Propagation Life Study of Welded Structures Using Phased-array Ultrasonic Total Focusing Imaging [J]. Journal of Mechanical Engineering, 2025, 61(22): 69-79.
[9]	LI Zhiqiang, ZHANG Mingze, GUO Baoqi, CHEN Peng, WANG Tao, HUANG Qingxue. Study on the Contact Model of Clad Rolling Process and Deformation Characteristics of the Rolling Zone [J]. Journal of Mechanical Engineering, 2025, 61(22): 383-397.
[10]	HE Jiahuan, SHEN Jiacheng, LU Chun, ZHAO Jie, YUAN Bo. Research on Thermal Fatigue Crack Opening and Closing Behavior of Railway Brake Disc Based on the Virtual Crack Closure Technique [J]. Journal of Mechanical Engineering, 2025, 61(20): 103-112.
[11]	LIU Xiangyu, LI Changping, XU Moran, CHEN Jielin, LI Shujian, LI Pengnan. Study on the Mechanism and Evolution Process of Chip Formation in Electric Discharge Assisted Cutting [J]. Journal of Mechanical Engineering, 2025, 61(19): 407-419.
[12]	LIN Qiang, LIU Xing, TIAN Haidong, WANG Wenjian, DING Haohao, LIU Qiyue, GUO Jun. Research on the Influence Law of Size and Shape of Rail Crack on Alternating Current Field Measurement Signal [J]. Journal of Mechanical Engineering, 2025, 61(18): 38-49.
[13]	YANG Bing, Lü Peijin, HUANG Mian, XU Yanhui, XIAO Shoune, YANG Guangwu, ZHU Tao. Simulation of Surface Residual Stress in Railway Axles and Its Influence on Crack Propagation Behavior [J]. Journal of Mechanical Engineering, 2025, 61(18): 230-239.
[14]	ZENG Qiuming, HUANG Yi, ZHONG Shuncong, CHEN Jianxiong, ZHONG Yujie, LIN Tingling, CHEN Xuefeng. High-quality Terahertz Flexible Metal Metamaterials Fabricated by Femtosecond Laser Direct Writing [J]. Journal of Mechanical Engineering, 2025, 61(17): 281-290.
[15]	LIU Lifei, LIANG Fengshuang, WU Mingyang, ZHANG Mingde. Study on the Damage Formation Mechanism of RB-SiC Ceramics Based on Dynamic Indentation [J]. Journal of Mechanical Engineering, 2025, 61(13): 449-460.

RESEARCH ON INTERNAL CRACKS IN FORGING OF THE FLAT INGOT OF HIGH-STEELS

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments