ON THE CUTTING DEFORMATION AND CUTTING FORCE IN ULTRA-PRECISION MACHINING WITH SPDT

Abstract

Abstract: The effects of friction coefficients between workpiece materials and single point diamond tool (SPDT for short), tool sharpness and depth of cut on cutting deformation and cutting force are studied systematically. It is concluded that to improve the surface integrity of ultra-precision machining, the optim crystal plane for diamond tool and improvement of tool sharpness are very important, and that optimum crystal plane of workpiece material is also crucial in ultra-precision machining of single crystal materials.

Key words: Cutting deformation, Cutting force, Diamond tool, Ultra-precision machining

Yuan Zhejun;Yao Yangxue;Zhou Mang;Chen Suodong. ON THE CUTTING DEFORMATION AND CUTTING FORCE IN ULTRA-PRECISION MACHINING WITH SPDT[J]. , 1996, 32(5): 1-6，11.

[1]	SU Zhipeng, LIANG Zhiqiang, LI Juan, WANG Fei, WEI Zhengyi, LIU Yuehong, KIM Yoomi, MA Yue, YIN Zhen, WANG Xibin. Experimental Research on Ultrasonic Spiral Assisted Milling and Grinding of Titanium Alloy Micro Groove [J]. Journal of Mechanical Engineering, 2024, 60(9): 5-12.
[2]	FENG Yong, ZHOU Haojie, ZHOU Zhiyuan, JIA Xiaolin, QIN Yuyan, XU Weiwei. Research on Cutting Force Model of Low-frequency Torsional Vibration Assisted Helical Milling [J]. Journal of Mechanical Engineering, 2024, 60(5): 390-402.
[3]	LI Ziqing, CUI Zhangcai, BIAN Subiao, LI Huihui, LU Jing, ORIOL Arteaga, XU Xipeng. Non-destructive Measurement and Characterization of Damage Layer of Single-crystal Diamond Substrate after Ultra-precision Machining [J]. Journal of Mechanical Engineering, 2024, 60(4): 239-249.
[4]	HE Chunlei, WANG Shuqi, LI Dongyang, GENG Kun, CHEN Guang, REN Chengzu. Research Progress on the Influence of Crystalline Grain in Ultra-precision Cutting of Polycrystalline Material [J]. Journal of Mechanical Engineering, 2024, 60(3): 373-392.
[5]	DU Yuchao, LIANG Zhiqiang, WANG Fei, LI Juan, LIU Yuehong, ZHAO Xu, SU Zhipeng, MA Yue, CHEN Rui, WANG Xibin. Research on Cutting Force Modeling and Cutting Performance of PCD Micro Milling-grinding Combined Machining Tool [J]. Journal of Mechanical Engineering, 2024, 60(19): 298-309.
[6]	HE Chunlei, ZHANG Jianguo, WANG Shuqi, REN Chengzu. Investigation on Measurement Method of Ultra-precision Turning Surface Roughness Based on Multi-wavelength Scattering Characteristic [J]. Journal of Mechanical Engineering, 2023, 59(3): 308-317.
[7]	HUANG Jingshan, LIU Guoliang, SUN Hao, YAO Bin, JIN Lin, CHEN Binqiang, CAO Xincheng, WANG Shancheng, XU Hao, CAI Zhiqin. Effect of C60 Nanoparticle Cutting Fluid on Cutting Characteristics of 15Cr14Co12Mo5Ni2WA Gear Steel [J]. Journal of Mechanical Engineering, 2023, 59(23): 358-371.
[8]	LIU Hanzhong, ZHANG Ruitao, ZONG Wenjun, SUN Tao. Key Technologies and Applications for Lapping Micro Round Diamond Tools [J]. Journal of Mechanical Engineering, 2023, 59(21): 34-42.
[9]	LI Tao, HUANG Weiqi, LONG Gui, YANG Sishuo, ZHANG Jianguo, XIAO Junfeng, XU Jianfeng. Surface Topography Evolution of Single Crystal Silicon in Laser Polishing [J]. Journal of Mechanical Engineering, 2023, 59(21): 52-64.
[10]	PENG Xiaoqiang, LI Huang, WANG Yueming, GUAN Chaoliang, HU Hao, LAI Tao, XU Chao. Ultra-precision Cutting Characteristics of Convex Blazed Gratings with Electroless NiP [J]. Journal of Mechanical Engineering, 2023, 59(21): 121-130.
[11]	YANG Yang, LIN Rixiong, DU Jianjun. Study of the 3D Topography Modelling and Control Method for Blazed Gratings Induced by Ultrasonic Elliptical Vibration Cutting [J]. Journal of Mechanical Engineering, 2023, 59(17): 291-299.
[12]	WANG Hong, WANG Bing, LIU Zhanqiang, ZHAO Jinfu, SONG Qinghua. Research Progress on Machinability Improvement of Difficult-to-machine Materials with Surface Modification Methods [J]. Journal of Mechanical Engineering, 2023, 59(15): 311-332.
[13]	BAI Yuchao, CHEN Jie, LIU Linqing, WEI Xiongmian, WANG Di. Influence Mechanism of Heat Treatment on Ultra-precision Turning Characteristics of Additively Manufactured AlSi10Mg Parts [J]. Journal of Mechanical Engineering, 2022, 58(19): 315-330.
[14]	GAO Shang, LI Honggang, KANG Renke, HE Yiwei, ZHU Xianglong. Recent Advance in Preparation and Ultra-precision Machining of New Generation Semiconductor Material of β-Ga₂O₃ Single Crystals [J]. Journal of Mechanical Engineering, 2021, 57(9): 213-232.
[15]	ZHANG Yang, WU Baohai, XIA Weihong, ZHANG Ying, ZHAO Jing. Multi-objective Feed Optimization with Constant Cutting Force Constraints under Variable Cutting Depth [J]. Journal of Mechanical Engineering, 2021, 57(5): 242-250.

ON THE CUTTING DEFORMATION AND CUTTING FORCE IN ULTRA-PRECISION MACHINING WITH SPDT

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments