Research on Cutting Force Modeling and Cutting Performance of PCD Micro Milling-grinding Combined Machining Tool

doi:10.3901/JME.2024.19.298

Abstract

Abstract: A PCD micro milling-grinding combined machining tool structure with 0° side edge rake angle is proposed.The simulation model of single-edge and single-abrasive orthogonal cutting is constructed, and the mechanism of milling-grinding combined machining is analyzed.A cutting force model considering cutting edge shear force and tool flank face grinding force is constructed based on the micro-element method.According to the relationship between cutting tool structure and cutting parameters under up-milling and down-milling, the expression of cutting angle and the contact between cutting edge and workpiece are determined.On this basis, the prediction of the instantaneous cutting force of the mill is realized by fitting the shear force coefficient and grinding force coefficient through experiments, and cutting force model verification experiments are carried out on titanium alloy TC4.The experimental results show that the established cutting force model can effectively predict the cutting force in milling-grinding combined machining.The milling-grinding combined machining tool performance tests are further carried out on cemented carbide workpiece.The results show that compared with conventional PCD micro end mill, the developed PCD milling-grinding combined machining tool can effectively improve machining quality.

Key words: PCD micro milling-grinding combined machining tool, milling-grinding combined machining, cutting force model, tool performance

CLC Number:

TG714

DU Yuchao, LIANG Zhiqiang, WANG Fei, LI Juan, LIU Yuehong, ZHAO Xu, SU Zhipeng, MA Yue, CHEN Rui, WANG Xibin. Research on Cutting Force Modeling and Cutting Performance of PCD Micro Milling-grinding Combined Machining Tool[J]. Journal of Mechanical Engineering, 2024, 60(19): 298-309.

References

[1] ZHAO W， IQUBAL A，DING F，et al. Experimental study on the meso-scale milling of tungsten carbide WC-17.5Co with PCD end mills[J]. Adv Manuf，2020，8：230-241.
[2] 梁志强，李世迪，周天丰，等. 等法向前角和等径向后角微细球头铣刀刃磨研究[J]. 机械工程学报，2019，55(5)：196-203. LIANG Zhiqiang，LI Shidi，ZHOU Tianfeng，et al. Research on grinding of micro ball end mill with equal normal rake angle and equal radial relief angle[J]. Journal of Mechanical Engineering，2019，55(5)：196-203.
[3] ZHOU L，PENG F Y，YAN R，et al. Analytical modeling and experimental validation of micro end-milling cutting forces considering edge radius and material strengthening effects[J]. Int J Mach Tools Manuf，2015，97：29-41.
[4] CHENG X，WANG ZG，Nakamoto K，et al. Design and development of PCD micro straight edge end mills for micro/nano machining of hard and brittle materials[J]. J Mech Sci Technol，2010，24：2261-2268.
[5] Gao P，Liang ZQ，Wang XB，et al. Cutting edge damage in grinding of cemented carbides micro end mills[J]. Ceram Int，2017，43：11331-11338.
[6] Zhan ZB，He N，Li L，et al. Precision milling of tungsten carbide with micro PCD milling tool[J]. Int J Adv Manuf Technol，2015，77：2095-2103.
[7] Cheng X，Wang ZG，Nakamoto K，et al. Design and development of a micro polycrystalline diamond ball end mill for micro/nano freeform machining of hard and brittle materials[J]. J. Micromech. Microeng，2009，19：115022
[8] Chen N，Chen MJ，Wu CY，et al. The design and optimization of micro polycrystalline diamond ballend mill for repairing micro-defects on the surface of KDP crystal[J]. Precis Eng，2016，43：345-355.
[9] Wang C，Gong YD，Cheng J，et al. Fabrication and evaluation of micromill-grinding tools by electroplating CBN[J]. Int J Adv Manuf Technol，2016，87：3513-3526.
[10] Wang C，Gong YD，Yin GQ，et al. Study on micro mill-grinding technology[J]. Appl Mech Mater，2013，390：586-590.
[11] Wen XL，Gong YD，Wang C. Experimental research on micro mill-grinding AISI 1045 steel with a cold spraying compound micro cutting tool[J]. J Mech Sci Technol，2018，32：5863-5874.
[12] Katahira K，Takesue S，Komotori J，et al. Micromilling characteristics and electrochemically assisted reconditioning of polycrystalline diamond tool surfaces for ultra-precision machining of high-purity SiC[J]. CIRP Ann-Manuf Techn，2014，63：329-332.
[13] Katahira K，Ohmori H，Takesue S，et al. Effect of atmospheric-pressure plasma jet on polycrystalline diamond micro-milling of silicon carbide[J]. CIRP Ann-Manuf Techn，2015，64：129-132.
[14] 朱锟鹏，李科选，梅涛，等.微铣削力建模研究进展[J]. 机械工程学报，2016，52(17)：20-34. ZHU Kunpeng，Li Kexuan，Mei Tao，et al. Research progress of micro-milling force modeling[J]. Journal of Mechanical Engineering，2016，52(17)：20-34.
[15] Kim G M，Cho P J，Chu C N. Cutting force prediction of sculptured surface ball-end milling using Z-map[J]. International Journal of Machine Tools & Manufacture，2000，40(2)：277-291.
[16] Maeng S J，Lee P A，Kim B H，et al. An analytical model for grinding force prediction in ultra-precision machining of WC with PCD micro grinding tool[J]. Int J Pr Eng Man-Gt 2020，7：1031-1045.
[17] CHEN S T，JIANG Z H. A force controlled grinding-milling technique for quartz-glass micromachining[J]. J Mater Process Tech 2015，216：206-215.
[18] Fu Z t，Yang W y，Wang X l，et al. An analytical force model for ball-end milling based on a predictive machining theory considering cutter runout[J]. International Journal of Advanced Manufacturing Technology，2016，84(9-12)：2449-2460.
[19] Graham E，Park CI，Park SS. Force modeling and applications of inclined ball end milling of micro-dimpled surfaces[J]. The International Journal of Advanced Manufacturing Technology，2014，70(1-4)：689-700.
[20] 罗智文，赵文祥，焦黎，等. 平面曲线端铣加工过程铣削力的建模与预测[J].兵工学报，2015，36(9)：1727-1735. Luo Zhiwen，Zhao Wenxiang，Jiao li，et al. Modeling and prediction of milling force in the process of plane curve end milling[J]. Acta Armamentarius，2015，36(9)：1727-1735.
[21] Zhu R，Kapoor S G，Devor R E. Mechanistic modeling of the ball end milling process for multi-axis machining of free-form surfaces[J]. Journal of Manufacturing Science & Engineering，2001，123(3)：369-379.
[22] Jun M ，Goo C ，Malekian M，et al. A new mechanistic approach for micro end milling force modeling[J] Journal of Manufacturing Science and Engineering，2012，134：925-933.
[23] Wen J，Peng F Y，Lin S，et al. Cutting force modeling and prediction in end milling including flank wear[J]. Advanced Materials Research，2013，690-693：2427-2436.
[24] Zhou Y，Tian Y，Jing X，et al. A novel instantaneous uncut chip thickness model for mechanistic cutting force model in micro-end-milling[J]. International Journal of Advanced Manufacturing Technology，2017，93(1)：2305-2319.
[25] Maeng S J，Lee P A，Kim B H，et al. An analytical model for grinding force prediction in ultra-precision machining of WC with PCD micro grinding tool[J]. Int J Pr Eng Man-Gt，2020，7：1031-1045.
[26] Liang Z Q，Du Y C，Ma Y，et al. Development of polycrystalline diamond micro end mill for milling-grinding combined machining of cemented carbide[J]. J Manuf Process，2022，79：844-853.
[27] Gong Y D，Wang C，Yin G Q，et al. Finite element simulation of minimum uncut chip thickness in micro mill-grinding Ti6Al4V based on single-edge single-grit model[J]. Adv Mat Res，2013，797：622-627.
[28] Yuan H，Zhao W X，Liang Z Q，et al. Structural design and fabrication of polycrystalline diamond micro ball-end mill[J]. Int J Adv Manuf Technol 2020，108：1899-1911.