| [1] |
SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin.
Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove
[J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
|
| [2] |
WU Hanqiang, CHEN Zhuo, YE Ximin, ZHANG Shibo, LI Sisi, ZENG Jiang, WANG Qiang, WU Yongbo.
Fundamental Research on the Ultrasonic Assisted Plasma Oxidation Modification Grinding of Titanium Alloy
[J]. Journal of Mechanical Engineering, 2024, 60(9): 13-25.
|
| [3] |
ZHOU Jingguo, ZHANG Yuhang, SUI Tianyi, XING Denghai, DONG Baokun, FU Qingyu, FU Junfan, LIN Bin.
Effect of Separation-contact on the Processing Characteristics of Ultrasonic Vibration-assisted Milling of Titanium Alloy
[J]. Journal of Mechanical Engineering, 2024, 60(9): 97-113.
|
| [4] |
ZHENG Kaikui, ZHAO Xinzhe, MOU Gang, REN Zhiying.
Surface Quality, Friction and Wear Properties of TC11 Titanium Alloy Strengthened Using Ultrasonic Rolling
[J]. Journal of Mechanical Engineering, 2024, 60(9): 137-151.
|
| [5] |
XIAO Guijian, LIU Zhenyang, HE Yi, LIU Gang, DENG Zhongcai.
Laser-assisted CBN Belt Grinding of TC4 Titanium Alloy for Material Removal Behavior and Surface Integrity Study
[J]. Journal of Mechanical Engineering, 2024, 60(9): 241-253.
|
| [6] |
WEI Rong, XU Moran, LI Changping, LI Shujian, LI Pengnan.
Modeling of Multi-energy Field and Regulation Optimization for Electric Discharge Assisted Milling (EDAM) of Titanium Alloys
[J]. Journal of Mechanical Engineering, 2024, 60(9): 393-409.
|
| [7] |
HAN Jianchao, ZHANG Mengfei, WANG Bin, GUO Shenghui, JIA Yi, WANG Tao.
Analysis of Electroplastic Constitutive Equation and Multi-physical Field Coupling of Titanium Alloy
[J]. Journal of Mechanical Engineering, 2024, 60(9): 421-433.
|
| [8] |
ZHANG Yusen, CHEN Lei, LIU Shengjie, HU Junhua, ZHANG Qifei, CUI Mingliang, HU Jianliang, JIN Miao.
Mechanism for the Macrostructure Coarse Grain of TB6 Titanium Alloy Die Forging and Its Prediction
[J]. Journal of Mechanical Engineering, 2024, 60(8): 121-131.
|
| [9] |
SUN Yue, NIU Wenlong, ZHANG Maicang.
Hot Deformation Behavior and Dynamic Recrystallization of GH4151 Superalloy
[J]. Journal of Mechanical Engineering, 2024, 60(8): 143-153.
|
| [10] |
YANG Yang, WANG Zekui, CHEN Chen, MA Hua, YANG Zhinan, ZHANG Fucheng.
Effect of Ni and Cu Alloying on Microstructure and Mechanical Properties of Fe-Mn-Al-C Austenitic Lightweight Steel
[J]. Journal of Mechanical Engineering, 2024, 60(8): 154-164.
|
| [11] |
LI Li, WANG Yixuan, LUO Fen, ZHANG Wentao, ZHAO Wei, LI Xiaoqiang.
Effect of Brazing Time on TiAl Joint Brazed with TiH2-65Ni+TiB2 Filler
[J]. Journal of Mechanical Engineering, 2024, 60(8): 176-185.
|
| [12] |
LI Kun, JI Chen, BAI Shengwen, JIANG Bin, PAN Fusheng.
Research Status and Prospects of Wire-arc Additive Manufacturing Technology for High-performance Magnesium Alloys
[J]. Journal of Mechanical Engineering, 2024, 60(7): 289-311.
|
| [13] |
ZHENG Yang, ZHAO Zihao, LIU Wei, YU Zhengzhe, NIU Wei, LEI Yiwen, SUN Ronglu.
Research Progress in High-performance Mg Alloys Prepared by Additive Manufacturing
[J]. Journal of Mechanical Engineering, 2024, 60(7): 385-400.
|
| [14] |
SHUI Youfu, LIU Jinxiang, HUANG Weiqing, ZUO Zhengxing, ZHOU Haitao, BAI Wenjun.
Investigation on Corrosion Kinetics of Cast Al-Si Alloy for Engine Cylinder Head
[J]. Journal of Mechanical Engineering, 2024, 60(6): 261-270.
|
| [15] |
WANG Boshi, CHEN Nannan, CAI Yan, WANG Min.
Low-temperature Fatigue Ductile-to-brittle Transition Behavior and Mechanism for Simulated Coarse-grained Heat-affected Zone of a High-strength Low-alloy Bainite Steel
[J]. Journal of Mechanical Engineering, 2024, 60(6): 271-278.
|
